Merge branches 'acpi-scan', 'acpi-misc', 'acpi-button' and 'acpi-dptf'

* acpi-scan:
  ACPI: scan: Fix acpi_dma_configure_id() kerneldoc name

* acpi-misc:
  ACPI: GED: fix -Wformat
  ACPI: Fix whitespace inconsistencies

* acpi-button:
  ACPI: button: Add DMI quirk for Medion Akoya E2228T

* acpi-dptf:
  ACPI: DPTF: Support Alder Lake

drivers/acpi/acpi_video.c

@@ -578,7 +578,7 @@ acpi_video_bqc_value_to_level(struct acpi_video_device *device,
 				ACPI_VIDEO_FIRST_LEVEL - 1 - bqc_value;
 
 		level = device->brightness->levels[bqc_value +
-		                                   ACPI_VIDEO_FIRST_LEVEL];
+						   ACPI_VIDEO_FIRST_LEVEL];
 	} else {
 		level = bqc_value;
 	}
@@ -990,8 +990,8 @@ acpi_video_init_brightness(struct acpi_video_device *device)
 		goto out_free_levels;
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-	                  "found %d brightness levels\n",
-	                  br->count - ACPI_VIDEO_FIRST_LEVEL));
+			  "found %d brightness levels\n",
+			  br->count - ACPI_VIDEO_FIRST_LEVEL));
 	return 0;
 
 out_free_levels:

drivers/acpi/battery.c

@@ -987,7 +987,7 @@ static int acpi_battery_update(struct acpi_battery *battery, bool resume)
 	 */
 	if ((battery->state & ACPI_BATTERY_STATE_CRITICAL) ||
 	    (test_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags) &&
-            (battery->capacity_now <= battery->alarm)))
+	     (battery->capacity_now <= battery->alarm)))
 		acpi_pm_wakeup_event(&battery->device->dev);
 
 	return result;

drivers/acpi/button.c

@@ -89,7 +89,18 @@ static const struct dmi_system_id dmi_lid_quirks[] = {
 		 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "MEDION"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "E2215T MD60198"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "E2215T"),
+		},
+		.driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_OPEN,
+	},
+	{
+		/*
+		 * Medion Akoya E2228T, notification of the LID device only
+		 * happens on close, not on open and _LID always returns closed.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MEDION"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "E2228T"),
 		},
 		.driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_OPEN,
 	},

drivers/acpi/dptf/dptf_pch_fivr.c

@@ -106,6 +106,7 @@ static int pch_fivr_remove(struct platform_device *pdev)
 
 static const struct acpi_device_id pch_fivr_device_ids[] = {
 	{"INTC1045", 0},
+	{"INTC1049", 0},
 	{"", 0},
 };
 MODULE_DEVICE_TABLE(acpi, pch_fivr_device_ids);

drivers/acpi/dptf/dptf_power.c

@@ -229,6 +229,8 @@ static const struct acpi_device_id int3407_device_ids[] = {
 	{"INT3532", 0},
 	{"INTC1047", 0},
 	{"INTC1050", 0},
+	{"INTC1060", 0},
+	{"INTC1061", 0},
 	{"", 0},
 };
 MODULE_DEVICE_TABLE(acpi, int3407_device_ids);

drivers/acpi/dptf/int340x_thermal.c

@@ -25,10 +25,16 @@ static const struct acpi_device_id int340x_thermal_device_ids[] = {
 	{"INT340A"},
 	{"INT340B"},
 	{"INTC1040"},
+	{"INTC1041"},
 	{"INTC1043"},
 	{"INTC1044"},
 	{"INTC1045"},
+	{"INTC1046"},
 	{"INTC1047"},
+	{"INTC1048"},
+	{"INTC1049"},
+	{"INTC1060"},
+	{"INTC1061"},
 	{""},
 };
 

drivers/acpi/event.c

@@ -31,7 +31,7 @@ int acpi_notifier_call_chain(struct acpi_device *dev, u32 type, u32 data)
 	event.type = type;
 	event.data = data;
 	return (blocking_notifier_call_chain(&acpi_chain_head, 0, (void *)&event)
-                        == NOTIFY_BAD) ? -EINVAL : 0;
+			== NOTIFY_BAD) ? -EINVAL : 0;
 }
 EXPORT_SYMBOL(acpi_notifier_call_chain);
 

