Merge tag 'net-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter, and can.

  We'll have one more fix for a socket accounting regression, it's still
  getting polished. Otherwise things look fine.

  Current release - regressions:

   - revert "vrf: reset skb conntrack connection on VRF rcv", there are
     valid uses for previous behavior

   - can: m_can: fix iomap_read_fifo() and iomap_write_fifo()

  Current release - new code bugs:

   - mlx5: e-switch, return correct error code on group creation failure

  Previous releases - regressions:

   - sctp: fix transport encap_port update in sctp_vtag_verify

   - stmmac: fix E2E delay mechanism (in PTP timestamping)

  Previous releases - always broken:

   - netfilter: ip6t_rt: fix out-of-bounds read of ipv6_rt_hdr

   - netfilter: xt_IDLETIMER: fix out-of-bound read caused by lack of
     init

   - netfilter: ipvs: make global sysctl read-only in non-init netns

   - tcp: md5: fix selection between vrf and non-vrf keys

   - ipv6: count rx stats on the orig netdev when forwarding

   - bridge: mcast: use multicast_membership_interval for IGMPv3

   - can:
      - j1939: fix UAF for rx_kref of j1939_priv abort sessions on
        receiving bad messages

      - isotp: fix TX buffer concurrent access in isotp_sendmsg() fix
        return error on FC timeout on TX path

   - ice: fix re-init of RDMA Tx queues and crash if RDMA was not inited

   - hns3: schedule the polling again when allocation fails, prevent
     stalls

   - drivers: add missing of_node_put() when aborting
     for_each_available_child_of_node()

   - ptp: fix possible memory leak and UAF in ptp_clock_register()

   - e1000e: fix packet loss in burst mode on Tiger Lake and later

   - mlx5e: ipsec: fix more checksum offload issues"

* tag 'net-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits)
  usbnet: sanity check for maxpacket
  net: enetc: make sure all traffic classes can send large frames
  net: enetc: fix ethtool counter name for PM0_TERR
  ptp: free 'vclock_index' in ptp_clock_release()
  sfc: Don't use netif_info before net_device setup
  sfc: Export fibre-specific supported link modes
  net/mlx5e: IPsec: Fix work queue entry ethernet segment checksum flags
  net/mlx5e: IPsec: Fix a misuse of the software parser's fields
  net/mlx5e: Fix vlan data lost during suspend flow
  net/mlx5: E-switch, Return correct error code on group creation failure
  net/mlx5: Lag, change multipath and bonding to be mutually exclusive
  ice: Add missing E810 device ids
  igc: Update I226_K device ID
  e1000e: Fix packet loss on Tiger Lake and later
  e1000e: Separate TGP board type from SPT
  ptp: Fix possible memory leak in ptp_clock_register()
  net: stmmac: Fix E2E delay mechanism
  nfc: st95hf: Make spi remove() callback return zero
  net: hns3: disable sriov before unload hclge layer
  net: hns3: fix vf reset workqueue cannot exit
  ...

Documentation/networking/devlink/ice.rst

@@ -30,10 +30,11 @@ The ``ice`` driver reports the following versions
         PHY, link, etc.
     * - ``fw.mgmt.api``
       - running
-      - 1.5
-      - 2-digit version number of the API exported over the AdminQ by the
-        management firmware. Used by the driver to identify what commands
-        are supported.
+      - 1.5.1
+      - 3-digit version number (major.minor.patch) of the API exported over
+        the AdminQ by the management firmware. Used by the driver to
+        identify what commands are supported. Historical versions of the
+        kernel only displayed a 2-digit version number (major.minor).
     * - ``fw.mgmt.build``
       - running
       - 0x305d955f

Documentation/networking/mctp.rst

@@ -59,11 +59,11 @@ specified with a ``sockaddr`` type, with a single-byte endpoint address:
     };
 
     struct sockaddr_mctp {
-            unsigned short int	smctp_family;
-            int			smctp_network;
-            struct mctp_addr	smctp_addr;
-            __u8		smctp_type;
-            __u8		smctp_tag;
+            __kernel_sa_family_t smctp_family;
+            unsigned int         smctp_network;
+            struct mctp_addr     smctp_addr;
+            __u8                 smctp_type;
+            __u8                 smctp_tag;
     };
 
