Merge tag 'mtd/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/mtd/linux Pull MTD updates from Richard Weinberger: "NAND core changes: - Drop useless 'depends on' in Kconfig - Add an extra level in the Kconfig hierarchy - Trivial spellings - Dynamic allocation of the interface configurations - Dropping the default ONFI timing mode - Various cleanup (types, structures, naming, comments) - Hide the chip->data_interface indirection - Add the generic rb-gpios property - Add the ->choose_interface_config() hook - Introduce nand_choose_best_sdr_timings() - Use default values for tPROG_max and tBERS_max - Avoid redefining tR_max and tCCS_min - Add a helper to find the closest ONFI mode - bcm63xx MTD parsers: simplify CFE detection Raw NAND controller drivers changes: - fsl-upm: Deprecation of specific DT properties - fsl_upm: Driver rework and cleanup in favor of ->exec_op() - Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use - brcmnand: ECC error handling on EDU transfers - brcmnand: Don't default to EDU transfers - qcom: Set BAM mode only if not set already - qcom: Avoid write to unavailable register - gpio: Driver rework in favor of ->exec_op() - tango: ->exec_op() conversion - mtk: ->exec_op() conversion Raw NAND chip drivers changes: - toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4 - toshiba: Implement ->choose_interface_config() for TC58NVG0S3E - toshiba: Implement ->choose_interface_config() for TC58TEG5DCLTA00 - hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC HyperBus changes: - DMA support for TI's AM654 HyperBus controller driver. - HyperBus frontend driver for Renesas RPC-IF driver. SPI NOR core changes: - Support for Winbond w25q64jwm flash - Enable 4K sector support for mx25l12805d SPI NOR controller drivers changes: - intel-spi Add Alder Lake-S PCI ID MTD Core changes: - mtdoops: Don't run panic write twice - mtdconcat: Correctly handle panic write - Use DEFINE_SHOW_ATTRIBUTE" * tag 'mtd/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (76 commits) mtd: hyperbus: Fix build failure when only RPCIF_HYPERBUS is enabled mtd: hyperbus: add Renesas RPC-IF driver Revert "mtd: spi-nor: Prefer asynchronous probe" mtd: parsers: bcm63xx: Do not make it modular mtd: spear_smi: Enable compile testing mtd: maps: vmu-flash: fix typos for struct memcard mtd: physmap: Add Baikal-T1 physically mapped ROM support mtd: maps: vmu-flash: simplify the return expression of probe_maple_vmu mtd: onenand: simplify the return expression of onenand_transfer_auto_oob mtd: rawnand: cadence: remove a redundant dev_err call mtd: rawnand: ams-delta: Fix non-OF build warning mtd: rawnand: Don't overwrite the error code from nand_set_ecc_soft_ops() mtd: rawnand: Introduce nand_set_ecc_on_host_ops() mtd: rawnand: atmel: Check return values for nand_read_data_op mtd: rawnand: vf610: Remove unused function vf610_nfc_transfer_size() mtd: rawnand: qcom: Simplify with dev_err_probe() mtd: rawnand: marvell: Fix and update kerneldoc mtd: rawnand: marvell: Simplify with dev_err_probe() mtd: rawnand: gpmi: Simplify with dev_err_probe() mtd: rawnand: atmel: Simplify with dev_err_probe() ...
mariux64 · Oct 17, 2020 · 6f78b9a · 6f78b9a
2 parents 5a77b6a + 6402f4c
commit 6f78b9a
Show file tree

Hide file tree

Showing 121 changed files with 2,316 additions and 1,076 deletions.
diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -55,6 +55,37 @@ patternProperties:
         $ref: /schemas/types.yaml#/definitions/string
         enum: [none, soft, hw, hw_syndrome, hw_oob_first, on-die]
 
+      nand-ecc-engine:
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/phandle
+        description: |
+          A phandle on the hardware ECC engine if any. There are
+          basically three possibilities:
+          1/ The ECC engine is part of the NAND controller, in this
+          case the phandle should reference the parent node.
+          2/ The ECC engine is part of the NAND part (on-die), in this
+          case the phandle should reference the node itself.
+          3/ The ECC engine is external, in this case the phandle should
+          reference the specific ECC engine node.
+
+      nand-use-soft-ecc-engine:
+        type: boolean
+        description: Use a software ECC engine.
+
+      nand-no-ecc-engine:
+        type: boolean
+        description: Do not use any ECC correction.
+
+      nand-ecc-placement:
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/string
+          - enum: [ oob, interleaved ]
+        description:
+          Location of the ECC bytes. This location is unknown by default
+          but can be explicitly set to "oob", if all ECC bytes are
+          known to be stored in the OOB area, or "interleaved" if ECC
+          bytes will be interleaved with regular data in the main area.
+
       nand-ecc-algo:
         description:
           Desired ECC algorithm.

diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
@@ -306,7 +306,7 @@ static struct davinci_nand_pdata da830_evm_nand_pdata = {
 	.core_chipsel	= 1,
 	.parts		= da830_evm_nand_partitions,
 	.nr_parts	= ARRAY_SIZE(da830_evm_nand_partitions),
-	.ecc_mode	= NAND_ECC_HW,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
 	.ecc_bits	= 4,
 	.bbt_options	= NAND_BBT_USE_FLASH,
 	.bbt_td		= &da830_evm_nand_bbt_main_descr,

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
@@ -239,7 +239,7 @@ static struct davinci_nand_pdata da850_evm_nandflash_data = {
 	.core_chipsel	= 1,
 	.parts		= da850_evm_nandflash_partition,
 	.nr_parts	= ARRAY_SIZE(da850_evm_nandflash_partition),
-	.ecc_mode	= NAND_ECC_HW,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
 	.ecc_bits	= 4,
 	.bbt_options	= NAND_BBT_USE_FLASH,
 	.timing		= &da850_evm_nandflash_timing,

diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -82,7 +82,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
 	.mask_chipsel		= BIT(14),
 	.parts			= davinci_nand_partitions,
 	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.ecc_mode		= NAND_ECC_HW,
+	.engine_type		= NAND_ECC_ENGINE_TYPE_ON_HOST,
 	.bbt_options		= NAND_BBT_USE_FLASH,
 	.ecc_bits		= 4,
 };

diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -76,7 +76,8 @@ static struct davinci_nand_pdata davinci_nand_data = {
 	.mask_chipsel		= BIT(14),
 	.parts			= davinci_nand_partitions,
 	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.ecc_mode		= NAND_ECC_HW_SYNDROME,
+	.engine_type		= NAND_ECC_ENGINE_TYPE_ON_HOST,
+	.ecc_placement		= NAND_ECC_PLACEMENT_INTERLEAVED,
 	.ecc_bits		= 4,
 	.bbt_options		= NAND_BBT_USE_FLASH,
 };

diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -146,7 +146,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
 	.mask_chipsel		= BIT(14),
 	.parts			= davinci_nand_partitions,
 	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.ecc_mode		= NAND_ECC_HW,
+	.engine_type		= NAND_ECC_ENGINE_TYPE_ON_HOST,
 	.bbt_options		= NAND_BBT_USE_FLASH,
 	.ecc_bits		= 4,
 };

diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -162,7 +162,7 @@ static struct davinci_nand_pdata davinci_evm_nandflash_data = {
 	.core_chipsel	= 0,
 	.parts		= davinci_evm_nandflash_partition,
 	.nr_parts	= ARRAY_SIZE(davinci_evm_nandflash_partition),
-	.ecc_mode	= NAND_ECC_HW,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
 	.ecc_bits	= 1,
 	.bbt_options	= NAND_BBT_USE_FLASH,
 	.timing		= &davinci_evm_nandflash_timing,

diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -91,7 +91,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
 	.mask_ale 		= 0x40000,
 	.parts			= davinci_nand_partitions,
 	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.ecc_mode		= NAND_ECC_HW,
+	.engine_type		= NAND_ECC_ENGINE_TYPE_ON_HOST,
 	.ecc_bits		= 1,
 	.options		= 0,
 };

diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -432,7 +432,7 @@ static struct davinci_nand_pdata mityomapl138_nandflash_data = {
 	.core_chipsel	= 1,
 	.parts		= mityomapl138_nandflash_partition,
 	.nr_parts	= ARRAY_SIZE(mityomapl138_nandflash_partition),
-	.ecc_mode	= NAND_ECC_HW,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
 	.bbt_options	= NAND_BBT_USE_FLASH,
 	.options	= NAND_BUSWIDTH_16,
 	.ecc_bits	= 1, /* 4 bit mode is not supported with 16 bit NAND */

diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -90,7 +90,7 @@ static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = {
 	.core_chipsel	= 0,
 	.parts		= davinci_ntosd2_nandflash_partition,
 	.nr_parts	= ARRAY_SIZE(davinci_ntosd2_nandflash_partition),
-	.ecc_mode	= NAND_ECC_HW,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
 	.ecc_bits	= 1,
 	.bbt_options	= NAND_BBT_USE_FLASH,
 };

diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -206,7 +206,7 @@ static struct davinci_nand_pdata omapl138_hawk_nandflash_data = {
 	.core_chipsel	= 1,
 	.parts		= omapl138_hawk_nandflash_partition,
 	.nr_parts	= ARRAY_SIZE(omapl138_hawk_nandflash_partition),
-	.ecc_mode	= NAND_ECC_HW,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
 	.ecc_bits	= 4,
 	.bbt_options	= NAND_BBT_USE_FLASH,
 	.options	= NAND_BUSWIDTH_16,

diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c
@@ -191,7 +191,7 @@ static struct s3c2410_platform_nand smdk_nand_info = {
 	.twrph1		= 20,
 	.nr_sets	= ARRAY_SIZE(smdk_nand_sets),
 	.sets		= smdk_nand_sets,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 /* devices we initialise */

diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -218,7 +218,7 @@ static struct s3c2410_platform_nand __initdata anubis_nand_info = {
 	.nr_sets	= ARRAY_SIZE(anubis_nand_sets),
 	.sets		= anubis_nand_sets,
 	.select_chip	= anubis_nand_select,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 /* IDE channels */

diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -109,7 +109,7 @@ static struct s3c2410_platform_nand __initdata at2440evb_nand_info = {
 	.twrph1		= 40,
 	.nr_sets	= ARRAY_SIZE(at2440evb_nand_sets),
 	.sets		= at2440evb_nand_sets,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 /* DM9000AEP 10/100 ethernet controller */

diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -294,7 +294,7 @@ static struct s3c2410_platform_nand __initdata bast_nand_info = {
 	.nr_sets	= ARRAY_SIZE(bast_nand_sets),
 	.sets		= bast_nand_sets,
 	.select_chip	= bast_nand_select,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 /* DM9000 */

diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -417,7 +417,7 @@ static struct s3c2410_platform_nand __initdata gta02_nand_info = {
 	.twrph1		= 15,
 	.nr_sets	= ARRAY_SIZE(gta02_nand_sets),
 	.sets		= gta02_nand_sets,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 

diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -228,7 +228,7 @@ static struct s3c2410_platform_nand __initdata jive_nand_info = {
 	.twrph1		= 40,
 	.sets		= jive_nand_sets,
 	.nr_sets	= ARRAY_SIZE(jive_nand_sets),
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 static int __init jive_mtdset(char *options)

diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -296,7 +296,7 @@ static struct s3c2410_platform_nand mini2440_nand_info __initdata = {
 	.nr_sets	= ARRAY_SIZE(mini2440_nand_sets),
 	.sets		= mini2440_nand_sets,
 	.ignore_unset_ecc = 1,
-	.ecc_mode	= NAND_ECC_HW,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
 };
 
 /* DM9000AEP 10/100 ethernet controller */

diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -234,7 +234,7 @@ static struct s3c2410_platform_nand __initdata osiris_nand_info = {
 	.nr_sets	= ARRAY_SIZE(osiris_nand_sets),
 	.sets		= osiris_nand_sets,
 	.select_chip	= osiris_nand_select,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 /* PCMCIA control and configuration */

diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -287,7 +287,7 @@ static struct s3c2410_platform_nand __initdata qt2410_nand_info = {
 	.twrph1		= 20,
 	.nr_sets	= ARRAY_SIZE(qt2410_nand_sets),
 	.sets		= qt2410_nand_sets,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 /* UDC */

diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -620,7 +620,7 @@ static struct s3c2410_platform_nand rx1950_nand_info = {
 	.twrph1 = 15,
 	.nr_sets = ARRAY_SIZE(rx1950_nand_sets),
 	.sets = rx1950_nand_sets,
-	.ecc_mode = NAND_ECC_SOFT,
+	.engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {

diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -158,7 +158,7 @@ static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
 	.twrph1		= 15,
 	.nr_sets	= ARRAY_SIZE(rx3715_nand_sets),
 	.sets		= rx3715_nand_sets,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 static struct platform_device *rx3715_devices[] __initdata = {

diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -112,7 +112,7 @@ static struct s3c2410_platform_nand __initdata vstms_nand_info = {
 	.twrph1		= 20,
 	.nr_sets	= ARRAY_SIZE(vstms_nand_sets),
 	.sets		= vstms_nand_sets,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 static struct platform_device *vstms_devices[] __initdata = {

diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -199,7 +199,7 @@ static struct s3c2410_platform_nand hmt_nand_info = {
 	.twrph1		= 40,
 	.nr_sets	= ARRAY_SIZE(hmt_nand_sets),
 	.sets		= hmt_nand_sets,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 static struct gpio_led hmt_leds[] = {

diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -136,7 +136,7 @@ static struct s3c2410_platform_nand mini6410_nand_info = {
 	.twrph1		= 40,
 	.nr_sets	= ARRAY_SIZE(mini6410_nand_sets),
 	.sets		= mini6410_nand_sets,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 static struct s3c_fb_pd_win mini6410_lcd_type0_fb_win = {

diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -188,7 +188,7 @@ static struct s3c2410_platform_nand real6410_nand_info = {
 	.twrph1		= 40,
 	.nr_sets	= ARRAY_SIZE(real6410_nand_sets),
 	.sets		= real6410_nand_sets,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 static struct platform_device *real6410_devices[] __initdata = {

diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
@@ -91,7 +91,7 @@ config MTD_MCHP23K256
 
 config MTD_SPEAR_SMI
 	tristate "SPEAR MTD NOR Support through SMI controller"
-	depends on PLAT_SPEAR
+	depends on PLAT_SPEAR || COMPILE_TEST
 	default y
 	help
 	  This enable SNOR support on SPEAR platforms using SMI controller

diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c
@@ -436,7 +436,10 @@ static int flash_read (struct mtd_info *mtd,loff_t from,size_t len,size_t *retle
 	 {
 		int gap = BUSWIDTH - (from & (BUSWIDTH - 1));
 
-		while (len && gap--) *buf++ = read8 (from++), len--;
+		while (len && gap--) {
+			*buf++ = read8 (from++);
+			len--;
+		}
 	 }
 
    /* now we read dwords until we reach a non-dword boundary */
@@ -518,7 +521,10 @@ static int flash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen
 		i = n = 0;
 
 		while (gap--) tmp[i++] = 0xFF;
-		while (len && i < BUSWIDTH) tmp[i++] = buf[n++], len--;
+		while (len && i < BUSWIDTH) {
+			tmp[i++] = buf[n++];
+			len--;
+		}
 		while (i < BUSWIDTH) tmp[i++] = 0xFF;
 
 		if (!write_dword (aligned,*((__u32 *) tmp))) return (-EIO);

diff --git a/drivers/mtd/devices/spear_smi.c b/drivers/mtd/devices/spear_smi.c
@@ -793,7 +793,7 @@ static int spear_smi_probe_config_dt(struct platform_device *pdev,
 				     struct device_node *np)
 {
 	struct spear_smi_plat_data *pdata = dev_get_platdata(&pdev->dev);
-	struct device_node *pp = NULL;
+	struct device_node *pp;
 	const __be32 *addr;
 	u32 val;
 	int len;
@@ -812,7 +812,7 @@ static int spear_smi_probe_config_dt(struct platform_device *pdev,
 		return -ENOMEM;
 
 	/* Fill structs for each subnode (flash device) */
-	while ((pp = of_get_next_child(np, pp))) {
+	for_each_child_of_node(np, pp) {
 		pdata->np[i] = pp;
 
 		/* Read base-addr and size from DT */

diff --git a/drivers/mtd/hyperbus/Kconfig b/drivers/mtd/hyperbus/Kconfig
@@ -22,4 +22,11 @@ config HBMC_AM654
 	 This is the driver for HyperBus controller on TI's AM65x and
 	 other SoCs
 
+config RPCIF_HYPERBUS
+	tristate "Renesas RPC-IF HyperBus driver"
+	depends on RENESAS_RPCIF
+	depends on MTD_CFI_BE_BYTE_SWAP
+	help
+	  This option includes Renesas RPC-IF HyperBus support.
+
 endif # MTD_HYPERBUS
diff --git a/drivers/mtd/hyperbus/Makefile b/drivers/mtd/hyperbus/Makefile
@@ -2,3 +2,4 @@
 
 obj-$(CONFIG_MTD_HYPERBUS)	+= hyperbus-core.o
 obj-$(CONFIG_HBMC_AM654)	+= hbmc-am654.o
+obj-$(CONFIG_RPCIF_HYPERBUS)	+= rpc-if.o