net: dsa: mv88e6xxx: Add MDIO interrupts for internal PHYs

When registering an MDIO bus, it is possible to pass an array of
interrupts, one per address on the bus. phylib will then associate the
interrupt to the PHY device, if no other interrupt is provided.

Some of the global2 interrupts are PHY interrupts. Place them into the
MDIO bus structure.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/dsa/mv88e6xxx/chip.c

@@ -2293,12 +2293,19 @@ static int mv88e6xxx_mdio_register(struct mv88e6xxx_chip *chip,
 	bus->write = mv88e6xxx_mdio_write;
 	bus->parent = chip->dev;
 
+	if (!external) {
+		err = mv88e6xxx_g2_irq_mdio_setup(chip, bus);
+		if (err)
+			return err;
+	}
+
 	if (np)
 		err = of_mdiobus_register(bus, np);
 	else
 		err = mdiobus_register(bus);
 	if (err) {
 		dev_err(chip->dev, "Cannot register MDIO bus (%d)\n", err);
+		mv88e6xxx_g2_irq_mdio_free(chip, bus);
 		return err;
 	}
 
@@ -2325,6 +2332,9 @@ static void mv88e6xxx_mdios_unregister(struct mv88e6xxx_chip *chip)
 	list_for_each_entry(mdio_bus, &chip->mdios, list) {
 		bus = mdio_bus->bus;
 
+		if (!mdio_bus->external)
+			mv88e6xxx_g2_irq_mdio_free(chip, bus);
+
 		mdiobus_unregister(bus);
 	}
 }

drivers/net/dsa/mv88e6xxx/global2.c

@@ -1107,6 +1107,38 @@ int mv88e6xxx_g2_irq_setup(struct mv88e6xxx_chip *chip)
 	return err;
 }
 
+int mv88e6xxx_g2_irq_mdio_setup(struct mv88e6xxx_chip *chip,
+				struct mii_bus *bus)
+{
+	int phy, irq, err, err_phy;
+
+	for (phy = 0; phy < chip->info->num_internal_phys; phy++) {
+		irq = irq_find_mapping(chip->g2_irq.domain, phy);
+		if (irq < 0) {
+			err = irq;
+			goto out;
+		}
+		bus->irq[chip->info->port_base_addr + phy] = irq;
+	}
+	return 0;
+out:
+	err_phy = phy;
+
+	for (phy = 0; phy < err_phy; phy++)
+		irq_dispose_mapping(bus->irq[phy]);
+
+	return err;
+}
+
+void mv88e6xxx_g2_irq_mdio_free(struct mv88e6xxx_chip *chip,
+				struct mii_bus *bus)
+{
+	int phy;
+
+	for (phy = 0; phy < chip->info->num_internal_phys; phy++)
+		irq_dispose_mapping(bus->irq[phy]);
+}
+
 int mv88e6xxx_g2_setup(struct mv88e6xxx_chip *chip)
 {
 	u16 reg;

drivers/net/dsa/mv88e6xxx/global2.h

@@ -317,6 +317,11 @@ int mv88e6xxx_g2_setup(struct mv88e6xxx_chip *chip);
 int mv88e6xxx_g2_irq_setup(struct mv88e6xxx_chip *chip);
 void mv88e6xxx_g2_irq_free(struct mv88e6xxx_chip *chip);
 
+int mv88e6xxx_g2_irq_mdio_setup(struct mv88e6xxx_chip *chip,
+				struct mii_bus *bus);
+void mv88e6xxx_g2_irq_mdio_free(struct mv88e6xxx_chip *chip,
+				struct mii_bus *bus);
+
 int mv88e6185_g2_mgmt_rsvd2cpu(struct mv88e6xxx_chip *chip);
 int mv88e6352_g2_mgmt_rsvd2cpu(struct mv88e6xxx_chip *chip);
 
@@ -450,6 +455,17 @@ static inline void mv88e6xxx_g2_irq_free(struct mv88e6xxx_chip *chip)
 {
 }
 
+static inline int mv88e6xxx_g2_irq_mdio_setup(struct mv88e6xxx_chip *chip,
+					      struct mii_bus *bus)
+{
+	return 0;
+}
+
+static inline void mv88e6xxx_g2_irq_mdio_free(struct mv88e6xxx_chip *chip,
+					      struct mii_bus *bus)
+{
+}
+
 static inline int mv88e6185_g2_mgmt_rsvd2cpu(struct mv88e6xxx_chip *chip)
 {
 	return -EOPNOTSUPP;