Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/gi…

…t/linville/wireless-next into for-davem

drivers/bluetooth/ath3k.c

@@ -90,6 +90,7 @@ static struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3393) },
 	{ USB_DEVICE(0x0489, 0xe04e) },
 	{ USB_DEVICE(0x0489, 0xe056) },
+	{ USB_DEVICE(0x0489, 0xe04d) },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE02C) },
@@ -126,6 +127,7 @@ static struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU22 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },

drivers/bluetooth/btusb.c

@@ -148,6 +148,7 @@ static struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
@@ -926,6 +927,22 @@ static void btusb_waker(struct work_struct *work)
 	usb_autopm_put_interface(data->intf);
 }
 
+static int btusb_setup_bcm92035(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	u8 val = 0x00;
+
+	BT_DBG("%s", hdev->name);
+
+	skb = __hci_cmd_sync(hdev, 0xfc3b, 1, &val, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb))
+		BT_ERR("BCM92035 command failed (%ld)", -PTR_ERR(skb));
+	else
+		kfree_skb(skb);
+
+	return 0;
+}
+
 static int btusb_probe(struct usb_interface *intf,
 				const struct usb_device_id *id)
 {
@@ -1022,11 +1039,14 @@ static int btusb_probe(struct usb_interface *intf,
 
 	SET_HCIDEV_DEV(hdev, &intf->dev);
 
-	hdev->open     = btusb_open;
-	hdev->close    = btusb_close;
-	hdev->flush    = btusb_flush;
-	hdev->send     = btusb_send_frame;
-	hdev->notify   = btusb_notify;
+	hdev->open   = btusb_open;
+	hdev->close  = btusb_close;
+	hdev->flush  = btusb_flush;
+	hdev->send   = btusb_send_frame;
+	hdev->notify = btusb_notify;
+
+	if (id->driver_info & BTUSB_BCM92035)
+		hdev->setup = btusb_setup_bcm92035;
 
 	/* Interface numbers are hardcoded in the specification */
 	data->isoc = usb_ifnum_to_if(data->udev, 1);
@@ -1065,17 +1085,6 @@ static int btusb_probe(struct usb_interface *intf,
 		data->isoc = NULL;
 	}
 
-	if (id->driver_info & BTUSB_BCM92035) {
-		unsigned char cmd[] = { 0x3b, 0xfc, 0x01, 0x00 };
-		struct sk_buff *skb;
-
-		skb = bt_skb_alloc(sizeof(cmd), GFP_KERNEL);
-		if (skb) {
-			memcpy(skb_put(skb, sizeof(cmd)), cmd, sizeof(cmd));
-			skb_queue_tail(&hdev->driver_init, skb);
-		}
-	}
-
 	if (data->isoc) {
 		err = usb_driver_claim_interface(&btusb_driver,
 							data->isoc, data);

drivers/bluetooth/hci_h4.c

@@ -153,6 +153,9 @@ static int h4_recv(struct hci_uart *hu, void *data, int count)
 {
 	int ret;
 
+	if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
+		return -EUNATCH;
+
 	ret = hci_recv_stream_fragment(hu->hdev, data, count);
 	if (ret < 0) {
 		BT_ERR("Frame Reassembly Failed");

drivers/bluetooth/hci_ldisc.c

@@ -260,12 +260,12 @@ static int hci_uart_send_frame(struct sk_buff *skb)
 
 /* ------ LDISC part ------ */
 /* hci_uart_tty_open
- * 
+ *
  *     Called when line discipline changed to HCI_UART.
  *
  * Arguments:
  *     tty    pointer to tty info structure
- * Return Value:    
+ * Return Value:
  *     0 if success, otherwise error code
  */
 static int hci_uart_tty_open(struct tty_struct *tty)
@@ -365,15 +365,15 @@ static void hci_uart_tty_wakeup(struct tty_struct *tty)
 }
 