     #define MCTP_NET_ANY	0x0

drivers/isdn/hardware/mISDN/hfcpci.c

@@ -1994,14 +1994,14 @@ setup_hw(struct hfc_pci *hc)
 	pci_set_master(hc->pdev);
 	if (!hc->irq) {
 		printk(KERN_WARNING "HFC-PCI: No IRQ for PCI card found\n");
-		return 1;
+		return -EINVAL;
 	}
 	hc->hw.pci_io =
 		(char __iomem *)(unsigned long)hc->pdev->resource[1].start;
 
 	if (!hc->hw.pci_io) {
 		printk(KERN_WARNING "HFC-PCI: No IO-Mem for PCI card found\n");
-		return 1;
+		return -ENOMEM;
 	}
 	/* Allocate memory for FIFOS */
 	/* the memory needs to be on a 32k boundary within the first 4G */
@@ -2012,7 +2012,7 @@ setup_hw(struct hfc_pci *hc)
 	if (!buffer) {
 		printk(KERN_WARNING
 		       "HFC-PCI: Error allocating memory for FIFO!\n");
-		return 1;
+		return -ENOMEM;
 	}
 	hc->hw.fifos = buffer;
 	pci_write_config_dword(hc->pdev, 0x80, hc->hw.dmahandle);
@@ -2022,7 +2022,7 @@ setup_hw(struct hfc_pci *hc)
 		       "HFC-PCI: Error in ioremap for PCI!\n");
 		dma_free_coherent(&hc->pdev->dev, 0x8000, hc->hw.fifos,
 				  hc->hw.dmahandle);
-		return 1;
+		return -ENOMEM;
 	}
 
 	printk(KERN_INFO

drivers/net/can/m_can/m_can_platform.c

@@ -32,8 +32,13 @@ static u32 iomap_read_reg(struct m_can_classdev *cdev, int reg)
 static int iomap_read_fifo(struct m_can_classdev *cdev, int offset, void *val, size_t val_count)
 {
 	struct m_can_plat_priv *priv = cdev_to_priv(cdev);
+	void __iomem *src = priv->mram_base + offset;
 
-	ioread32_rep(priv->mram_base + offset, val, val_count);
+	while (val_count--) {
+		*(unsigned int *)val = ioread32(src);
+		val += 4;
+		src += 4;
+	}
 
 	return 0;
 }
@@ -51,8 +56,13 @@ static int iomap_write_fifo(struct m_can_classdev *cdev, int offset,
 			    const void *val, size_t val_count)
 {
 	struct m_can_plat_priv *priv = cdev_to_priv(cdev);
+	void __iomem *dst = priv->mram_base + offset;
 
-	iowrite32_rep(priv->base + offset, val, val_count);
+	while (val_count--) {
+		iowrite32(*(unsigned int *)val, dst);
+		val += 4;
+		dst += 4;
+	}
 
 	return 0;
 }

drivers/net/can/rcar/rcar_can.c

@@ -846,10 +846,12 @@ static int __maybe_unused rcar_can_suspend(struct device *dev)
 	struct rcar_can_priv *priv = netdev_priv(ndev);
 	u16 ctlr;
 
-	if (netif_running(ndev)) {
-		netif_stop_queue(ndev);
-		netif_device_detach(ndev);
-	}
+	if (!netif_running(ndev))
+		return 0;
+
+	netif_stop_queue(ndev);
+	netif_device_detach(ndev);
+
 	ctlr = readw(&priv->regs->ctlr);
 	ctlr |= RCAR_CAN_CTLR_CANM_HALT;
 	writew(ctlr, &priv->regs->ctlr);
@@ -868,6 +870,9 @@ static int __maybe_unused rcar_can_resume(struct device *dev)
 	u16 ctlr;
 	int err;
 
+	if (!netif_running(ndev))
+		return 0;
+
 	err = clk_enable(priv->clk);
 	if (err) {
 		netdev_err(ndev, "clk_enable() failed, error %d\n", err);
@@ -881,10 +886,9 @@ static int __maybe_unused rcar_can_resume(struct device *dev)
 	writew(ctlr, &priv->regs->ctlr);
 	priv->can.state = CAN_STATE_ERROR_ACTIVE;
 
-	if (netif_running(ndev)) {
-		netif_device_attach(ndev);
-		netif_start_queue(ndev);
-	}
+	netif_device_attach(ndev);
+	netif_start_queue(ndev);
+
 	return 0;
 }
 

drivers/net/can/sja1000/peak_pci.c

@@ -752,16 +752,15 @@ static void peak_pci_remove(struct pci_dev *pdev)
 		struct net_device *prev_dev = chan->prev_dev;
 
 		dev_info(&pdev->dev, "removing device %s\n", dev->name);
+		/* do that only for first channel */
+		if (!prev_dev && chan->pciec_card)
+			peak_pciec_remove(chan->pciec_card);
 		unregister_sja1000dev(dev);
 		free_sja1000dev(dev);
 		dev = prev_dev;
 
