Merge tag 'drm-fixes-2018-09-12' of git://anongit.freedesktop.org/drm…

…/drm

Pull drm nouveau fixes from Dave Airlie:
 "I'm sending this separately as it's a bit larger than I generally like
  for one driver, but it does contain a bunch of make my nvidia laptop
  not die (runpm) and a bunch to make my docking station and monitor
  display stuff (mst) fixes.

  Lyude has spent a lot of time on these, and we are putting the fixes
  into distro kernels as well asap, as it helps a bunch of standard
  Lenovo laptops, so I'm fairly happy things are better than they were
  before these patches, but I decided to split them out just for
  clarification"

* tag 'drm-fixes-2018-09-12' of git://anongit.freedesktop.org/drm/drm:
  drm/nouveau/disp/gm200-: enforce identity-mapped SOR assignment for LVDS/eDP panels
  drm/nouveau/disp: fix DP disable race
  drm/nouveau/disp: move eDP panel power handling
  drm/nouveau/disp: remove unused struct member
  drm/nouveau/TBDdevinit: don't fail when PMU/PRE_OS is missing from VBIOS
  drm/nouveau/mmu: don't attempt to dereference vmm without valid instance pointer
  drm/nouveau: fix oops in client init failure path
  drm/nouveau: Fix nouveau_connector_ddc_detect()
  drm/nouveau/drm/nouveau: Don't forget to cancel hpd_work on suspend/unload
  drm/nouveau/drm/nouveau: Prevent handling ACPI HPD events too early
  drm/nouveau: Reset MST branching unit before enabling
  drm/nouveau: Only write DP_MSTM_CTRL when needed
  drm/nouveau: Remove useless poll_enable() call in drm_load()
  drm/nouveau: Remove useless poll_disable() call in switcheroo_set_state()
  drm/nouveau: Remove useless poll_enable() call in switcheroo_set_state()
  drm/nouveau: Fix deadlocks in nouveau_connector_detect()
  drm/nouveau/drm/nouveau: Use pm_runtime_get_noresume() in connector_detect()
  drm/nouveau/drm/nouveau: Fix deadlock with fb_helper with async RPM requests
  drm/nouveau: Remove duplicate poll_enable() in pmops_runtime_suspend()
  drm/nouveau/drm/nouveau: Fix bogus drm_kms_helper_poll_enable() placement

drivers/gpu/drm/nouveau/dispnv50/disp.c

@@ -1123,17 +1123,21 @@ nv50_mstm_enable(struct nv50_mstm *mstm, u8 dpcd, int state)
 	int ret;
 
 	if (dpcd >= 0x12) {
-		ret = drm_dp_dpcd_readb(mstm->mgr.aux, DP_MSTM_CTRL, &dpcd);
+		/* Even if we're enabling MST, start with disabling the
+		 * branching unit to clear any sink-side MST topology state
+		 * that wasn't set by us
+		 */
+		ret = drm_dp_dpcd_writeb(mstm->mgr.aux, DP_MSTM_CTRL, 0);
 		if (ret < 0)
 			return ret;
 
-		dpcd &= ~DP_MST_EN;
-		if (state)
-			dpcd |= DP_MST_EN;
-
-		ret = drm_dp_dpcd_writeb(mstm->mgr.aux, DP_MSTM_CTRL, dpcd);
-		if (ret < 0)
-			return ret;
+		if (state) {
+			/* Now, start initializing */
+			ret = drm_dp_dpcd_writeb(mstm->mgr.aux, DP_MSTM_CTRL,
+						 DP_MST_EN);
+			if (ret < 0)
+				return ret;
+		}
 	}
 
 	return nvif_mthd(disp, 0, &args, sizeof(args));
@@ -1142,31 +1146,58 @@ nv50_mstm_enable(struct nv50_mstm *mstm, u8 dpcd, int state)
 int
 nv50_mstm_detect(struct nv50_mstm *mstm, u8 dpcd[8], int allow)
 {
-	int ret, state = 0;
+	struct drm_dp_aux *aux;
+	int ret;
+	bool old_state, new_state;
+	u8 mstm_ctrl;
 
 	if (!mstm)
 		return 0;
 
