stmmac: add descriptors function for GMAC 4.xx

One of main changes of GMAC 4.xx IP is descriptors management.
-descriptors are only used in ring mode.
-A descriptor is composed of 4 32bits registers (no more extended
 descriptors)
-descriptor mechanism (Tx for example, but it is exactly the same for RX):
-useful registers:
	-DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor
				   ring
	-DMA_CH#_TxDesc_List_Address: start address of the ring
	-DMA_CH#_TxDesc_Tail_Pointer: address of the last
				      descriptor to send + 1.
	-DMA_CH#_TxDesc_Current_App_TxDesc: address of the current
					    descriptor

-The descriptor Tail Pointer register contains the pointer to the
 descriptor address (N). The base address and the current
 descriptor decide the address of the current descriptor that the
 DMA can process. The descriptors up to one location less than the
 one indicated by the descriptor tail pointer (N-1) are owned by
 the DMA. The DMA continues to process the descriptors until the
 following condition occurs:
 "current descriptor pointer == Descriptor Tail pointer"

  Then the DMA goes into suspend mode. The application must perform
  a write to descriptor tail pointer register and update the tail
  pointer to have the following condition and to start a new
      transfer:
  "current descriptor pointer < Descriptor tail pointer"

  The DMA automatically wraps around the base address when the end
  of ring is reached.

-New features are available on IP:
-TSO (TCP Segmentation Offload) for TX only
-Split header: to have header and payload in 2 different buffers

Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/stmicro/stmmac/Makefile

@@ -2,7 +2,8 @@ obj-$(CONFIG_STMMAC_ETH) += stmmac.o
 stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o ring_mode.o	\
 	      chain_mode.o dwmac_lib.o dwmac1000_core.o dwmac1000_dma.o	\
 	      dwmac100_core.o dwmac100_dma.o enh_desc.o norm_desc.o	\
-	      mmc_core.o stmmac_hwtstamp.o stmmac_ptp.o $(stmmac-y)
+	      mmc_core.o stmmac_hwtstamp.o stmmac_ptp.o dwmac4_descs.o	\
+	      $(stmmac-y)
 
 # Ordering matters. Generic driver must be last.
 obj-$(CONFIG_STMMAC_PLATFORM)	+= stmmac-platform.o

drivers/net/ethernet/stmicro/stmmac/common.h

@@ -243,6 +243,7 @@ enum rx_frame_status {
 	csum_none = 0x2,
 	llc_snap = 0x4,
 	dma_own = 0x8,
+	rx_not_ls = 0x10,
 };
 
 /* Tx status */
@@ -348,6 +349,10 @@ struct stmmac_desc_ops {
 	void (*prepare_tx_desc) (struct dma_desc *p, int is_fs, int len,
 				 bool csum_flag, int mode, bool tx_own,
 				 bool ls);
+	void (*prepare_tso_tx_desc)(struct dma_desc *p, int is_fs, int len1,
+				    int len2, bool tx_own, bool ls,
+				    unsigned int tcphdrlen,
+				    unsigned int tcppayloadlen);
 	/* Set/get the owner of the descriptor */
 	void (*set_tx_owner) (struct dma_desc *p);
 	int (*get_tx_owner) (struct dma_desc *p);
@@ -382,6 +387,8 @@ struct stmmac_desc_ops {
 	int (*get_rx_timestamp_status) (void *desc, u32 ats);
 	/* Display ring */
 	void (*display_ring)(void *head, unsigned int size, bool rx);
+	/* set MSS via context descriptor */
+	void (*set_mss)(struct dma_desc *p, unsigned int mss);
 };
 
 extern const struct stmmac_desc_ops enh_desc_ops;