 /* hci_uart_tty_receive()
- * 
+ *
  *     Called by tty low level driver when receive data is
  *     available.
- *     
+ *
  * Arguments:  tty          pointer to tty isntance data
  *             data         pointer to received data
  *             flags        pointer to flags for data
  *             count        count of received data in bytes
- *     
+ *
  * Return Value:    None
  */
 static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data, char *flags, int count)
@@ -388,7 +388,10 @@ static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data, char *f
 
 	spin_lock(&hu->rx_lock);
 	hu->proto->recv(hu, (void *) data, count);
-	hu->hdev->stat.byte_rx += count;
+
+	if (hu->hdev)
+		hu->hdev->stat.byte_rx += count;
+
 	spin_unlock(&hu->rx_lock);
 
 	tty_unthrottle(tty);

drivers/net/wireless/adm8211.c

@@ -1293,7 +1293,8 @@ static int adm8211_config(struct ieee80211_hw *dev, u32 changed)
 {
 	struct adm8211_priv *priv = dev->priv;
 	struct ieee80211_conf *conf = &dev->conf;
-	int channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
+	int channel =
+		ieee80211_frequency_to_channel(conf->chandef.chan->center_freq);
 
 	if (channel != priv->channel) {
 		priv->channel = channel;

drivers/net/wireless/at76c50x-usb.c

@@ -1943,12 +1943,12 @@ static int at76_config(struct ieee80211_hw *hw, u32 changed)
 	struct at76_priv *priv = hw->priv;
 
 	at76_dbg(DBG_MAC80211, "%s(): channel %d",
-		 __func__, hw->conf.channel->hw_value);
+		 __func__, hw->conf.chandef.chan->hw_value);
 	at76_dbg_dump(DBG_MAC80211, priv->bssid, ETH_ALEN, "bssid:");
 
 	mutex_lock(&priv->mtx);
 
-	priv->channel = hw->conf.channel->hw_value;
+	priv->channel = hw->conf.chandef.chan->hw_value;
 
 	if (is_valid_ether_addr(priv->bssid))
 		at76_join(priv);

drivers/net/wireless/ath/ar5523/ar5523.c

@@ -457,14 +457,14 @@ static int ar5523_set_chan(struct ar5523 *ar)
 	memset(&reset, 0, sizeof(reset));
 	reset.flags |= cpu_to_be32(UATH_CHAN_2GHZ);
 	reset.flags |= cpu_to_be32(UATH_CHAN_OFDM);
-	reset.freq = cpu_to_be32(conf->channel->center_freq);
+	reset.freq = cpu_to_be32(conf->chandef.chan->center_freq);
 	reset.maxrdpower = cpu_to_be32(50);	/* XXX */
 	reset.channelchange = cpu_to_be32(1);
 	reset.keeprccontent = cpu_to_be32(0);
 
 	ar5523_dbg(ar, "set chan flags 0x%x freq %d\n",
 		   be32_to_cpu(reset.flags),
-		   conf->channel->center_freq);
+		   conf->chandef.chan->center_freq);
 	return ar5523_cmd_write(ar, WDCMSG_RESET, &reset, sizeof(reset), 0);
 }
 
@@ -594,7 +594,7 @@ static void ar5523_data_rx_cb(struct urb *urb)
 	rx_status = IEEE80211_SKB_RXCB(data->skb);
 	memset(rx_status, 0, sizeof(*rx_status));
 	rx_status->freq = be32_to_cpu(desc->channel);
-	rx_status->band = hw->conf.channel->band;
+	rx_status->band = hw->conf.chandef.chan->band;
 	rx_status->signal = -95 + be32_to_cpu(desc->rssi);
 
 	ieee80211_rx_irqsafe(hw, data->skb);
@@ -1153,13 +1153,13 @@ static int ar5523_get_wlan_mode(struct ar5523 *ar,
 	struct ieee80211_sta *sta;
 	u32 sta_rate_set;
 
