Merge remote-tracking branches 'asoc/topic/nuc900', 'asoc/topic/omap'…

…, 'asoc/topic/pxa', 'asoc/topic/rcar', 'asoc/topic/rt5640' and 'asoc/topic/rt5645' into asoc-next
mariux64 · May 21, 2014 · 6f821c6 · 6f821c6
7 parents 6630f30 + 49e3c64 + 0596f70 + b452814 + e6b0d89 + 57f174f + 8c32570
commit 6f821c6
Show file tree

Hide file tree

Showing 60 changed files with 10,018 additions and 812 deletions.
diff --git a/Documentation/devicetree/bindings/sound/nokia,rx51.txt b/Documentation/devicetree/bindings/sound/nokia,rx51.txt
@@ -0,0 +1,27 @@
+* Nokia N900 audio setup
+
+Required properties:
+- compatible: Should contain "nokia,n900-audio"
+- nokia,cpu-dai: phandle for the McBSP node
+- nokia,audio-codec: phandles for the main TLV320AIC3X node and the
+                     auxiliary TLV320AIC3X node (in this order)
+- nokia,headphone-amplifier: phandle for the TPA6130A2 node
+- tvout-selection-gpios: GPIO for tvout selection
+- jack-detection-gpios: GPIO for jack detection
+- eci-switch-gpios: GPIO for ECI (Enhancement Control Interface) switch
+- speaker-amplifier-gpios: GPIO for speaker amplifier
+
+Example:
+
+sound {
+	compatible = "nokia,n900-audio";
+
+	nokia,cpu-dai = <&mcbsp2>;
+	nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>;
+	nokia,headphone-amplifier = <&tpa6130a2>;
+
+	tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */
+	jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */
+	eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */
+	speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
+};
diff --git a/Documentation/devicetree/bindings/sound/rt5640.txt b/Documentation/devicetree/bindings/sound/rt5640.txt
@@ -1,10 +1,10 @@
-RT5640 audio CODEC
+RT5640/RT5639 audio CODEC
 
 This device supports I2C only.
 
 Required properties:
 
-- compatible : "realtek,rt5640".
+- compatible : One of "realtek,rt5640" or "realtek,rt5639".
 
 - reg : The I2C address of the device.
 
@@ -18,7 +18,7 @@ Optional properties:
 
 - realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
 
-Pins on the device (for linking into audio routes):
+Pins on the device (for linking into audio routes) for RT5639/RT5640:
 
   * DMIC1
   * DMIC2
@@ -31,13 +31,16 @@ Pins on the device (for linking into audio routes):
   * HPOR
   * LOUTL
   * LOUTR
-  * MONOP
-  * MONON
   * SPOLP
   * SPOLN
   * SPORP
   * SPORN
 
+Additional pins on the device for RT5640:
+
+  * MONOP
+  * MONON
+
 Example:
 
 rt5640 {

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
@@ -673,7 +673,7 @@
 			renesas,clock-indices = <
 				R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2
 				R8A7790_CLK_CMT0 R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1
-				R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_RT R8A7790_CLK_VSP1_SY
+				R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S
 			>;
 			clock-output-names =
 				"tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
@@ -688,7 +688,7 @@
 			renesas,clock-indices = <
 				R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2
 				R8A7791_CLK_CMT0 R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1
-				R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_SY
+				R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_S
 			>;
 			clock-output-names =
 				"tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",

diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
@@ -21,8 +21,8 @@ obj-$(CONFIG_ARCH_EMEV2)	+= setup-emev2.o
 obj-$(CONFIG_ARCH_R7S72100)	+= setup-r7s72100.o
 
 # Clock objects
-ifndef CONFIG_COMMON_CLK
 obj-y				+= clock.o
+ifndef CONFIG_COMMON_CLK
 obj-$(CONFIG_ARCH_SH7372)	+= clock-sh7372.o
 obj-$(CONFIG_ARCH_SH73A0)	+= clock-sh73a0.o
 obj-$(CONFIG_ARCH_R8A73A4)	+= clock-r8a73a4.o

diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c
@@ -345,24 +345,39 @@ static struct rsnd_ssi_platform_info rsnd_ssi[] = {
 	RSND_SSI_UNUSED, /* SSI 0 */
 	RSND_SSI_UNUSED, /* SSI 1 */
 	RSND_SSI_UNUSED, /* SSI 2 */
-	RSND_SSI_SET(1, HPBDMA_SLAVE_HPBIF3_TX, gic_iid(0x85), RSND_SSI_PLAY),
-	RSND_SSI_SET(2, HPBDMA_SLAVE_HPBIF4_RX, gic_iid(0x85), RSND_SSI_CLK_PIN_SHARE),
-	RSND_SSI_SET(0, HPBDMA_SLAVE_HPBIF5_TX, gic_iid(0x86), RSND_SSI_PLAY),
-	RSND_SSI_SET(0, HPBDMA_SLAVE_HPBIF6_RX, gic_iid(0x86), 0),
-	RSND_SSI_SET(3, HPBDMA_SLAVE_HPBIF7_TX, gic_iid(0x86), RSND_SSI_PLAY),
-	RSND_SSI_SET(4, HPBDMA_SLAVE_HPBIF8_RX, gic_iid(0x86), RSND_SSI_CLK_PIN_SHARE),
+	RSND_SSI(HPBDMA_SLAVE_HPBIF3_TX, gic_iid(0x85), 0),
+	RSND_SSI(HPBDMA_SLAVE_HPBIF4_RX, gic_iid(0x85), RSND_SSI_CLK_PIN_SHARE),
+	RSND_SSI(HPBDMA_SLAVE_HPBIF5_TX, gic_iid(0x86), 0),
+	RSND_SSI(HPBDMA_SLAVE_HPBIF6_RX, gic_iid(0x86), 0),
+	RSND_SSI(HPBDMA_SLAVE_HPBIF7_TX, gic_iid(0x86), 0),
+	RSND_SSI(HPBDMA_SLAVE_HPBIF8_RX, gic_iid(0x86), RSND_SSI_CLK_PIN_SHARE),
 };
 
