r8169: improve conditional firmware loading for RTL8168d

Using constant MII_EXPANSION is misleading here because register 0x06
has a different meaning on page 0x0005. Here a proprietary PHY
parameter is read by writing the parameter id to register 0x05 on page
0x0005, followed by reading the parameter value from register 0x06.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/realtek/r8169_main.c

@@ -2297,14 +2297,6 @@ static void rtl_apply_firmware(struct rtl8169_private *tp)
 		rtl_fw_write_firmware(tp, tp->rtl_fw);
 }
 
-static void rtl_apply_firmware_cond(struct rtl8169_private *tp, u8 reg, u16 val)
-{
-	if (rtl_readphy(tp, reg) != val)
-		netif_warn(tp, hw, tp->dev, "chipset not ready for firmware\n");
-	else
-		rtl_apply_firmware(tp);
-}
-
 static void rtl8168_config_eee_mac(struct rtl8169_private *tp)
 {
 	/* Adjust EEE LED frequency */
@@ -2691,6 +2683,21 @@ static const struct phy_reg rtl8168d_1_phy_reg_init_1[] = {
 	{ 0x1f, 0x0002 }
 };
 
+static void rtl8168d_apply_firmware_cond(struct rtl8169_private *tp, u16 val)
+{
+	u16 reg_val;
+
+	rtl_writephy(tp, 0x1f, 0x0005);
+	rtl_writephy(tp, 0x05, 0x001b);
+	reg_val = rtl_readphy(tp, 0x06);
+	rtl_writephy(tp, 0x1f, 0x0000);
+
+	if (reg_val != val)
+		netif_warn(tp, hw, tp->dev, "chipset not ready for firmware\n");
+	else
+		rtl_apply_firmware(tp);
+}
+
 static void rtl8168d_1_hw_phy_config(struct rtl8169_private *tp)
 {
 	rtl_writephy_batch(tp, rtl8168d_1_phy_reg_init_0);
@@ -2737,13 +2744,9 @@ static void rtl8168d_1_hw_phy_config(struct rtl8169_private *tp)
 	rtl_writephy(tp, 0x1f, 0x0002);
 	rtl_w0w1_phy(tp, 0x02, 0x0100, 0x0600);
 	rtl_w0w1_phy(tp, 0x03, 0x0000, 0xe000);
-
-	rtl_writephy(tp, 0x1f, 0x0005);
-	rtl_writephy(tp, 0x05, 0x001b);
-
-	rtl_apply_firmware_cond(tp, MII_EXPANSION, 0xbf00);
-
 	rtl_writephy(tp, 0x1f, 0x0000);
+
+	rtl8168d_apply_firmware_cond(tp, 0xbf00);
 }
 
 static void rtl8168d_2_hw_phy_config(struct rtl8169_private *tp)
@@ -2782,13 +2785,9 @@ static void rtl8168d_2_hw_phy_config(struct rtl8169_private *tp)
 	/* Switching regulator Slew rate */
 	rtl_writephy(tp, 0x1f, 0x0002);
 	rtl_patchphy(tp, 0x0f, 0x0017);
-
-	rtl_writephy(tp, 0x1f, 0x0005);
-	rtl_writephy(tp, 0x05, 0x001b);
-
-	rtl_apply_firmware_cond(tp, MII_EXPANSION, 0xb300);
-
 	rtl_writephy(tp, 0x1f, 0x0000);
+
+	rtl8168d_apply_firmware_cond(tp, 0xb300);
 }
 
 static void rtl8168d_3_hw_phy_config(struct rtl8169_private *tp)