drivers/acpi/evged.c

@@ -101,7 +101,7 @@ static acpi_status acpi_ged_request_interrupt(struct acpi_resource *ares,
 
 	switch (gsi) {
 	case 0 ... 255:
-		sprintf(ev_name, "_%c%02hhX",
+		sprintf(ev_name, "_%c%02X",
 			trigger == ACPI_EDGE_SENSITIVE ? 'E' : 'L', gsi);
 
 		if (ACPI_SUCCESS(acpi_get_handle(handle, ev_name, &evt_handle)))

drivers/acpi/fan.c

@@ -27,6 +27,7 @@ static const struct acpi_device_id fan_device_ids[] = {
 	{"PNP0C0B", 0},
 	{"INT3404", 0},
 	{"INTC1044", 0},
+	{"INTC1048", 0},
 	{"", 0},
 };
 MODULE_DEVICE_TABLE(acpi, fan_device_ids);

drivers/acpi/internal.h

@@ -134,7 +134,7 @@ int acpi_add_power_resource(acpi_handle handle);
 void acpi_power_add_remove_device(struct acpi_device *adev, bool add);
 int acpi_power_wakeup_list_init(struct list_head *list, int *system_level);
 int acpi_device_sleep_wake(struct acpi_device *dev,
-                           int enable, int sleep_state, int dev_state);
+			   int enable, int sleep_state, int dev_state);
 int acpi_power_get_inferred_state(struct acpi_device *device, int *state);
 int acpi_power_on_resources(struct acpi_device *device, int state);
 int acpi_power_transition(struct acpi_device *device, int state);

drivers/acpi/nfit/core.c

@@ -2175,10 +2175,10 @@ static int acpi_nfit_register_dimms(struct acpi_nfit_desc *acpi_desc)
  * these commands.
  */
 enum nfit_aux_cmds {
-        NFIT_CMD_TRANSLATE_SPA = 5,
-        NFIT_CMD_ARS_INJECT_SET = 7,
-        NFIT_CMD_ARS_INJECT_CLEAR = 8,
-        NFIT_CMD_ARS_INJECT_GET = 9,
+	NFIT_CMD_TRANSLATE_SPA = 5,
+	NFIT_CMD_ARS_INJECT_SET = 7,
+	NFIT_CMD_ARS_INJECT_CLEAR = 8,
+	NFIT_CMD_ARS_INJECT_GET = 9,
 };
 
 static void acpi_nfit_init_dsms(struct acpi_nfit_desc *acpi_desc)
@@ -2632,7 +2632,7 @@ static int acpi_nfit_blk_region_enable(struct nvdimm_bus *nvdimm_bus,
 	nfit_blk->bdw_offset = nfit_mem->bdw->offset;
 	mmio = &nfit_blk->mmio[BDW];
 	mmio->addr.base = devm_nvdimm_memremap(dev, nfit_mem->spa_bdw->address,
-                        nfit_mem->spa_bdw->length, nd_blk_memremap_flags(ndbr));
+			nfit_mem->spa_bdw->length, nd_blk_memremap_flags(ndbr));
 	if (!mmio->addr.base) {
 		dev_dbg(dev, "%s failed to map bdw\n",
 				nvdimm_name(nvdimm));

drivers/acpi/pci_irq.c

@@ -175,7 +175,7 @@ static int acpi_pci_irq_check_entry(acpi_handle handle, struct pci_dev *dev,
 	 * configure the IRQ assigned to this slot|dev|pin.  The 'source_index'
 	 * indicates which resource descriptor in the resource template (of
 	 * the link device) this interrupt is allocated from.
-	 * 
+	 *
 	 * NOTE: Don't query the Link Device for IRQ information at this time
 	 *       because Link Device enumeration may not have occurred yet
 	 *       (e.g. exists somewhere 'below' this _PRT entry in the ACPI

drivers/acpi/pci_link.c

@@ -6,8 +6,8 @@
  *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
  *  Copyright (C) 2002       Dominik Brodowski <devel@brodo.de>
  *
- * TBD: 
- *      1. Support more than one IRQ resource entry per link device (index).
+ * TBD:
+ *	1. Support more than one IRQ resource entry per link device (index).
  *	2. Implement start/stop mechanism and use ACPI Bus Driver facilities
  *	   for IRQ management (e.g. start()->_SRS).
  */
@@ -249,8 +249,8 @@ static int acpi_pci_link_get_current(struct acpi_pci_link *link)
 		}
 	}
 