-static struct rsnd_scu_platform_info rsnd_scu[9] = {
-	{ .flags = 0, }, /* SRU 0 */
-	{ .flags = 0, }, /* SRU 1 */
-	{ .flags = 0, }, /* SRU 2 */
-	{ .flags = RSND_SCU_USE_HPBIF, },
-	{ .flags = RSND_SCU_USE_HPBIF, },
-	{ .flags = RSND_SCU_USE_HPBIF, },
-	{ .flags = RSND_SCU_USE_HPBIF, },
-	{ .flags = RSND_SCU_USE_HPBIF, },
-	{ .flags = RSND_SCU_USE_HPBIF, },
+static struct rsnd_src_platform_info rsnd_src[9] = {
+	RSND_SRC_UNUSED, /* SRU 0 */
+	RSND_SRC_UNUSED, /* SRU 1 */
+	RSND_SRC_UNUSED, /* SRU 2 */
+	RSND_SRC(0, 0),
+	RSND_SRC(0, 0),
+	RSND_SRC(0, 0),
+	RSND_SRC(0, 0),
+	RSND_SRC(0, 0),
+	RSND_SRC(0, 0),
+};
+
+static struct rsnd_dai_platform_info rsnd_dai[] = {
+	{
+		.playback = { .ssi = &rsnd_ssi[5], .src = &rsnd_src[5] },
+		.capture  = { .ssi = &rsnd_ssi[6], .src = &rsnd_src[6] },
+	}, {
+		.playback = { .ssi = &rsnd_ssi[3], .src = &rsnd_src[3] },
+	}, {
+		.capture  = { .ssi = &rsnd_ssi[4], .src = &rsnd_src[4] },
+	}, {
+		.playback = { .ssi = &rsnd_ssi[7], .src = &rsnd_src[7] },
+	}, {
+		.capture  = { .ssi = &rsnd_ssi[8], .src = &rsnd_src[8] },
+	},
 };
 
 enum {
@@ -437,8 +452,10 @@ static struct rcar_snd_info rsnd_info = {
 	.flags		= RSND_GEN1,
 	.ssi_info	= rsnd_ssi,
 	.ssi_info_nr	= ARRAY_SIZE(rsnd_ssi),
-	.scu_info	= rsnd_scu,
-	.scu_info_nr	= ARRAY_SIZE(rsnd_scu),
+	.src_info	= rsnd_src,
+	.src_info_nr	= ARRAY_SIZE(rsnd_src),
+	.dai_info	= rsnd_dai,
+	.dai_info_nr	= ARRAY_SIZE(rsnd_dai),
 	.start		= rsnd_start,
 	.stop		= rsnd_stop,
 };
@@ -591,6 +608,7 @@ static void __init bockw_init(void)
 {
 	void __iomem *base;
 	struct clk *clk;
+	struct platform_device *pdev;
 	int i;
 
 	r8a7778_clock_init();
@@ -673,9 +691,6 @@ static void __init bockw_init(void)
 	}
 
 	/* for Audio */
-	clk = clk_get(NULL, "audio_clk_b");
-	clk_set_rate(clk, 24576000);
-	clk_put(clk);
 	rsnd_codec_power(5, 1); /* enable ak4642 */
 
 	platform_device_register_simple(
@@ -684,11 +699,15 @@ static void __init bockw_init(void)
 	platform_device_register_simple(
 		"ak4554-adc-dac", 1, NULL, 0);
 
-	platform_device_register_resndata(
+	pdev = platform_device_register_resndata(
 		&platform_bus, "rcar_sound", -1,
 		rsnd_resources, ARRAY_SIZE(rsnd_resources),
 		&rsnd_info, sizeof(rsnd_info));
 
+	clk = clk_get(&pdev->dev, "clk_b");
+	clk_set_rate(clk, 24576000);
+	clk_put(clk);
+
 	for (i = 0; i < ARRAY_SIZE(rsnd_card_info); i++) {
 		struct platform_device_info cardinfo = {
 			.parent         = &platform_bus,

diff --git a/arch/arm/mach-shmobile/board-koelsch-reference.c b/arch/arm/mach-shmobile/board-koelsch-reference.c
@@ -19,12 +19,11 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-#include <linux/clk.h>
-#include <linux/clkdev.h>
 #include <linux/dma-mapping.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
 #include <linux/platform_data/rcar-du.h>
+#include <mach/clock.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/rcar-gen2.h>
@@ -82,49 +81,50 @@ static void __init koelsch_add_du_device(void)
 	platform_device_register_full(&info);
 }
 
