Merge tag 'iio-fixes-5.0a' of git://git.kernel.org/pub/scm/linux/kern…

…el/git/jic23/iio into staging-linus

Jonathan writes:

First set of IIO fixes for the 5.0 cycle.

Been a busy month, so these are rather later than they should have been.

* atlas-ph-sensor:
  - Temperature scale didn't correspond to the ABI.
* axp288:
  - A few different fixes around the TS-pin handling.
* ti-ads8688
  - Not enough space in the buffer used to build the scan to allow for
    the timestamp.
* tools - iio_generic_buffer
  - Make num_loops signed so that we really are running for ever
    rather than just a long time when we specify -1.

* tag 'iio-fixes-5.0a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  iio: ti-ads8688: Update buffer allocation for timestamps
  tools: iio: iio_generic_buffer: make num_loops signed
  iio: adc: axp288: Fix TS-pin handling
  iio: chemical: atlas-ph-sensor: correct IIO_TEMP values to millicelsius

drivers/iio/adc/axp288_adc.c

@@ -27,9 +27,18 @@
 #include <linux/iio/machine.h>
 #include <linux/iio/driver.h>
 
-#define AXP288_ADC_EN_MASK		0xF1
-#define AXP288_ADC_TS_PIN_GPADC		0xF2
-#define AXP288_ADC_TS_PIN_ON		0xF3
+/*
+ * This mask enables all ADCs except for the battery temp-sensor (TS), that is
+ * left as-is to avoid breaking charging on devices without a temp-sensor.
+ */
+#define AXP288_ADC_EN_MASK				0xF0
+#define AXP288_ADC_TS_ENABLE				0x01
+
+#define AXP288_ADC_TS_CURRENT_ON_OFF_MASK		GENMASK(1, 0)
+#define AXP288_ADC_TS_CURRENT_OFF			(0 << 0)
+#define AXP288_ADC_TS_CURRENT_ON_WHEN_CHARGING		(1 << 0)
+#define AXP288_ADC_TS_CURRENT_ON_ONDEMAND		(2 << 0)
+#define AXP288_ADC_TS_CURRENT_ON			(3 << 0)
 
 enum axp288_adc_id {
 	AXP288_ADC_TS,
@@ -44,6 +53,7 @@ enum axp288_adc_id {
 struct axp288_adc_info {
 	int irq;
 	struct regmap *regmap;
+	bool ts_enabled;
 };
 
 static const struct iio_chan_spec axp288_adc_channels[] = {
@@ -115,21 +125,33 @@ static int axp288_adc_read_channel(int *val, unsigned long address,
 	return IIO_VAL_INT;
 }
 
-static int axp288_adc_set_ts(struct regmap *regmap, unsigned int mode,
-				unsigned long address)
+/*
+ * The current-source used for the battery temp-sensor (TS) is shared
+ * with the GPADC. For proper fuel-gauge and charger operation the TS
+ * current-source needs to be permanently on. But to read the GPADC we
+ * need to temporary switch the TS current-source to ondemand, so that
+ * the GPADC can use it, otherwise we will always read an all 0 value.
+ */
+static int axp288_adc_set_ts(struct axp288_adc_info *info,
+			     unsigned int mode, unsigned long address)
 {
 	int ret;
 
-	/* channels other than GPADC do not need to switch TS pin */
+	/* No need to switch the current-source if the TS pin is disabled */
+	if (!info->ts_enabled)
+		return 0;
+
+	/* Channels other than GPADC do not need the current source */
 	if (address != AXP288_GP_ADC_H)
 		return 0;
 
-	ret = regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, mode);
+	ret = regmap_update_bits(info->regmap, AXP288_ADC_TS_PIN_CTRL,
+				 AXP288_ADC_TS_CURRENT_ON_OFF_MASK, mode);
 	if (ret)
 		return ret;
 
 	/* When switching to the GPADC pin give things some time to settle */
-	if (mode == AXP288_ADC_TS_PIN_GPADC)
+	if (mode == AXP288_ADC_TS_CURRENT_ON_ONDEMAND)
 		usleep_range(6000, 10000);
 
 	return 0;
@@ -145,14 +167,14 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev,
 	mutex_lock(&indio_dev->mlock);
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
-		if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_GPADC,
+		if (axp288_adc_set_ts(info, AXP288_ADC_TS_CURRENT_ON_ONDEMAND,
 					chan->address)) {
 			dev_err(&indio_dev->dev, "GPADC mode\n");
 			ret = -EINVAL;
 			break;
 		}
 		ret = axp288_adc_read_channel(val, chan->address, info->regmap);
-		if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_ON,
+		if (axp288_adc_set_ts(info, AXP288_ADC_TS_CURRENT_ON,
 						chan->address))
 			dev_err(&indio_dev->dev, "TS pin restore\n");
 		break;
@@ -164,13 +186,35 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev,
 	return ret;
 }
 
