arm64: dts: ti: k3-am625: Introduce operating-points table

Introduce an operating-points table for the A53 cores, containing only
frequency values as this platform operates on a fixed voltage for the
CPUs. Also provide opp-supported-hw values to ensure appropriate OPPs
are enabled based on which type of silicon is in use.

The latency between pre and post frequency transition was measured in
CPUFreq driver for all combinations of OPP changes. The average value
was selected as overall clock-latency-ns.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

arch/arm64/boot/dts/ti/k3-am625.dtsi

@@ -48,6 +48,8 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&L2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&k3_clks 135 0>;
 		};
 
 		cpu1: cpu@1 {
@@ -62,6 +64,8 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&L2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&k3_clks 136 0>;
 		};
 
 		cpu2: cpu@2 {
@@ -76,6 +80,8 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&L2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&k3_clks 137 0>;
 		};
 
 		cpu3: cpu@3 {
@@ -90,6 +96,51 @@
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&L2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&k3_clks 138 0>;
+		};
+	};
+
+	a53_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		opp-shared;
+		syscon = <&wkup_conf>;
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-supported-hw = <0x01 0x0006>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-1250000000 {
+			opp-hz = /bits/ 64 <1250000000>;
+			opp-supported-hw = <0x01 0x0004>;
+			clock-latency-ns = <6000000>;
+			opp-suspend;
 		};
 	};