ALSA: emu10k1: Use standard printk helpers

Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

sound/pci/emu10k1/emu10k1.c

@@ -170,7 +170,8 @@ static int snd_card_emu10k1_probe(struct pci_dev *pci,
 	if (snd_seq_device_new(card, 1, SNDRV_SEQ_DEV_ID_EMU10K1_SYNTH,
 			       sizeof(struct snd_emu10k1_synth_arg), &wave) < 0 ||
 	    wave == NULL) {
-		snd_printk(KERN_WARNING "can't initialize Emu10k1 wavetable synth\n");
+		dev_warn(emu->card->dev,
+			 "can't initialize Emu10k1 wavetable synth\n");
 	} else {
 		struct snd_emu10k1_synth_arg *arg;
 		arg = SNDRV_SEQ_DEVICE_ARGPTR(wave);
@@ -247,8 +248,7 @@ static int snd_emu10k1_resume(struct device *dev)
 	pci_set_power_state(pci, PCI_D0);
 	pci_restore_state(pci);
 	if (pci_enable_device(pci) < 0) {
-		printk(KERN_ERR "emu10k1: pci_enable_device failed, "
-		       "disabling device\n");
+		dev_err(dev, "pci_enable_device failed, disabling device\n");
 		snd_card_disconnect(card);
 		return -EIO;
 	}

sound/pci/emu10k1/emu10k1_callback.c

@@ -105,7 +105,7 @@ snd_emu10k1_synth_get_voice(struct snd_emu10k1 *hw)
 			vp = &emu->voices[best[i].voice];
 			if ((ch = vp->ch) < 0) {
 				/*
-				printk(KERN_WARNING
+				dev_warn(emu->card->dev,
 				       "synth_get_voice: ch < 0 (%d) ??", i);
 				*/
 				continue;
@@ -339,7 +339,7 @@ start_voice(struct snd_emux_voice *vp)
 		return -EINVAL;
 	emem->map_locked++;
 	if (snd_emu10k1_memblk_map(hw, emem) < 0) {
-		/* printk(KERN_ERR "emu: cannot map!\n"); */
+		/* dev_err(hw->card->devK, "emu: cannot map!\n"); */
 		return -ENOMEM;
 	}
 	mapped_offset = snd_emu10k1_memblk_offset(emem) >> 1;

sound/pci/emu10k1/emu10k1_main.c

@@ -217,7 +217,7 @@ static int snd_emu10k1_init(struct snd_emu10k1 *emu, int enable_ir, int resume)
 	}
 	if (emu->card_capabilities->ca0108_chip) { /* audigy2 Value */
 		/* Hacks for Alice3 to work independent of haP16V driver */
-		snd_printk(KERN_INFO "Audigy2 value: Special config.\n");
+		dev_info(emu->card->dev, "Audigy2 value: Special config.\n");
 		/* Setup SRCMulti_I2S SamplingRate */
 		tmp = snd_emu10k1_ptr_read(emu, A_SPDIF_SAMPLERATE, 0);
 		tmp &= 0xfffff1ff;
@@ -723,7 +723,8 @@ static int emu1010_firmware_thread(void *data)
 		if (reg & EMU_HANA_OPTION_DOCK_OFFLINE) {
 			/* Audio Dock attached */
 			/* Return to Audio Dock programming mode */
-			snd_printk(KERN_INFO "emu1010: Loading Audio Dock Firmware\n");
+			dev_info(emu->card->dev,
+				 "emu1010: Loading Audio Dock Firmware\n");
 			snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, EMU_HANA_FPGA_CONFIG_AUDIODOCK);
 
 			if (!emu->dock_fw) {
@@ -756,19 +757,25 @@ static int emu1010_firmware_thread(void *data)
 