-		if (!dev) {
-			/* do that only for first channel */
-			if (chan->pciec_card)
-				peak_pciec_remove(chan->pciec_card);
+		if (!dev)
 			break;
-		}
 		priv = netdev_priv(dev);
 		chan = priv->priv;
 	}

drivers/net/can/usb/peak_usb/pcan_usb_fd.c

@@ -551,11 +551,10 @@ static int pcan_usb_fd_decode_status(struct pcan_usb_fd_if *usb_if,
 	} else if (sm->channel_p_w_b & PUCAN_BUS_WARNING) {
 		new_state = CAN_STATE_ERROR_WARNING;
 	} else {
-		/* no error bit (so, no error skb, back to active state) */
-		dev->can.state = CAN_STATE_ERROR_ACTIVE;
+		/* back to (or still in) ERROR_ACTIVE state */
+		new_state = CAN_STATE_ERROR_ACTIVE;
 		pdev->bec.txerr = 0;
 		pdev->bec.rxerr = 0;
-		return 0;
 	}
 
 	/* state hasn't changed */
@@ -568,8 +567,7 @@ static int pcan_usb_fd_decode_status(struct pcan_usb_fd_if *usb_if,
 
 	/* allocate an skb to store the error frame */
 	skb = alloc_can_err_skb(netdev, &cf);
-	if (skb)
-		can_change_state(netdev, cf, tx_state, rx_state);
+	can_change_state(netdev, cf, tx_state, rx_state);
 
 	/* things must be done even in case of OOM */
 	if (new_state == CAN_STATE_BUS_OFF)

drivers/net/dsa/lantiq_gswip.c

@@ -230,7 +230,7 @@
 #define GSWIP_SDMA_PCTRLp(p)		(0xBC0 + ((p) * 0x6))
 #define  GSWIP_SDMA_PCTRL_EN		BIT(0)	/* SDMA Port Enable */
 #define  GSWIP_SDMA_PCTRL_FCEN		BIT(1)	/* Flow Control Enable */
-#define  GSWIP_SDMA_PCTRL_PAUFWD	BIT(1)	/* Pause Frame Forwarding */
+#define  GSWIP_SDMA_PCTRL_PAUFWD	BIT(3)	/* Pause Frame Forwarding */
 
 #define GSWIP_TABLE_ACTIVE_VLAN		0x01
 #define GSWIP_TABLE_VLAN_MAPPING	0x02

drivers/net/dsa/mt7530.c

@@ -1035,9 +1035,6 @@ mt7530_port_enable(struct dsa_switch *ds, int port,
 {
 	struct mt7530_priv *priv = ds->priv;
 
-	if (!dsa_is_user_port(ds, port))
-		return 0;
-
 	mutex_lock(&priv->reg_mutex);
 
 	/* Allow the user port gets connected to the cpu port and also
@@ -1060,9 +1057,6 @@ mt7530_port_disable(struct dsa_switch *ds, int port)
 {
 	struct mt7530_priv *priv = ds->priv;
 
-	if (!dsa_is_user_port(ds, port))
-		return;
-
 	mutex_lock(&priv->reg_mutex);
 
 	/* Clear up all port matrix which could be restored in the next
@@ -3211,7 +3205,7 @@ mt7530_probe(struct mdio_device *mdiodev)
 		return -ENOMEM;
 
 	priv->ds->dev = &mdiodev->dev;
-	priv->ds->num_ports = DSA_MAX_PORTS;
+	priv->ds->num_ports = MT7530_NUM_PORTS;
 
 	/* Use medatek,mcm property to distinguish hardware type that would
 	 * casues a little bit differences on power-on sequence.

drivers/net/ethernet/cavium/thunder/nic_main.c

@@ -1193,7 +1193,7 @@ static int nic_register_interrupts(struct nicpf *nic)
 		dev_err(&nic->pdev->dev,
 			"Request for #%d msix vectors failed, returned %d\n",
 			   nic->num_vec, ret);
-		return 1;
+		return ret;
 	}
 
