Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
	drivers/net/vxlan.c
	drivers/vhost/net.c
	include/linux/if_vlan.h
	net/core/dev.c

The net/core/dev.c conflict was the overlap of one commit marking an
existing function static whilst another was adding a new function.

In the include/linux/if_vlan.h case, the type used for a local
variable was changed in 'net', whereas the function got rewritten
to fix a stacked vlan bug in 'net-next'.

In drivers/vhost/net.c, Al Viro's iov_iter conversions in 'net-next'
overlapped with an endainness fix for VHOST 1.0 in 'net'.

In drivers/net/vxlan.c, vxlan_find_vni() added a 'flags' parameter
in 'net-next' whereas in 'net' there was a bug fix to pass in the
correct network namespace pointer in calls to this function.

Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/i2c/i2c-st.txt

@@ -31,7 +31,7 @@ i2c0: i2c@fed40000 {
 	compatible	= "st,comms-ssc4-i2c";
 	reg		= <0xfed40000 0x110>;
 	interrupts	=  <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
-	clocks		= <&CLK_S_ICN_REG_0>;
+	clocks		= <&clk_s_a0_ls CLK_ICN_REG>;
 	clock-names	= "ssc";
 	clock-frequency = <400000>;
 	pinctrl-names	= "default";

Documentation/devicetree/bindings/i2c/trivial-devices.txt

@@ -47,6 +47,7 @@ dallas,ds3232		Extremely Accurate I²C RTC with Integrated Crystal and SRAM
 dallas,ds4510		CPU Supervisor with Nonvolatile Memory and Programmable I/O
 dallas,ds75		Digital Thermometer and Thermostat
 dlg,da9053		DA9053: flexible system level PMIC with multicore support
+dlg,da9063		DA9063: system PMIC for quad-core application processors
 epson,rx8025		High-Stability. I2C-Bus INTERFACE REAL TIME CLOCK MODULE
 epson,rx8581		I2C-BUS INTERFACE REAL TIME CLOCK MODULE
 fsl,mag3110		MAG3110: Xtrinsic High Accuracy, 3D Magnetometer

Documentation/networking/netlink_mmap.txt

@@ -199,16 +199,9 @@ frame header.
 TX limitations
 --------------
 
-Kernel processing usually involves validation of the message received by
-user-space, then processing its contents. The kernel must assure that
-userspace is not able to modify the message contents after they have been
-validated. In order to do so, the message is copied from the ring frame
-to an allocated buffer if either of these conditions is false:
-
-- only a single mapping of the ring exists
-- the file descriptor is not shared between processes
-
-This means that for threaded programs, the kernel will fall back to copying.
+As of Jan 2015 the message is always copied from the ring frame to an
+allocated buffer due to unresolved security concerns.
+See commit 4682a0358639b29cf ("netlink: Always copy on mmap TX.").
 
 Example
 -------

MAINTAINERS

@@ -708,6 +708,16 @@ X:	drivers/iio/*/adjd*
 F:	drivers/staging/iio/*/ad*
 F:	staging/iio/trigger/iio-trig-bfin-timer.c
 
+ANDROID DRIVERS
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+M:	Arve Hj�nnev�g <arve@android.com>
+M:	Riley Andrews <riandrews@android.com>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/gregkh/staging.git
+L:	devel@driverdev.osuosl.org
+S:	Supported
+F:	drivers/android/
+F:	drivers/staging/android/
+
 AOA (Apple Onboard Audio) ALSA DRIVER
 M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linuxppc-dev@lists.ozlabs.org
@@ -10181,6 +10191,7 @@ USERSPACE I/O (UIO)
 M:	"Hans J. Koch" <hjk@hansjkoch.de>
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
 F:	Documentation/DocBook/uio-howto.tmpl
 F:	drivers/uio/
 F:	include/linux/uio*.h

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 19
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Diseased Newt
 