 			snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, 0);
 			snd_emu1010_fpga_read(emu, EMU_HANA_IRQ_STATUS, &reg);
-			snd_printk(KERN_INFO "emu1010: EMU_HANA+DOCK_IRQ_STATUS = 0x%x\n", reg);
+			dev_info(emu->card->dev,
+				 "emu1010: EMU_HANA+DOCK_IRQ_STATUS = 0x%x\n",
+				 reg);
 			/* ID, should read & 0x7f = 0x55 when FPGA programmed. */
 			snd_emu1010_fpga_read(emu, EMU_HANA_ID, &reg);
-			snd_printk(KERN_INFO "emu1010: EMU_HANA+DOCK_ID = 0x%x\n", reg);
+			dev_info(emu->card->dev,
+				 "emu1010: EMU_HANA+DOCK_ID = 0x%x\n", reg);
 			if ((reg & 0x1f) != 0x15) {
 				/* FPGA failed to be programmed */
-				snd_printk(KERN_INFO "emu1010: Loading Audio Dock Firmware file failed, reg = 0x%x\n", reg);
+				dev_info(emu->card->dev,
+					 "emu1010: Loading Audio Dock Firmware file failed, reg = 0x%x\n",
+					 reg);
 				continue;
 			}
-			snd_printk(KERN_INFO "emu1010: Audio Dock Firmware loaded\n");
+			dev_info(emu->card->dev,
+				 "emu1010: Audio Dock Firmware loaded\n");
 			snd_emu1010_fpga_read(emu, EMU_DOCK_MAJOR_REV, &tmp);
 			snd_emu1010_fpga_read(emu, EMU_DOCK_MINOR_REV, &tmp2);
-			snd_printk(KERN_INFO "Audio Dock ver: %u.%u\n",
+			dev_info(emu->card->dev, "Audio Dock ver: %u.%u\n",
 				   tmp, tmp2);
 			/* Sync clocking between 1010 and Dock */
 			/* Allow DLL to settle */
@@ -777,7 +784,7 @@ static int emu1010_firmware_thread(void *data)
 			snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, EMU_UNMUTE);
 		}
 	}
-	snd_printk(KERN_INFO "emu1010: firmware thread stopping\n");
+	dev_info(emu->card->dev, "emu1010: firmware thread stopping\n");
 	return 0;
 }
 
@@ -818,7 +825,7 @@ static int snd_emu10k1_emu1010_init(struct snd_emu10k1 *emu)
 	u32 tmp, tmp2, reg;
 	int err;
 
-	snd_printk(KERN_INFO "emu1010: Special config.\n");
+	dev_info(emu->card->dev, "emu1010: Special config.\n");
 	/* AC97 2.1, Any 16Meg of 4Gig address, Auto-Mute, EMU32 Slave,
 	 * Lock Sound Memory Cache, Lock Tank Memory Cache,
 	 * Mute all codecs.
@@ -843,21 +850,22 @@ static int snd_emu10k1_emu1010_init(struct snd_emu10k1 *emu)
 
 	/* ID, should read & 0x7f = 0x55. (Bit 7 is the IRQ bit) */
 	snd_emu1010_fpga_read(emu, EMU_HANA_ID, &reg);
-	snd_printdd("reg1 = 0x%x\n", reg);
+	dev_dbg(emu->card->dev, "reg1 = 0x%x\n", reg);
 	if ((reg & 0x3f) == 0x15) {
 		/* FPGA netlist already present so clear it */
 		/* Return to programming mode */
 
 		snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, 0x02);
 	}
 	snd_emu1010_fpga_read(emu, EMU_HANA_ID, &reg);
-	snd_printdd("reg2 = 0x%x\n", reg);
+	dev_dbg(emu->card->dev, "reg2 = 0x%x\n", reg);
 	if ((reg & 0x3f) == 0x15) {
 		/* FPGA failed to return to programming mode */
-		snd_printk(KERN_INFO "emu1010: FPGA failed to return to programming mode\n");
+		dev_info(emu->card->dev,
+			 "emu1010: FPGA failed to return to programming mode\n");
 		return -ENODEV;
 	}
-	snd_printk(KERN_INFO "emu1010: EMU_HANA_ID = 0x%x\n", reg);
+	dev_info(emu->card->dev, "emu1010: EMU_HANA_ID = 0x%x\n", reg);
 
 	if (!emu->firmware) {
 		const char *filename;
@@ -880,38 +888,43 @@ static int snd_emu10k1_emu1010_init(struct snd_emu10k1 *emu)
 
 		err = request_firmware(&emu->firmware, filename, &emu->pci->dev);
 		if (err != 0) {
-			snd_printk(KERN_ERR "emu1010: firmware: %s not found. Err = %d\n", filename, err);
+			dev_info(emu->card->dev,
+				 "emu1010: firmware: %s not found. Err = %d\n",
+				 filename, err);
 			return err;
 		}
-		snd_printk(KERN_INFO "emu1010: firmware file = %s, size = 0x%zx\n",
+		dev_info(emu->card->dev,
+			 "emu1010: firmware file = %s, size = 0x%zx\n",
 			   filename, emu->firmware->size);
 	}
 
 	err = snd_emu1010_load_firmware(emu, emu->firmware);
 	if (err != 0) {
-		snd_printk(KERN_INFO "emu1010: Loading Firmware failed\n");
+		dev_info(emu->card->dev, "emu1010: Loading Firmware failed\n");
 		return err;
 	}
 