-	/* 
-	 * Query and parse _CRS to get the current IRQ assignment. 
+	/*
+	 * Query and parse _CRS to get the current IRQ assignment.
 	 */
 
 	status = acpi_walk_resources(link->device->handle, METHOD_NAME__CRS,
@@ -396,7 +396,7 @@ static int acpi_pci_link_set(struct acpi_pci_link *link, int irq)
 /*
  * "acpi_irq_balance" (default in APIC mode) enables ACPI to use PIC Interrupt
  * Link Devices to move the PIRQs around to minimize sharing.
- * 
+ *
  * "acpi_irq_nobalance" (default in PIC mode) tells ACPI not to move any PIC IRQs
  * that the BIOS has already set to active.  This is necessary because
  * ACPI has no automatic means of knowing what ISA IRQs are used.  Note that
@@ -414,7 +414,7 @@ static int acpi_pci_link_set(struct acpi_pci_link *link, int irq)
  *
  * Note that PCI IRQ routers have a list of possible IRQs,
  * which may not include the IRQs this table says are available.
- * 
+ *
  * Since this heuristic can't tell the difference between a link
  * that no device will attach to, vs. a link which may be shared
  * by multiple active devices -- it is not optimal.

drivers/acpi/pci_mcfg.c

@@ -173,7 +173,7 @@ static int pci_mcfg_quirk_matches(struct mcfg_fixup *f, u16 segment,
 {
 	if (!memcmp(f->oem_id, mcfg_oem_id, ACPI_OEM_ID_SIZE) &&
 	    !memcmp(f->oem_table_id, mcfg_oem_table_id,
-	            ACPI_OEM_TABLE_ID_SIZE) &&
+		    ACPI_OEM_TABLE_ID_SIZE) &&
 	    f->oem_revision == mcfg_oem_revision &&
 	    f->segment == segment &&
 	    resource_contains(&f->bus_range, bus_range))

drivers/acpi/power.c

@@ -13,7 +13,7 @@
  * 1. via "Device Specific (D-State) Control"
  * 2. via "Power Resource Control".
  * The code below deals with ACPI Power Resources control.
- * 
+ *
  * An ACPI "power resource object" represents a software controllable power
  * plane, clock plane, or other resource depended on by a device.
  *
@@ -645,7 +645,7 @@ int acpi_power_wakeup_list_init(struct list_head *list, int *system_level_p)
  * -ENODEV if the execution of either _DSW or _PSW has failed
  */
 int acpi_device_sleep_wake(struct acpi_device *dev,
-                           int enable, int sleep_state, int dev_state)
+			   int enable, int sleep_state, int dev_state)
 {
 	union acpi_object in_arg[3];
 	struct acpi_object_list arg_list = { 3, in_arg };
@@ -690,7 +690,7 @@ int acpi_device_sleep_wake(struct acpi_device *dev,
 
 /*
  * Prepare a wakeup device, two steps (Ref ACPI 2.0:P229):
- * 1. Power on the power resources required for the wakeup device 
+ * 1. Power on the power resources required for the wakeup device
  * 2. Execute _DSW (Device Sleep Wake) or (deprecated in ACPI 3.0) _PSW (Power
  *    State Wake) for the device, if present
  */

drivers/acpi/processor_perflib.c

@@ -354,7 +354,7 @@ static int acpi_processor_get_performance_states(struct acpi_processor *pr)
 				  (u32) px->control, (u32) px->status));
 
 		/*
- 		 * Check that ACPI's u64 MHz will be valid as u32 KHz in cpufreq
+		 * Check that ACPI's u64 MHz will be valid as u32 KHz in cpufreq
 		 */
 		if (!px->core_frequency ||
 		    ((u32)(px->core_frequency * 1000) !=
@@ -627,7 +627,7 @@ int acpi_processor_preregister_performance(
 		goto err_ret;
 