-	if (dpcd[0] >= 0x12) {
-		ret = drm_dp_dpcd_readb(mstm->mgr.aux, DP_MSTM_CAP, &dpcd[1]);
+	mutex_lock(&mstm->mgr.lock);
+
+	old_state = mstm->mgr.mst_state;
+	new_state = old_state;
+	aux = mstm->mgr.aux;
+
+	if (old_state) {
+		/* Just check that the MST hub is still as we expect it */
+		ret = drm_dp_dpcd_readb(aux, DP_MSTM_CTRL, &mstm_ctrl);
+		if (ret < 0 || !(mstm_ctrl & DP_MST_EN)) {
+			DRM_DEBUG_KMS("Hub gone, disabling MST topology\n");
+			new_state = false;
+		}
+	} else if (dpcd[0] >= 0x12) {
+		ret = drm_dp_dpcd_readb(aux, DP_MSTM_CAP, &dpcd[1]);
 		if (ret < 0)
-			return ret;
+			goto probe_error;
 
 		if (!(dpcd[1] & DP_MST_CAP))
 			dpcd[0] = 0x11;
 		else
-			state = allow;
+			new_state = allow;
+	}
+
+	if (new_state == old_state) {
+		mutex_unlock(&mstm->mgr.lock);
+		return new_state;
 	}
 
-	ret = nv50_mstm_enable(mstm, dpcd[0], state);
+	ret = nv50_mstm_enable(mstm, dpcd[0], new_state);
 	if (ret)
-		return ret;
+		goto probe_error;
+
+	mutex_unlock(&mstm->mgr.lock);
 
-	ret = drm_dp_mst_topology_mgr_set_mst(&mstm->mgr, state);
+	ret = drm_dp_mst_topology_mgr_set_mst(&mstm->mgr, new_state);
 	if (ret)
 		return nv50_mstm_enable(mstm, dpcd[0], 0);
 
-	return mstm->mgr.mst_state;
+	return new_state;
+
+probe_error:
+	mutex_unlock(&mstm->mgr.lock);
+	return ret;
 }
 
 static void
@@ -2074,7 +2105,7 @@ nv50_disp_atomic_state_alloc(struct drm_device *dev)
 static const struct drm_mode_config_funcs
 nv50_disp_func = {
 	.fb_create = nouveau_user_framebuffer_create,
-	.output_poll_changed = drm_fb_helper_output_poll_changed,
+	.output_poll_changed = nouveau_fbcon_output_poll_changed,
 	.atomic_check = nv50_disp_atomic_check,
 	.atomic_commit = nv50_disp_atomic_commit,
 	.atomic_state_alloc = nv50_disp_atomic_state_alloc,

drivers/gpu/drm/nouveau/nouveau_connector.c

@@ -409,59 +409,45 @@ static struct nouveau_encoder *
 nouveau_connector_ddc_detect(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
-	struct nouveau_connector *nv_connector = nouveau_connector(connector);
-	struct nouveau_drm *drm = nouveau_drm(dev);
-	struct nvkm_gpio *gpio = nvxx_gpio(&drm->client.device);
-	struct nouveau_encoder *nv_encoder = NULL;
+	struct nouveau_encoder *nv_encoder = NULL, *found = NULL;
 	struct drm_encoder *encoder;
-	int i, panel = -ENODEV;
-
-	/* eDP panels need powering on by us (if the VBIOS doesn't default it
-	 * to on) before doing any AUX channel transactions.  LVDS panel power
-	 * is handled by the SOR itself, and not required for LVDS DDC.
-	 */
-	if (nv_connector->type == DCB_CONNECTOR_eDP) {
-		panel = nvkm_gpio_get(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff);
-		if (panel == 0) {
-			nvkm_gpio_set(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff, 1);
-			msleep(300);
-		}
-	}
+	int i, ret;
+	bool switcheroo_ddc = false;
 
 	drm_connector_for_each_possible_encoder(connector, encoder, i) {
 		nv_encoder = nouveau_encoder(encoder);
 
-		if (nv_encoder->dcb->type == DCB_OUTPUT_DP) {
-			int ret = nouveau_dp_detect(nv_encoder);
+		switch (nv_encoder->dcb->type) {
+		case DCB_OUTPUT_DP:
+			ret = nouveau_dp_detect(nv_encoder);
 			if (ret == NOUVEAU_DP_MST)
 				return NULL;
-			if (ret == NOUVEAU_DP_SST)
-				break;
-		} else
-		if ((vga_switcheroo_handler_flags() &
-		     VGA_SWITCHEROO_CAN_SWITCH_DDC) &&
-		    nv_encoder->dcb->type == DCB_OUTPUT_LVDS &&
-		    nv_encoder->i2c) {
-			int ret;
-			vga_switcheroo_lock_ddc(dev->pdev);
-			ret = nvkm_probe_i2c(nv_encoder->i2c, 0x50);
-			vga_switcheroo_unlock_ddc(dev->pdev);
-			if (ret)
+			else if (ret == NOUVEAU_DP_SST)
+				found = nv_encoder;
+
+			break;
+		case DCB_OUTPUT_LVDS:
+			switcheroo_ddc = !!(vga_switcheroo_handler_flags() &
+					    VGA_SWITCHEROO_CAN_SWITCH_DDC);
+		/* fall-through */
+		default:
+			if (!nv_encoder->i2c)
 				break;
-		} else
-		if (nv_encoder->i2c) {
+
+			if (switcheroo_ddc)
+				vga_switcheroo_lock_ddc(dev->pdev);
 			if (nvkm_probe_i2c(nv_encoder->i2c, 0x50))
-				break;
+				found = nv_encoder;
+			if (switcheroo_ddc)
+				vga_switcheroo_unlock_ddc(dev->pdev);
+
+			break;
 		}
+		if (found)
+			break;
 	}
 