 	/* ID, should read & 0x7f = 0x55 when FPGA programmed. */
 	snd_emu1010_fpga_read(emu, EMU_HANA_ID, &reg);
 	if ((reg & 0x3f) != 0x15) {
 		/* FPGA failed to be programmed */
-		snd_printk(KERN_INFO "emu1010: Loading Hana Firmware file failed, reg = 0x%x\n", reg);
+		dev_info(emu->card->dev,
+			 "emu1010: Loading Hana Firmware file failed, reg = 0x%x\n",
+			 reg);
 		return -ENODEV;
 	}
 
-	snd_printk(KERN_INFO "emu1010: Hana Firmware loaded\n");
+	dev_info(emu->card->dev, "emu1010: Hana Firmware loaded\n");
 	snd_emu1010_fpga_read(emu, EMU_HANA_MAJOR_REV, &tmp);
 	snd_emu1010_fpga_read(emu, EMU_HANA_MINOR_REV, &tmp2);
-	snd_printk(KERN_INFO "emu1010: Hana version: %u.%u\n", tmp, tmp2);
+	dev_info(emu->card->dev, "emu1010: Hana version: %u.%u\n", tmp, tmp2);
 	/* Enable 48Volt power to Audio Dock */
 	snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_PWR, EMU_HANA_DOCK_PWR_ON);
 
 	snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, &reg);
-	snd_printk(KERN_INFO "emu1010: Card options = 0x%x\n", reg);
+	dev_info(emu->card->dev, "emu1010: Card options = 0x%x\n", reg);
 	snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, &reg);
-	snd_printk(KERN_INFO "emu1010: Card options = 0x%x\n", reg);
+	dev_info(emu->card->dev, "emu1010: Card options = 0x%x\n", reg);
 	snd_emu1010_fpga_read(emu, EMU_HANA_OPTICAL_TYPE, &tmp);
 	/* Optical -> ADAT I/O  */
 	/* 0 : SPDIF
@@ -950,7 +963,7 @@ static int snd_emu10k1_emu1010_init(struct snd_emu10k1 *emu)
 	snd_emu1010_fpga_write(emu, EMU_HANA_IRQ_ENABLE, 0x00);
 
 	snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, &reg);
-	snd_printk(KERN_INFO "emu1010: Card options3 = 0x%x\n", reg);
+	dev_info(emu->card->dev, "emu1010: Card options3 = 0x%x\n", reg);
 	/* Default WCLK set to 48kHz. */
 	snd_emu1010_fpga_write(emu, EMU_HANA_DEFCLOCK, 0x00);
 	/* Word Clock source, Internal 48kHz x1 */
@@ -1808,7 +1821,9 @@ int snd_emu10k1_create(struct snd_card *card,
 	emu->revision = pci->revision;
 	pci_read_config_dword(pci, PCI_SUBSYSTEM_VENDOR_ID, &emu->serial);
 	pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &emu->model);
-	snd_printdd("vendor = 0x%x, device = 0x%x, subsystem_vendor_id = 0x%x, subsystem_id = 0x%x\n", pci->vendor, pci->device, emu->serial, emu->model);
+	dev_dbg(card->dev,
+		"vendor = 0x%x, device = 0x%x, subsystem_vendor_id = 0x%x, subsystem_id = 0x%x\n",
+		pci->vendor, pci->device, emu->serial, emu->model);
 