-	band = ar->hw->wiphy->bands[ar->hw->conf.channel->band];
+	band = ar->hw->wiphy->bands[ar->hw->conf.chandef.chan->band];
 	sta = ieee80211_find_sta(ar->vif, bss_conf->bssid);
 	if (!sta) {
 		ar5523_info(ar, "STA not found!\n");
 		return WLAN_MODE_11b;
 	}
-	sta_rate_set = sta->supp_rates[ar->hw->conf.channel->band];
+	sta_rate_set = sta->supp_rates[ar->hw->conf.chandef.chan->band];
 
 	for (bit = 0; bit < band->n_bitrates; bit++) {
 		if (sta_rate_set & 1) {
@@ -1197,11 +1197,11 @@ static void ar5523_create_rateset(struct ar5523 *ar,
 		ar5523_info(ar, "STA not found. Cannot set rates\n");
 		sta_rate_set = bss_conf->basic_rates;
 	} else
-		sta_rate_set = sta->supp_rates[ar->hw->conf.channel->band];
+		sta_rate_set = sta->supp_rates[ar->hw->conf.chandef.chan->band];
 
 	ar5523_dbg(ar, "sta rate_set = %08x\n", sta_rate_set);
 
-	band = ar->hw->wiphy->bands[ar->hw->conf.channel->band];
+	band = ar->hw->wiphy->bands[ar->hw->conf.chandef.chan->band];
 	for (bit = 0; bit < band->n_bitrates; bit++) {
 		BUG_ON(i >= AR5523_MAX_NRATES);
 		ar5523_dbg(ar, "Considering rate %d : %d\n",

drivers/net/wireless/ath/ath5k/Makefile

@@ -10,6 +10,7 @@ ath5k-y				+= phy.o
 ath5k-y				+= reset.o
 ath5k-y				+= attach.o
 ath5k-y				+= base.o
+CFLAGS_base.o			+= -I$(src)
 ath5k-y				+= led.o
 ath5k-y				+= rfkill.o
 ath5k-y				+= ani.o

drivers/net/wireless/ath/ath5k/base.c

@@ -2639,7 +2639,7 @@ int ath5k_start(struct ieee80211_hw *hw)
 	 * be followed by initialization of the appropriate bits
 	 * and then setup of the interrupt mask.
 	 */
-	ah->curchan = ah->hw->conf.channel;
+	ah->curchan = ah->hw->conf.chandef.chan;
 	ah->imask = AR5K_INT_RXOK
 		| AR5K_INT_RXERR
 		| AR5K_INT_RXEOL

drivers/net/wireless/ath/ath5k/mac80211-ops.c

@@ -202,7 +202,7 @@ ath5k_config(struct ieee80211_hw *hw, u32 changed)
 	mutex_lock(&ah->lock);
 
 	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
-		ret = ath5k_chan_set(ah, conf->channel);
+		ret = ath5k_chan_set(ah, conf->chandef.chan);
 		if (ret < 0)
 			goto unlock;
 	}
@@ -678,7 +678,7 @@ ath5k_get_survey(struct ieee80211_hw *hw, int idx, struct survey_info *survey)
 
 	memcpy(survey, &ah->survey, sizeof(*survey));
 
-	survey->channel = conf->channel;
+	survey->channel = conf->chandef.chan;
 	survey->noise = ah->ah_noise_floor;
 	survey->filled = SURVEY_INFO_NOISE_DBM |
 			SURVEY_INFO_CHANNEL_TIME |

drivers/net/wireless/ath/ath5k/trace.h

@@ -97,7 +97,7 @@ TRACE_EVENT(ath5k_tx_complete,
 #if defined(CONFIG_ATH5K_TRACER) && !defined(__CHECKER__)
 
 #undef TRACE_INCLUDE_PATH
-#define TRACE_INCLUDE_PATH ../../drivers/net/wireless/ath/ath5k
+#define TRACE_INCLUDE_PATH .
 #undef TRACE_INCLUDE_FILE
 #define TRACE_INCLUDE_FILE trace