-	/* eDP panel not detected, restore panel power GPIO to previous
-	 * state to avoid confusing the SOR for other output types.
-	 */
-	if (!nv_encoder && panel == 0)
-		nvkm_gpio_set(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff, panel);
-
-	return nv_encoder;
+	return found;
 }
 
 static struct nouveau_encoder *
@@ -555,12 +541,16 @@ nouveau_connector_detect(struct drm_connector *connector, bool force)
 		nv_connector->edid = NULL;
 	}
 
-	/* Outputs are only polled while runtime active, so acquiring a
-	 * runtime PM ref here is unnecessary (and would deadlock upon
-	 * runtime suspend because it waits for polling to finish).
+	/* Outputs are only polled while runtime active, so resuming the
+	 * device here is unnecessary (and would deadlock upon runtime suspend
+	 * because it waits for polling to finish). We do however, want to
+	 * prevent the autosuspend timer from elapsing during this operation
+	 * if possible.
 	 */
-	if (!drm_kms_helper_is_poll_worker()) {
-		ret = pm_runtime_get_sync(connector->dev->dev);
+	if (drm_kms_helper_is_poll_worker()) {
+		pm_runtime_get_noresume(dev->dev);
+	} else {
+		ret = pm_runtime_get_sync(dev->dev);
 		if (ret < 0 && ret != -EACCES)
 			return conn_status;
 	}
@@ -638,10 +628,8 @@ nouveau_connector_detect(struct drm_connector *connector, bool force)
 
  out:
 
-	if (!drm_kms_helper_is_poll_worker()) {
-		pm_runtime_mark_last_busy(connector->dev->dev);
-		pm_runtime_put_autosuspend(connector->dev->dev);
-	}
+	pm_runtime_mark_last_busy(dev->dev);
+	pm_runtime_put_autosuspend(dev->dev);
 
 	return conn_status;
 }
@@ -1105,6 +1093,26 @@ nouveau_connector_hotplug(struct nvif_notify *notify)
 	const struct nvif_notify_conn_rep_v0 *rep = notify->data;
 	const char *name = connector->name;
 	struct nouveau_encoder *nv_encoder;
+	int ret;
+
+	ret = pm_runtime_get(drm->dev->dev);
+	if (ret == 0) {
+		/* We can't block here if there's a pending PM request
+		 * running, as we'll deadlock nouveau_display_fini() when it
+		 * calls nvif_put() on our nvif_notify struct. So, simply
+		 * defer the hotplug event until the device finishes resuming
+		 */
+		NV_DEBUG(drm, "Deferring HPD on %s until runtime resume\n",
+			 name);
+		schedule_work(&drm->hpd_work);
+
+		pm_runtime_put_noidle(drm->dev->dev);
+		return NVIF_NOTIFY_KEEP;
+	} else if (ret != 1 && ret != -EACCES) {
+		NV_WARN(drm, "HPD on %s dropped due to RPM failure: %d\n",
+			name, ret);
+		return NVIF_NOTIFY_DROP;
+	}
 
 	if (rep->mask & NVIF_NOTIFY_CONN_V0_IRQ) {
 		NV_DEBUG(drm, "service %s\n", name);
@@ -1122,6 +1130,8 @@ nouveau_connector_hotplug(struct nvif_notify *notify)
 		drm_helper_hpd_irq_event(connector->dev);
 	}
 
+	pm_runtime_mark_last_busy(drm->dev->dev);
+	pm_runtime_put_autosuspend(drm->dev->dev);
 	return NVIF_NOTIFY_KEEP;
 }
 

drivers/gpu/drm/nouveau/nouveau_display.c

@@ -293,7 +293,7 @@ nouveau_user_framebuffer_create(struct drm_device *dev,
 
 static const struct drm_mode_config_funcs nouveau_mode_config_funcs = {
 	.fb_create = nouveau_user_framebuffer_create,
-	.output_poll_changed = drm_fb_helper_output_poll_changed,
+	.output_poll_changed = nouveau_fbcon_output_poll_changed,
 };
 