 	for (c = emu_chip_details; c->vendor; c++) {
 		if (c->vendor == pci->vendor && c->device == pci->device) {
@@ -1827,21 +1842,21 @@ int snd_emu10k1_create(struct snd_card *card,
 		}
 	}
 	if (c->vendor == 0) {
-		snd_printk(KERN_ERR "emu10k1: Card not recognised\n");
+		dev_err(card->dev, "emu10k1: Card not recognised\n");
 		kfree(emu);
 		pci_disable_device(pci);
 		return -ENOENT;
 	}
 	emu->card_capabilities = c;
 	if (c->subsystem && !subsystem)
-		snd_printdd("Sound card name = %s\n", c->name);
+		dev_dbg(card->dev, "Sound card name = %s\n", c->name);
 	else if (subsystem)
-		snd_printdd("Sound card name = %s, "
+		dev_dbg(card->dev, "Sound card name = %s, "
 			"vendor = 0x%x, device = 0x%x, subsystem = 0x%x. "
 			"Forced to subsystem = 0x%x\n",	c->name,
 			pci->vendor, pci->device, emu->serial, c->subsystem);
 	else
-		snd_printdd("Sound card name = %s, "
+		dev_dbg(card->dev, "Sound card name = %s, "
 			"vendor = 0x%x, device = 0x%x, subsystem = 0x%x.\n",
 			c->name, pci->vendor, pci->device,
 			emu->serial);
@@ -1869,7 +1884,9 @@ int snd_emu10k1_create(struct snd_card *card,
 	emu->dma_mask = is_audigy ? AUDIGY_DMA_MASK : EMU10K1_DMA_MASK;
 	if (pci_set_dma_mask(pci, emu->dma_mask) < 0 ||
 	    pci_set_consistent_dma_mask(pci, emu->dma_mask) < 0) {
-		snd_printk(KERN_ERR "architecture does not support PCI busmaster DMA with mask 0x%lx\n", emu->dma_mask);
+		dev_err(card->dev,
+			"architecture does not support PCI busmaster DMA with mask 0x%lx\n",
+			emu->dma_mask);
 		kfree(emu);
 		pci_disable_device(pci);
 		return -ENXIO;

sound/pci/emu10k1/emu10k1_patch.c

@@ -50,7 +50,8 @@ snd_emu10k1_sample_new(struct snd_emux *rec, struct snd_sf_sample *sp,
 		return -EINVAL;
 
 	if (sp->v.size == 0) {
-		snd_printd("emu: rom font for sample %d\n", sp->v.sample);
+		dev_dbg(emu->card->dev,
+			"emu: rom font for sample %d\n", sp->v.sample);
 		return 0;
 	}
 
@@ -92,7 +93,8 @@ snd_emu10k1_sample_new(struct snd_emux *rec, struct snd_sf_sample *sp,
 		blocksize *= 2;
 	sp->block = snd_emu10k1_synth_alloc(emu, blocksize);
 	if (sp->block == NULL) {
-		snd_printd("emu10k1: synth malloc failed (size=%d)\n", blocksize);
+		dev_dbg(emu->card->dev,
+			"synth malloc failed (size=%d)\n", blocksize);
 		/* not ENOMEM (for compatibility with OSS) */
 		return -ENOSPC;
 	}

sound/pci/emu10k1/emufx.c

@@ -1547,7 +1547,7 @@ A_OP(icode, &ptr, iMAC0, A_GPR(var), A_GPR(var), A_GPR(vol), A_EXTIN(input))
 	/* A_PUT_STEREO_OUTPUT(A_EXTOUT_FRONT_L, A_EXTOUT_FRONT_R, playback + SND_EMU10K1_PLAYBACK_CHANNELS); */
 	if (emu->card_capabilities->emu_model) {
 		/* EMU1010 Outputs from PCM Front, Rear, Center, LFE, Side */
-		snd_printk(KERN_INFO "EMU outputs on\n");
+		dev_info(emu->card->dev, "EMU outputs on\n");
 		for (z = 0; z < 8; z++) {
 			if (emu->card_capabilities->ca0108_chip) {
 				A_OP(icode, &ptr, iACC3, A3_EMU32OUT(z), A_GPR(playback + SND_EMU10K1_PLAYBACK_CHANNELS + z), A_C_00000000, A_C_00000000);
@@ -1571,7 +1571,9 @@ A_OP(icode, &ptr, iMAC0, A_GPR(var), A_GPR(var), A_GPR(vol), A_EXTIN(input))
 		A_SWITCH(icode, &ptr, tmp + 1, playback + SND_EMU10K1_PLAYBACK_CHANNELS + z, tmp + 1);
 		if ((z==1) && (emu->card_capabilities->spdif_bug)) {
 			/* Due to a SPDIF output bug on some Audigy cards, this code delays the Right channel by 1 sample */
-			snd_printk(KERN_INFO "Installing spdif_bug patch: %s\n", emu->card_capabilities->name);
+			dev_info(emu->card->dev,
+				 "Installing spdif_bug patch: %s\n",
+				 emu->card_capabilities->name);
 			A_OP(icode, &ptr, iACC3, A_EXTOUT(A_EXTOUT_FRONT_L + z), A_GPR(gpr - 3), A_C_00000000, A_C_00000000);
 			A_OP(icode, &ptr, iACC3, A_GPR(gpr - 3), A_GPR(tmp + 0), A_GPR(tmp + 1), A_C_00000000);
 		} else {
@@ -1595,19 +1597,19 @@ A_OP(icode, &ptr, iMAC0, A_GPR(var), A_GPR(var), A_GPR(vol), A_EXTIN(input))
 