 # *DOCUMENTATION*

arch/alpha/mm/fault.c

@@ -156,6 +156,8 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
+		else if (fault & VM_FAULT_SIGSEGV)
+			goto bad_area;
 		else if (fault & VM_FAULT_SIGBUS)
 			goto do_sigbus;
 		BUG();

arch/arc/mm/fault.c

@@ -161,6 +161,8 @@ void do_page_fault(unsigned long address, struct pt_regs *regs)
 
 	if (fault & VM_FAULT_OOM)
 		goto out_of_memory;
+	else if (fault & VM_FAULT_SIGSEGV)
+		goto bad_area;
 	else if (fault & VM_FAULT_SIGBUS)
 		goto do_sigbus;
 

arch/arm/boot/compressed/head.S

@@ -263,16 +263,37 @@ restart:	adr	r0, LC0
 		 * OK... Let's do some funky business here.
 		 * If we do have a DTB appended to zImage, and we do have
 		 * an ATAG list around, we want the later to be translated
-		 * and folded into the former here.  To be on the safe side,
-		 * let's temporarily move  the stack away into the malloc
-		 * area.  No GOT fixup has occurred yet, but none of the
-		 * code we're about to call uses any global variable.
+		 * and folded into the former here. No GOT fixup has occurred
+		 * yet, but none of the code we're about to call uses any
+		 * global variable.
 		*/
-		add	sp, sp, #0x10000
+
+		/* Get the initial DTB size */
+		ldr	r5, [r6, #4]
+#ifndef __ARMEB__
+		/* convert to little endian */
+		eor	r1, r5, r5, ror #16
+		bic	r1, r1, #0x00ff0000
+		mov	r5, r5, ror #8
+		eor	r5, r5, r1, lsr #8
+#endif
+		/* 50% DTB growth should be good enough */
+		add	r5, r5, r5, lsr #1
+		/* preserve 64-bit alignment */
+		add	r5, r5, #7
+		bic	r5, r5, #7
+		/* clamp to 32KB min and 1MB max */
+		cmp	r5, #(1 << 15)
+		movlo	r5, #(1 << 15)
+		cmp	r5, #(1 << 20)
+		movhi	r5, #(1 << 20)
+		/* temporarily relocate the stack past the DTB work space */
+		add	sp, sp, r5
+
 		stmfd	sp!, {r0-r3, ip, lr}
 		mov	r0, r8
 		mov	r1, r6
-		sub	r2, sp, r6
+		mov	r2, r5
 		bl	atags_to_fdt
 
 		/*
@@ -285,11 +306,11 @@ restart:	adr	r0, LC0
 		bic	r0, r0, #1
 		add	r0, r0, #0x100
 		mov	r1, r6
-		sub	r2, sp, r6
+		mov	r2, r5
 		bleq	atags_to_fdt
 
 		ldmfd	sp!, {r0-r3, ip, lr}
-		sub	sp, sp, #0x10000
+		sub	sp, sp, r5
 #endif
 
 		mov	r8, r6			@ use the appended device tree
@@ -306,7 +327,7 @@ restart:	adr	r0, LC0
 		subs	r1, r5, r1
 		addhi	r9, r9, r1
 
-		/* Get the dtb's size */
+		/* Get the current DTB size */
 		ldr	r5, [r6, #4]
 #ifndef __ARMEB__
 		/* convert r5 (dtb size) to little endian */

arch/arm/boot/dts/sun4i-a10.dtsi

@@ -17,14 +17,6 @@
 
 	aliases {
 		ethernet0 = &emac;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
-		serial6 = &uart6;
-		serial7 = &uart7;
 	};
 
 	chosen {
@@ -39,6 +31,14 @@
 				 <&ahb_gates 44>;
 			status = "disabled";
 		};
+
+		framebuffer@1 {
+			compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+			allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
+			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
+				 <&ahb_gates 44>, <&ahb_gates 46>;
+			status = "disabled";
+		};
 	};
 
 	cpus {
@@ -438,8 +438,8 @@
 			reg-names = "phy_ctrl", "pmu1", "pmu2";
 			clocks = <&usb_clk 8>;
 			clock-names = "usb_phy";
-			resets = <&usb_clk 1>, <&usb_clk 2>;
-			reset-names = "usb1_reset", "usb2_reset";
+			resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
+			reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
 			status = "disabled";
 		};
 

arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts

@@ -55,6 +55,12 @@
 	model = "Olimex A10s-Olinuxino Micro";
 	compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s";
 