-static int axp288_adc_set_state(struct regmap *regmap)
+static int axp288_adc_initialize(struct axp288_adc_info *info)
 {
-	/* ADC should be always enabled for internal FG to function */
-	if (regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, AXP288_ADC_TS_PIN_ON))
-		return -EIO;
+	int ret, adc_enable_val;
+
+	/*
+	 * Determine if the TS pin is enabled and set the TS current-source
+	 * accordingly.
+	 */
+	ret = regmap_read(info->regmap, AXP20X_ADC_EN1, &adc_enable_val);
+	if (ret)
+		return ret;
+
+	if (adc_enable_val & AXP288_ADC_TS_ENABLE) {
+		info->ts_enabled = true;
+		ret = regmap_update_bits(info->regmap, AXP288_ADC_TS_PIN_CTRL,
+					 AXP288_ADC_TS_CURRENT_ON_OFF_MASK,
+					 AXP288_ADC_TS_CURRENT_ON);
+	} else {
+		info->ts_enabled = false;
+		ret = regmap_update_bits(info->regmap, AXP288_ADC_TS_PIN_CTRL,
+					 AXP288_ADC_TS_CURRENT_ON_OFF_MASK,
+					 AXP288_ADC_TS_CURRENT_OFF);
+	}
+	if (ret)
+		return ret;
 
-	return regmap_write(regmap, AXP20X_ADC_EN1, AXP288_ADC_EN_MASK);
+	/* Turn on the ADC for all channels except TS, leave TS as is */
+	return regmap_update_bits(info->regmap, AXP20X_ADC_EN1,
+				  AXP288_ADC_EN_MASK, AXP288_ADC_EN_MASK);
 }
 
 static const struct iio_info axp288_adc_iio_info = {
@@ -200,7 +244,7 @@ static int axp288_adc_probe(struct platform_device *pdev)
 	 * Set ADC to enabled state at all time, including system suspend.
 	 * otherwise internal fuel gauge functionality may be affected.
 	 */
-	ret = axp288_adc_set_state(axp20x->regmap);
+	ret = axp288_adc_initialize(info);
 	if (ret) {
 		dev_err(&pdev->dev, "unable to enable ADC device\n");
 		return ret;

drivers/iio/adc/ti-ads8688.c

@@ -41,6 +41,7 @@
 
 #define ADS8688_VREF_MV			4096
 #define ADS8688_REALBITS		16
+#define ADS8688_MAX_CHANNELS		8
 
 /*
  * enum ads8688_range - ADS8688 reference voltage range
@@ -385,7 +386,7 @@ static irqreturn_t ads8688_trigger_handler(int irq, void *p)
 {
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
-	u16 buffer[8];
+	u16 buffer[ADS8688_MAX_CHANNELS + sizeof(s64)/sizeof(u16)];
 	int i, j = 0;
 
 	for (i = 0; i < indio_dev->masklength; i++) {

drivers/iio/chemical/atlas-ph-sensor.c

@@ -444,9 +444,8 @@ static int atlas_read_raw(struct iio_dev *indio_dev,
 	case IIO_CHAN_INFO_SCALE:
 		switch (chan->type) {
 		case IIO_TEMP:
-			*val = 1; /* 0.01 */
-			*val2 = 100;
-			break;
+			*val = 10;
+			return IIO_VAL_INT;
 		case IIO_PH:
 			*val = 1; /* 0.001 */
 			*val2 = 1000;
@@ -477,7 +476,7 @@ static int atlas_write_raw(struct iio_dev *indio_dev,
 			   int val, int val2, long mask)
 {
 	struct atlas_data *data = iio_priv(indio_dev);
-	__be32 reg = cpu_to_be32(val);
+	__be32 reg = cpu_to_be32(val / 10);
 
 	if (val2 != 0 || val < 0 || val > 20000)
 		return -EINVAL;

tools/iio/iio_generic_buffer.c

@@ -330,7 +330,7 @@ static const struct option longopts[] = {
 
 int main(int argc, char **argv)
 {
-	unsigned long long num_loops = 2;
+	long long num_loops = 2;
 	unsigned long timedelay = 1000000;
 	unsigned long buf_len = 128;