 	if (emu->card_capabilities->emu_model) {
 		if (emu->card_capabilities->ca0108_chip) {
-			snd_printk(KERN_INFO "EMU2 inputs on\n");
+			dev_info(emu->card->dev, "EMU2 inputs on\n");
 			for (z = 0; z < 0x10; z++) {
 				snd_emu10k1_audigy_dsp_convert_32_to_2x16( icode, &ptr, tmp, 
 									bit_shifter16,
 									A3_EMU32IN(z),
 									A_FXBUS2(z*2) );
 			}
 		} else {
-			snd_printk(KERN_INFO "EMU inputs on\n");
+			dev_info(emu->card->dev, "EMU inputs on\n");
 			/* Capture 16 (originally 8) channels of S32_LE sound */
 
 			/*
-			printk(KERN_DEBUG "emufx.c: gpr=0x%x, tmp=0x%x\n",
+			dev_dbg(emu->card->dev, "emufx.c: gpr=0x%x, tmp=0x%x\n",
 			       gpr, tmp);
 			*/
 			/* For the EMU1010: How to get 32bit values from the DSP. High 16bits into L, low 16bits into R. */

sound/pci/emu10k1/emumixer.c

@@ -1853,8 +1853,10 @@ int snd_emu10k1_mixer(struct snd_emu10k1 *emu,
 		if ((err = snd_ac97_mixer(pbus, &ac97, &emu->ac97)) < 0) {
 			if (emu->card_capabilities->ac97_chip == 1)
 				return err;
-			snd_printd(KERN_INFO "emu10k1: AC97 is optional on this board\n");
-			snd_printd(KERN_INFO"          Proceeding without ac97 mixers...\n");
+			dev_info(emu->card->dev,
+				 "AC97 is optional on this board\n");
+			dev_info(emu->card->dev,
+				 "Proceeding without ac97 mixers...\n");
 			snd_device_free(emu->card, pbus);
 			goto no_ac97; /* FIXME: get rid of ugly gotos.. */
 		}

sound/pci/emu10k1/emumpu401.c

@@ -64,7 +64,9 @@ static void mpu401_clear_rx(struct snd_emu10k1 *emu, struct snd_emu10k1_midi *mp
 		mpu401_read_data(emu, mpu);
 #ifdef CONFIG_SND_DEBUG
 	if (timeout <= 0)
-		snd_printk(KERN_ERR "cmd: clear rx timeout (status = 0x%x)\n", mpu401_read_stat(emu, mpu));
+		dev_err(emu->card->dev,
+			"cmd: clear rx timeout (status = 0x%x)\n",
+			mpu401_read_stat(emu, mpu));
 #endif
 }
 
@@ -141,7 +143,8 @@ static int snd_emu10k1_midi_cmd(struct snd_emu10k1 * emu, struct snd_emu10k1_mid
 	}
 	spin_unlock_irqrestore(&midi->input_lock, flags);
 	if (!ok) {
-		snd_printk(KERN_ERR "midi_cmd: 0x%x failed at 0x%lx (status = 0x%x, data = 0x%x)!!!\n",
+		dev_err(emu->card->dev,
+			"midi_cmd: 0x%x failed at 0x%lx (status = 0x%x, data = 0x%x)!!!\n",
 			   cmd, emu->port,
 			   mpu401_read_stat(emu, midi),
 			   mpu401_read_data(emu, midi));