 
@@ -355,8 +355,6 @@ nouveau_display_hpd_work(struct work_struct *work)
 	pm_runtime_get_sync(drm->dev->dev);
 
 	drm_helper_hpd_irq_event(drm->dev);
-	/* enable polling for external displays */
-	drm_kms_helper_poll_enable(drm->dev);
 
 	pm_runtime_mark_last_busy(drm->dev->dev);
 	pm_runtime_put_sync(drm->dev->dev);
@@ -379,15 +377,29 @@ nouveau_display_acpi_ntfy(struct notifier_block *nb, unsigned long val,
 {
 	struct nouveau_drm *drm = container_of(nb, typeof(*drm), acpi_nb);
 	struct acpi_bus_event *info = data;
+	int ret;
 
 	if (!strcmp(info->device_class, ACPI_VIDEO_CLASS)) {
 		if (info->type == ACPI_VIDEO_NOTIFY_PROBE) {
-			/*
-			 * This may be the only indication we receive of a
-			 * connector hotplug on a runtime suspended GPU,
-			 * schedule hpd_work to check.
-			 */
-			schedule_work(&drm->hpd_work);
+			ret = pm_runtime_get(drm->dev->dev);
+			if (ret == 1 || ret == -EACCES) {
+				/* If the GPU is already awake, or in a state
+				 * where we can't wake it up, it can handle
+				 * it's own hotplug events.
+				 */
+				pm_runtime_put_autosuspend(drm->dev->dev);
+			} else if (ret == 0) {
+				/* This may be the only indication we receive
+				 * of a connector hotplug on a runtime
+				 * suspended GPU, schedule hpd_work to check.
+				 */
+				NV_DEBUG(drm, "ACPI requested connector reprobe\n");
+				schedule_work(&drm->hpd_work);
+				pm_runtime_put_noidle(drm->dev->dev);
+			} else {
+				NV_WARN(drm, "Dropped ACPI reprobe event due to RPM error: %d\n",
+					ret);
+			}
 
 			/* acpi-video should not generate keypresses for this */
 			return NOTIFY_BAD;
@@ -411,6 +423,11 @@ nouveau_display_init(struct drm_device *dev)
 	if (ret)
 		return ret;
 
+	/* enable connector detection and polling for connectors without HPD
+	 * support
+	 */
+	drm_kms_helper_poll_enable(dev);
+
 	/* enable hotplug interrupts */
 	drm_connector_list_iter_begin(dev, &conn_iter);
 	nouveau_for_each_non_mst_connector_iter(connector, &conn_iter) {
@@ -425,7 +442,7 @@ nouveau_display_init(struct drm_device *dev)
 }
 
 void
-nouveau_display_fini(struct drm_device *dev, bool suspend)
+nouveau_display_fini(struct drm_device *dev, bool suspend, bool runtime)
 {
 	struct nouveau_display *disp = nouveau_display(dev);
 	struct nouveau_drm *drm = nouveau_drm(dev);
@@ -450,6 +467,9 @@ nouveau_display_fini(struct drm_device *dev, bool suspend)
 	}
 	drm_connector_list_iter_end(&conn_iter);
 
+	if (!runtime)
+		cancel_work_sync(&drm->hpd_work);
+
 	drm_kms_helper_poll_disable(dev);
 	disp->fini(dev);
 }
@@ -618,11 +638,11 @@ nouveau_display_suspend(struct drm_device *dev, bool runtime)
 			}
 		}
 
-		nouveau_display_fini(dev, true);
+		nouveau_display_fini(dev, true, runtime);
 		return 0;
 	}
 
-	nouveau_display_fini(dev, true);
+	nouveau_display_fini(dev, true, runtime);
 
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
 		struct nouveau_framebuffer *nouveau_fb;

drivers/gpu/drm/nouveau/nouveau_display.h

@@ -62,7 +62,7 @@ nouveau_display(struct drm_device *dev)
 int  nouveau_display_create(struct drm_device *dev);
 void nouveau_display_destroy(struct drm_device *dev);
 int  nouveau_display_init(struct drm_device *dev);
-void nouveau_display_fini(struct drm_device *dev, bool suspend);
+void nouveau_display_fini(struct drm_device *dev, bool suspend, bool runtime);
 int  nouveau_display_suspend(struct drm_device *dev, bool runtime);
 void nouveau_display_resume(struct drm_device *dev, bool runtime);
 int  nouveau_display_vblank_enable(struct drm_device *, unsigned int);