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart2;
+		serial2 = &uart3;
+	};
+
 	soc@01c00000 {
 		emac: ethernet@01c0b000 {
 			pinctrl-names = "default";

arch/arm/boot/dts/sun5i-a10s.dtsi

@@ -18,10 +18,6 @@
 
 	aliases {
 		ethernet0 = &emac;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
 	};
 
 	chosen {
@@ -390,8 +386,8 @@
 			reg-names = "phy_ctrl", "pmu1";
 			clocks = <&usb_clk 8>;
 			clock-names = "usb_phy";
-			resets = <&usb_clk 1>;
-			reset-names = "usb1_reset";
+			resets = <&usb_clk 0>, <&usb_clk 1>;
+			reset-names = "usb0_reset", "usb1_reset";
 			status = "disabled";
 		};
 

arch/arm/boot/dts/sun5i-a13-hsg-h702.dts

@@ -53,6 +53,10 @@
 	model = "HSG H702";
 	compatible = "hsg,h702", "allwinner,sun5i-a13";
 
+	aliases {
+		serial0 = &uart1;
+	};
+
 	soc@01c00000 {
 		mmc0: mmc@01c0f000 {
 			pinctrl-names = "default";

arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts

@@ -54,6 +54,10 @@
 	model = "Olimex A13-Olinuxino Micro";
 	compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13";
 
+	aliases {
+		serial0 = &uart1;
+	};
+
 	soc@01c00000 {
 		mmc0: mmc@01c0f000 {
 			pinctrl-names = "default";

arch/arm/boot/dts/sun5i-a13-olinuxino.dts

@@ -55,6 +55,10 @@
 	model = "Olimex A13-Olinuxino";
 	compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13";
 
+	aliases {
+		serial0 = &uart1;
+	};
+
 	soc@01c00000 {
 		mmc0: mmc@01c0f000 {
 			pinctrl-names = "default";

arch/arm/boot/dts/sun5i-a13.dtsi

@@ -16,11 +16,6 @@
 / {
 	interrupt-parent = <&intc>;
 
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart3;
-	};
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -349,8 +344,8 @@
 			reg-names = "phy_ctrl", "pmu1";
 			clocks = <&usb_clk 8>;
 			clock-names = "usb_phy";
-			resets = <&usb_clk 1>;
-			reset-names = "usb1_reset";
+			resets = <&usb_clk 0>, <&usb_clk 1>;
+			reset-names = "usb0_reset", "usb1_reset";
 			status = "disabled";
 		};
 

arch/arm/boot/dts/sun6i-a31.dtsi

@@ -53,12 +53,6 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
 		ethernet0 = &gmac;
 	};
 

arch/arm/boot/dts/sun7i-a20-bananapi.dts

@@ -55,6 +55,12 @@
 	model = "LeMaker Banana Pi";
 	compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
 
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart3;
+		serial2 = &uart7;
+	};
+
 	soc@01c00000 {
 		spi0: spi@01c05000 {
 			pinctrl-names = "default";

arch/arm/boot/dts/sun7i-a20-hummingbird.dts

@@ -19,6 +19,14 @@
 	model = "Merrii A20 Hummingbird";
 	compatible = "merrii,a20-hummingbird", "allwinner,sun7i-a20";
 
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+	};
+
 	soc@01c00000 {
 		mmc0: mmc@01c0f000 {
 			pinctrl-names = "default";

arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts

@@ -20,6 +20,9 @@
 	compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20";
 
 	aliases {
+		serial0 = &uart0;
+		serial1 = &uart6;
+		serial2 = &uart7;
 		spi0 = &spi1;
 		spi1 = &spi2;
 	};

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -54,14 +54,6 @@
 
 	aliases {
 		ethernet0 = &gmac;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
-		serial6 = &uart6;
-		serial7 = &uart7;
 	};
 
 	chosen {

arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts

@@ -55,6 +55,10 @@
 	model = "Ippo Q8H Dual Core Tablet (v5)";
 	compatible = "ippo,q8h-v5", "allwinner,sun8i-a23";
 
+	aliases {
+		serial0 = &r_uart;
+	};
+
 	chosen {
 		bootargs = "earlyprintk console=ttyS0,115200";
 	};

arch/arm/boot/dts/sun8i-a23.dtsi

@@ -52,15 +52,6 @@
 / {
 	interrupt-parent = <&gic>;
 
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &r_uart;
-	};
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/arm/boot/dts/sun9i-a80-optimus.dts

@@ -54,6 +54,11 @@
 	model = "Merrii A80 Optimus Board";
 	compatible = "merrii,a80-optimus", "allwinner,sun9i-a80";
 
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart4;
+	};
+
 	chosen {
 		bootargs = "earlyprintk console=ttyS0,115200";
 	};