 	/*
-	 * Now that we have _PSD data from all CPUs, lets setup P-state 
+	 * Now that we have _PSD data from all CPUs, lets setup P-state
 	 * domain info.
 	 */
 	for_each_possible_cpu(i) {
@@ -693,7 +693,7 @@ int acpi_processor_preregister_performance(
 			if (match_pdomain->domain != pdomain->domain)
 				continue;
 
-			match_pr->performance->shared_type = 
+			match_pr->performance->shared_type =
 					pr->performance->shared_type;
 			cpumask_copy(match_pr->performance->shared_cpu_map,
 				     pr->performance->shared_cpu_map);

drivers/acpi/sbs.c

@@ -366,7 +366,7 @@ static int acpi_battery_get_state(struct acpi_battery *battery)
 					 state_readers[i].mode,
 					 ACPI_SBS_BATTERY,
 					 state_readers[i].command,
-				         (u8 *)battery +
+					 (u8 *)battery +
 						state_readers[i].offset);
 		if (result)
 			goto end;

drivers/acpi/sbshc.c

@@ -176,7 +176,7 @@ int acpi_smbus_write(struct acpi_smb_hc *hc, u8 protocol, u8 address,
 EXPORT_SYMBOL_GPL(acpi_smbus_write);
 
 int acpi_smbus_register_callback(struct acpi_smb_hc *hc,
-			         smbus_alarm_callback callback, void *context)
+				 smbus_alarm_callback callback, void *context)
 {
 	mutex_lock(&hc->lock);
 	hc->callback = callback;

drivers/acpi/sbshc.h

@@ -24,9 +24,9 @@ enum acpi_sbs_device_addr {
 typedef void (*smbus_alarm_callback)(void *context);
 
 extern int acpi_smbus_read(struct acpi_smb_hc *hc, u8 protocol, u8 address,
-	       u8 command, u8 * data);
+		u8 command, u8 *data);
 extern int acpi_smbus_write(struct acpi_smb_hc *hc, u8 protocol, u8 slave_address,
-		u8 command, u8 * data, u8 length);
+		u8 command, u8 *data, u8 length);
 extern int acpi_smbus_register_callback(struct acpi_smb_hc *hc,
-			         smbus_alarm_callback callback, void *context);
+		smbus_alarm_callback callback, void *context);
 extern int acpi_smbus_unregister_callback(struct acpi_smb_hc *hc);

drivers/acpi/scan.c

@@ -1453,7 +1453,7 @@ int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset,
 }
 
 /**
- * acpi_dma_configure - Set-up DMA configuration for the device.
+ * acpi_dma_configure_id - Set-up DMA configuration for the device.
  * @dev: The pointer to the device
  * @attr: device dma attributes
  * @input_id: input device id const value pointer

drivers/acpi/video_detect.c

@@ -178,14 +178,14 @@ static const struct dmi_system_id video_detect_dmi_table[] = {
 		DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201s"),
 		},
 	},
-        {
-         .callback = video_detect_force_video,
-         .ident = "ThinkPad X201T",
-         .matches = {
-                DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-                DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201T"),
-                },
-        },
+	{
+	 .callback = video_detect_force_video,
+	 .ident = "ThinkPad X201T",
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+		DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201T"),
+		},
+	},
 
 	/* The native backlight controls do not work on some older machines */
 	{

drivers/acpi/wakeup.c

@@ -44,7 +44,7 @@ void acpi_enable_wakeup_devices(u8 sleep_state)
 		if (!dev->wakeup.flags.valid
 		    || sleep_state > (u32) dev->wakeup.sleep_state
 		    || !(device_may_wakeup(&dev->dev)
-		        || dev->wakeup.prepare_count))
+			 || dev->wakeup.prepare_count))
 			continue;
 
 		if (device_may_wakeup(&dev->dev))
@@ -69,7 +69,7 @@ void acpi_disable_wakeup_devices(u8 sleep_state)
 		if (!dev->wakeup.flags.valid
 		    || sleep_state > (u32) dev->wakeup.sleep_state
 		    || !(device_may_wakeup(&dev->dev)
-		        || dev->wakeup.prepare_count))
+			 || dev->wakeup.prepare_count))
 			continue;
 
 		acpi_set_gpe_wake_mask(dev->wakeup.gpe_device, dev->wakeup.gpe_number,