iio: imu: bmi270: fix initial sampling frequency configuration

In the bmi270_configure_imu() function, the accelerometer and gyroscope
configuration registers are incorrectly written with the mask
BMI270_PWR_CONF_ADV_PWR_SAVE_MSK, which is unrelated to these registers.

As a result, the accelerometer's sampling frequency is set to 200 Hz
instead of the intended 100 Hz.

Remove the mask to ensure the correct bits are set in the configuration
registers.

Fixes: 3ea5154 ("iio: imu: Add i2c driver for bmi270 imu")
Signed-off-by: Gustavo Silva <gustavograzs@gmail.com>
Reviewed-by: Alex Lanzano <lanzano.alex@gmail.com>
Link: https://patch.msgid.link/20250304-bmi270-odr-fix-v1-1-384dbcd699fb@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

drivers/iio/imu/bmi270/bmi270_core.c

@@ -918,17 +918,15 @@ static int bmi270_configure_imu(struct bmi270_data *data)
 			      FIELD_PREP(BMI270_ACC_CONF_ODR_MSK,
 					 BMI270_ACC_CONF_ODR_100HZ) |
 			      FIELD_PREP(BMI270_ACC_CONF_BWP_MSK,
-					 BMI270_ACC_CONF_BWP_NORMAL_MODE) |
-			      BMI270_PWR_CONF_ADV_PWR_SAVE_MSK);
+					 BMI270_ACC_CONF_BWP_NORMAL_MODE));
 	if (ret)
 		return dev_err_probe(dev, ret, "Failed to configure accelerometer");
 
 	ret = regmap_set_bits(regmap, BMI270_GYR_CONF_REG,
 			      FIELD_PREP(BMI270_GYR_CONF_ODR_MSK,
 					 BMI270_GYR_CONF_ODR_200HZ) |
 			      FIELD_PREP(BMI270_GYR_CONF_BWP_MSK,
-					 BMI270_GYR_CONF_BWP_NORMAL_MODE) |
-			      BMI270_PWR_CONF_ADV_PWR_SAVE_MSK);
+					 BMI270_GYR_CONF_BWP_NORMAL_MODE));
 	if (ret)
 		return dev_err_probe(dev, ret, "Failed to configure gyroscope");