Merge tag 'efi-fixes-for-v6.6-3' of git://git.kernel.org/pub/scm/linu…

…x/kernel/git/efi/efi

Pull EFI fixes from Ard Biesheuvel:
 "The boot_params pointer fix uses a somewhat ugly extern struct
  declaration but this will be cleaned up the next cycle.

   - don't try to print warnings to the console when it is no longer
     available

   - fix theoretical memory leak in SSDT override handling

   - make sure that the boot_params global variable is set before the
     KASLR code attempts to hash it for 'randomness'

   - avoid soft lockups in the memory acceptance code"

* tag 'efi-fixes-for-v6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi/unaccepted: Fix soft lockups caused by parallel memory acceptance
  x86/boot: efistub: Assign global boot_params variable
  efi: fix memory leak in krealloc failure handling
  x86/efistub: Don't try to print after ExitBootService()

drivers/firmware/efi/efi.c

@@ -273,9 +273,13 @@ static __init int efivar_ssdt_load(void)
 		if (status == EFI_NOT_FOUND) {
 			break;
 		} else if (status == EFI_BUFFER_TOO_SMALL) {
-			name = krealloc(name, name_size, GFP_KERNEL);
-			if (!name)
+			efi_char16_t *name_tmp =
+				krealloc(name, name_size, GFP_KERNEL);
+			if (!name_tmp) {
+				kfree(name);
 				return -ENOMEM;
+			}
+			name = name_tmp;
 			continue;
 		}
 

drivers/firmware/efi/libstub/x86-stub.c

@@ -605,11 +605,8 @@ setup_e820(struct boot_params *params, struct setup_data *e820ext, u32 e820ext_s
 			break;
 
 		case EFI_UNACCEPTED_MEMORY:
-			if (!IS_ENABLED(CONFIG_UNACCEPTED_MEMORY)) {
-				efi_warn_once(
-"The system has unaccepted memory,  but kernel does not support it\nConsider enabling CONFIG_UNACCEPTED_MEMORY\n");
+			if (!IS_ENABLED(CONFIG_UNACCEPTED_MEMORY))
 				continue;
-			}
 			e820_type = E820_TYPE_RAM;
 			process_unaccepted_memory(d->phys_addr,
 						  d->phys_addr + PAGE_SIZE * d->num_pages);
@@ -852,6 +849,8 @@ void __noreturn efi_stub_entry(efi_handle_t handle,
 	unsigned long kernel_entry;
 	efi_status_t status;
 
+	boot_params_pointer = boot_params;
+
 	efi_system_table = sys_table_arg;
 	/* Check if we were booted by the EFI firmware */
 	if (efi_system_table->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE)

drivers/firmware/efi/libstub/x86-stub.h

@@ -2,6 +2,8 @@
 
 #include <linux/efi.h>
 
+extern struct boot_params *boot_params_pointer asm("boot_params");
+
 extern void trampoline_32bit_src(void *, bool);
 extern const u16 trampoline_ljmp_imm_offset;
 

drivers/firmware/efi/unaccepted_memory.c

@@ -5,9 +5,17 @@
 #include <linux/spinlock.h>
 #include <asm/unaccepted_memory.h>
 
-/* Protects unaccepted memory bitmap */
+/* Protects unaccepted memory bitmap and accepting_list */
 static DEFINE_SPINLOCK(unaccepted_memory_lock);
 
+struct accept_range {
+	struct list_head list;
+	unsigned long start;
+	unsigned long end;
+};
+
+static LIST_HEAD(accepting_list);
+
 /*
  * accept_memory() -- Consult bitmap and accept the memory if needed.
  *
@@ -24,6 +32,7 @@ void accept_memory(phys_addr_t start, phys_addr_t end)
 {
 	struct efi_unaccepted_memory *unaccepted;
 	unsigned long range_start, range_end;
+	struct accept_range range, *entry;
 	unsigned long flags;
 	u64 unit_size;
 
@@ -78,20 +87,67 @@ void accept_memory(phys_addr_t start, phys_addr_t end)
 	if (end > unaccepted->size * unit_size * BITS_PER_BYTE)
 		end = unaccepted->size * unit_size * BITS_PER_BYTE;
 
-	range_start = start / unit_size;
-
+	range.start = start / unit_size;
+	range.end = DIV_ROUND_UP(end, unit_size);
+retry:
 	spin_lock_irqsave(&unaccepted_memory_lock, flags);
+
+	/*
+	 * Check if anybody works on accepting the same range of the memory.
+	 *
+	 * The check is done with unit_size granularity. It is crucial to catch
+	 * all accept requests to the same unit_size block, even if they don't
+	 * overlap on physical address level.
+	 */
+	list_for_each_entry(entry, &accepting_list, list) {
+		if (entry->end < range.start)
+			continue;
+		if (entry->start >= range.end)
+			continue;
+
+		/*
+		 * Somebody else accepting the range. Or at least part of it.
+		 *
+		 * Drop the lock and retry until it is complete.
+		 */
+		spin_unlock_irqrestore(&unaccepted_memory_lock, flags);
+		goto retry;
+	}
+
+	/*
+	 * Register that the range is about to be accepted.
+	 * Make sure nobody else will accept it.
+	 */
+	list_add(&range.list, &accepting_list);
+
+	range_start = range.start;
 	for_each_set_bitrange_from(range_start, range_end, unaccepted->bitmap,
-				   DIV_ROUND_UP(end, unit_size)) {
+				   range.end) {
 		unsigned long phys_start, phys_end;
 		unsigned long len = range_end - range_start;
 
 		phys_start = range_start * unit_size + unaccepted->phys_base;
 		phys_end = range_end * unit_size + unaccepted->phys_base;
 
+		/*
+		 * Keep interrupts disabled until the accept operation is
+		 * complete in order to prevent deadlocks.
+		 *
+		 * Enabling interrupts before calling arch_accept_memory()
+		 * creates an opportunity for an interrupt handler to request
+		 * acceptance for the same memory. The handler will continuously
+		 * spin with interrupts disabled, preventing other task from
+		 * making progress with the acceptance process.
+		 */
+		spin_unlock(&unaccepted_memory_lock);
+
 		arch_accept_memory(phys_start, phys_end);
+
+		spin_lock(&unaccepted_memory_lock);
 		bitmap_clear(unaccepted->bitmap, range_start, len);
 	}
+
+	list_del(&range.list);
 	spin_unlock_irqrestore(&unaccepted_memory_lock, flags);
 }