Merge tag 'drm-misc-next-2019-12-16' of git://anongit.freedesktop.org…

…/drm/drm-misc into drm-next

drm-misc-next for v5.6:

UAPI Changes:
- Add support for DMA-BUF HEAPS.

Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.

Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.

Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com

Documentation/devicetree/bindings/display/dsi-controller.yaml

@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/dsi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for DSI Display Panels
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  This document defines device tree properties common to DSI, Display
+  Serial Interface controllers and attached panels. It doesn't constitute
+  a device tree binding specification by itself but is meant to be referenced
+  by device tree bindings.
+
+  When referenced from panel device tree bindings the properties defined in
+  this document are defined as follows. The panel device tree bindings are
+  responsible for defining whether each property is required or optional.
+
+  Notice: this binding concerns DSI panels connected directly to a master
+  without any intermediate port graph to the panel. Each DSI master
+  can control one to four virtual channels to one panel. Each virtual
+  channel should have a node "panel" for their virtual channel with their
+  reg-property set to the virtual channel number, usually there is just
+  one virtual channel, number 0.
+
+properties:
+  $nodename:
+    pattern: "^dsi-controller(@.*)?$"
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^panel@[0-3]$":
+    description: Panels connected to the DSI link
+    type: object
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 3
+        description:
+          The virtual channel number of a DSI peripheral. Must be in the range
+          from 0 to 3, as DSI uses a 2-bit addressing scheme. Some DSI
+          peripherals respond to more than a single virtual channel. In that
+          case the reg property can take multiple entries, one for each virtual
+          channel that the peripheral responds to.
+
+      clock-master:
+        type: boolean
+        description:
+           Should be enabled if the host is being used in conjunction with
+           another DSI host to drive the same peripheral. Hardware supporting
+           such a configuration generally requires the data on both the busses
+           to be driven by the same clock. Only the DSI host instance
+           controlling this clock should contain this property.
+
+      enforce-video-mode:
+        type: boolean
+        description:
+          The best option is usually to run a panel in command mode, as this
+          gives better control over the panel hardware. However for different
+          reasons like broken hardware, missing features or testing, it may be
+          useful to be able to force a command mode-capable panel into video
+          mode.
+
+    required:
+      - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    dsi-controller@a0351000 {
+        reg = <0xa0351000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "sony,acx424akp";
+            reg = <0>;
+            vddi-supply = <&ab8500_ldo_aux1_reg>;
+            reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+        };
+    };
+
+...

Documentation/devicetree/bindings/display/ingenic,lcd.txt

@@ -4,6 +4,7 @@ Required properties:
 - compatible: one of:
   * ingenic,jz4740-lcd
   * ingenic,jz4725b-lcd
+  * ingenic,jz4770-lcd
 - reg: LCD registers location and length
 - clocks: LCD pixclock and device clock specifiers.
 	   The device clock is only required on the JZ4740.

Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml

@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/logicpd,type28.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Logic PD Type 28 4.3" WQVGA TFT LCD panel
+
+maintainers:
+  - Adam Ford <aford173@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: logicpd,type28
+
+  power-supply: true
+  enable-gpios: true
+  backlight: true
+  port: true
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    lcd0: display {
+      compatible = "logicpd,type28";
+      enable-gpios = <&gpio5 27 0>;
+      backlight = <&backlight>;
+      port {
+        lcd_in: endpoint {
+          remote-endpoint = <&dpi_out>;
+        };
+      };
+    };
+
+...

Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml

@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sony,acx424akp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony ACX424AKP 4" 480x864 AMOLED panel
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: sony,acx424akp
+  reg: true
+  reset-gpios: true
+  vddi-supply:
+     description: regulator that supplies the vddi voltage
+  enforce-video-mode: true
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi-controller@a0351000 {
+        compatible = "ste,mcde-dsi";
+        reg = <0xa0351000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "sony,acx424akp";
+            reg = <0>;
+            vddi-supply = <&foo>;
+            reset-gpios = <&foo_gpio 0 GPIO_ACTIVE_LOW>;
+        };
+    };
+
+...

Documentation/gpu/drm-internals.rst

@@ -24,9 +24,9 @@ Driver Initialization
 At the core of every DRM driver is a :c:type:`struct drm_driver
 <drm_driver>` structure. Drivers typically statically initialize
 a drm_driver structure, and then pass it to
-:c:func:`drm_dev_alloc()` to allocate a device instance. After the
+drm_dev_alloc() to allocate a device instance. After the
 device instance is fully initialized it can be registered (which makes
-it accessible from userspace) using :c:func:`drm_dev_register()`.
+it accessible from userspace) using drm_dev_register().
 
 The :c:type:`struct drm_driver <drm_driver>` structure
 contains static information that describes the driver and features it

Documentation/gpu/drm-kms.rst

@@ -3,7 +3,7 @@ Kernel Mode Setting (KMS)
 =========================
 
 Drivers must initialize the mode setting core by calling
-:c:func:`drm_mode_config_init()` on the DRM device. The function
+drm_mode_config_init() on the DRM device. The function
 initializes the :c:type:`struct drm_device <drm_device>`
 mode_config field and never fails. Once done, mode configuration must
 be setup by initializing the following fields.
@@ -181,8 +181,7 @@ Setting`_). The somewhat surprising part here is that properties are not
 directly instantiated on each object, but free-standing mode objects themselves,
 represented by :c:type:`struct drm_property <drm_property>`, which only specify
 the type and value range of a property. Any given property can be attached
-multiple times to different objects using :c:func:`drm_object_attach_property()
-<drm_object_attach_property>`.
+multiple times to different objects using drm_object_attach_property().
 
 .. kernel-doc:: include/drm/drm_mode_object.h
    :internal:
@@ -260,7 +259,8 @@ Taken all together there's two consequences for the atomic design:
   drm_connector_state <drm_connector_state>` for connectors. These are the only
   objects with userspace-visible and settable state. For internal state drivers
   can subclass these structures through embeddeding, or add entirely new state
-  structures for their globally shared hardware functions.
+  structures for their globally shared hardware functions, see :c:type:`struct
+  drm_private_state<drm_private_state>`.
 
 - An atomic update is assembled and validated as an entirely free-standing pile
   of structures within the :c:type:`drm_atomic_state <drm_atomic_state>`
@@ -269,6 +269,14 @@ Taken all together there's two consequences for the atomic design:
   to the driver and modeset objects. This way rolling back an update boils down
   to releasing memory and unreferencing objects like framebuffers.
 
+Locking of atomic state structures is internally using :c:type:`struct
+drm_modeset_lock <drm_modeset_lock>`. As a general rule the locking shouldn't be
+exposed to drivers, instead the right locks should be automatically acquired by
+any function that duplicates or peeks into a state, like e.g.
+drm_atomic_get_crtc_state().  Locking only protects the software data
+structure, ordering of committing state changes to hardware is sequenced using
+:c:type:`struct drm_crtc_commit <drm_crtc_commit>`.
+
 Read on in this chapter, and also in :ref:`drm_atomic_helper` for more detailed
 coverage of specific topics.
 
@@ -479,6 +487,9 @@ Color Management Properties
 .. kernel-doc:: drivers/gpu/drm/drm_color_mgmt.c
    :export:
 
+.. kernel-doc:: include/drm/drm_color_mgmt.h
+   :internal:
+
 Tile Group Property
 -------------------