-static void __init koelsch_add_standard_devices(void)
-{
-	/*
-	 * This is a really crude hack to provide clkdev support to the CMT and
-	 * DU devices until they get moved to DT.
-	 */
-	static const struct clk_name {
-		const char *clk;
-		const char *con_id;
-		const char *dev_id;
-	} clk_names[] = {
-		{ "cmt0", NULL, "sh_cmt.0" },
-		{ "scifa0", NULL, "sh-sci.0" },
-		{ "scifa1", NULL, "sh-sci.1" },
-		{ "scifb0", NULL, "sh-sci.2" },
-		{ "scifb1", NULL, "sh-sci.3" },
-		{ "scifb2", NULL, "sh-sci.4" },
-		{ "scifa2", NULL, "sh-sci.5" },
-		{ "scif0", NULL, "sh-sci.6" },
-		{ "scif1", NULL, "sh-sci.7" },
-		{ "scif2", NULL, "sh-sci.8" },
-		{ "scif3", NULL, "sh-sci.9" },
-		{ "scif4", NULL, "sh-sci.10" },
-		{ "scif5", NULL, "sh-sci.11" },
-		{ "scifa3", NULL, "sh-sci.12" },
-		{ "scifa4", NULL, "sh-sci.13" },
-		{ "scifa5", NULL, "sh-sci.14" },
-		{ "du0", "du.0", "rcar-du-r8a7791" },
-		{ "du1", "du.1", "rcar-du-r8a7791" },
-		{ "lvds0", "lvds.0", "rcar-du-r8a7791" },
-	};
-	struct clk *clk;
-	unsigned int i;
+/*
+ * This is a really crude hack to provide clkdev support to platform
+ * devices until they get moved to DT.
+ */
+static const struct clk_name clk_names[] __initconst = {
+	{ "cmt0", NULL, "sh_cmt.0" },
+	{ "scifa0", NULL, "sh-sci.0" },
+	{ "scifa1", NULL, "sh-sci.1" },
+	{ "scifb0", NULL, "sh-sci.2" },
+	{ "scifb1", NULL, "sh-sci.3" },
+	{ "scifb2", NULL, "sh-sci.4" },
+	{ "scifa2", NULL, "sh-sci.5" },
+	{ "scif0", NULL, "sh-sci.6" },
+	{ "scif1", NULL, "sh-sci.7" },
+	{ "scif2", NULL, "sh-sci.8" },
+	{ "scif3", NULL, "sh-sci.9" },
+	{ "scif4", NULL, "sh-sci.10" },
+	{ "scif5", NULL, "sh-sci.11" },
+	{ "scifa3", NULL, "sh-sci.12" },
+	{ "scifa4", NULL, "sh-sci.13" },
+	{ "scifa5", NULL, "sh-sci.14" },
+	{ "du0", "du.0", "rcar-du-r8a7791" },
+	{ "du1", "du.1", "rcar-du-r8a7791" },
+	{ "lvds0", "lvds.0", "rcar-du-r8a7791" },
+};
 
-	for (i = 0; i < ARRAY_SIZE(clk_names); ++i) {
-		clk = clk_get(NULL, clk_names[i].clk);
-		if (!IS_ERR(clk)) {
-			clk_register_clkdev(clk, clk_names[i].con_id,
-					    clk_names[i].dev_id);
-			clk_put(clk);
-		}
-	}
+/*
+ * This is a really crude hack to work around core platform clock issues
+ */
+static const struct clk_name clk_enables[] __initconst = {
+	{ "ether", NULL, "ee700000.ethernet" },
+	{ "i2c2", NULL, "e6530000.i2c" },
+	{ "msiof0", NULL, "e6e20000.spi" },
+	{ "qspi_mod", NULL, "e6b10000.spi" },
+	{ "sdhi0", NULL, "ee100000.sd" },
+	{ "sdhi1", NULL, "ee140000.sd" },
+	{ "sdhi2", NULL, "ee160000.sd" },
+	{ "thermal", NULL, "e61f0000.thermal" },
+};
 
+static void __init koelsch_add_standard_devices(void)
+{
+	shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), false);
+	shmobile_clk_workaround(clk_enables, ARRAY_SIZE(clk_enables), true);
 	r8a7791_add_dt_devices();
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 

diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c
@@ -216,7 +216,7 @@ static const struct spi_board_info spi_info[] __initconst = {
 	{
 		.modalias	= "m25p80",
 		.platform_data	= &spi_flash_data,
-		.mode		= SPI_MODE_0,
+		.mode		= SPI_MODE_0 | SPI_TX_QUAD | SPI_RX_QUAD,
 		.max_speed_hz	= 30000000,
 		.bus_num	= 0,
 		.chip_select	= 0,