 	/* Register mailbox interrupt handler */

drivers/net/ethernet/cavium/thunder/nicvf_main.c

@@ -1224,7 +1224,7 @@ static int nicvf_register_misc_interrupt(struct nicvf *nic)
 	if (ret < 0) {
 		netdev_err(nic->netdev,
 			   "Req for #%d msix vectors failed\n", nic->num_vec);
-		return 1;
+		return ret;
 	}
 
 	sprintf(nic->irq_name[irq], "%s Mbox", "NICVF");
@@ -1243,7 +1243,7 @@ static int nicvf_register_misc_interrupt(struct nicvf *nic)
 	if (!nicvf_check_pf_ready(nic)) {
 		nicvf_disable_intr(nic, NICVF_INTR_MBOX, 0);
 		nicvf_unregister_interrupts(nic);
-		return 1;
+		return -EIO;
 	}
 
 	return 0;

drivers/net/ethernet/freescale/enetc/enetc_ethtool.c

@@ -157,7 +157,7 @@ static const struct {
 	{ ENETC_PM0_TFRM,   "MAC tx frames" },
 	{ ENETC_PM0_TFCS,   "MAC tx fcs errors" },
 	{ ENETC_PM0_TVLAN,  "MAC tx VLAN frames" },
-	{ ENETC_PM0_TERR,   "MAC tx frames" },
+	{ ENETC_PM0_TERR,   "MAC tx frame errors" },
 	{ ENETC_PM0_TUCA,   "MAC tx unicast frames" },
 	{ ENETC_PM0_TMCA,   "MAC tx multicast frames" },
 	{ ENETC_PM0_TBCA,   "MAC tx broadcast frames" },

drivers/net/ethernet/freescale/enetc/enetc_pf.c

@@ -517,10 +517,13 @@ static void enetc_port_si_configure(struct enetc_si *si)
 
 static void enetc_configure_port_mac(struct enetc_hw *hw)
 {
+	int tc;
+
 	enetc_port_wr(hw, ENETC_PM0_MAXFRM,
 		      ENETC_SET_MAXFRM(ENETC_RX_MAXFRM_SIZE));
 
-	enetc_port_wr(hw, ENETC_PTCMSDUR(0), ENETC_MAC_MAXFRM_SIZE);
+	for (tc = 0; tc < 8; tc++)
+		enetc_port_wr(hw, ENETC_PTCMSDUR(tc), ENETC_MAC_MAXFRM_SIZE);
 
 	enetc_port_wr(hw, ENETC_PM0_CMD_CFG, ENETC_PM0_CMD_PHY_TX_EN |
 		      ENETC_PM0_CMD_TXP	| ENETC_PM0_PROMISC);

drivers/net/ethernet/hisilicon/hns3/hnae3.c

@@ -10,6 +10,27 @@ static LIST_HEAD(hnae3_ae_algo_list);
 static LIST_HEAD(hnae3_client_list);
 static LIST_HEAD(hnae3_ae_dev_list);
 
+void hnae3_unregister_ae_algo_prepare(struct hnae3_ae_algo *ae_algo)
+{
+	const struct pci_device_id *pci_id;
+	struct hnae3_ae_dev *ae_dev;
+
+	if (!ae_algo)
+		return;
+
+	list_for_each_entry(ae_dev, &hnae3_ae_dev_list, node) {
+		if (!hnae3_get_bit(ae_dev->flag, HNAE3_DEV_INITED_B))
+			continue;
+
+		pci_id = pci_match_id(ae_algo->pdev_id_table, ae_dev->pdev);
+		if (!pci_id)
+			continue;
+		if (IS_ENABLED(CONFIG_PCI_IOV))
+			pci_disable_sriov(ae_dev->pdev);
+	}
+}
+EXPORT_SYMBOL(hnae3_unregister_ae_algo_prepare);
+
 /* we are keeping things simple and using single lock for all the
  * list. This is a non-critical code so other updations, if happen
  * in parallel, can wait.

drivers/net/ethernet/hisilicon/hns3/hnae3.h

@@ -853,6 +853,7 @@ struct hnae3_handle {
 int hnae3_register_ae_dev(struct hnae3_ae_dev *ae_dev);
 void hnae3_unregister_ae_dev(struct hnae3_ae_dev *ae_dev);
 
+void hnae3_unregister_ae_algo_prepare(struct hnae3_ae_algo *ae_algo);
 void hnae3_unregister_ae_algo(struct hnae3_ae_algo *ae_algo);
 void hnae3_register_ae_algo(struct hnae3_ae_algo *ae_algo);