Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/ker…

…nel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "This week's arm-soc fixes:

   - A set of of OMAP patches that we had missed Tony's pull request of:
     * Reset fix for am43xx
     * Proper OPP table for omap5
     * Fix for SoC detection of one of the DRA7 SoCs
     * hwmod updates to get SATA and OCP to work on omap5 (drivers
       merged in 3.16)
     * ... plus a handful of smaller fixes
   - sunxi needed to re-add machine specific restart code that was
     removed in anticipation of a watchdog driver being merged for 3.16,
     and it didn't make it in.
   - Marvell fixes for PCIe on SMP and a big-endian fix.
   - A trivial defconfig update to make my capri test board boot with
     bcm_defconfig again.

  ... and a couple of MAINTAINERS updates, one to claim new Keystone
  drivers that have been merged, and one to merge MXS and i.MX (both
  Freescale platforms).

  The largest diffs come from the hwmod code for omap5 and the re-add of
  the restart code on sunxi.  The hwmod stuff is quite late at this
  point but it slipped through cracks repeatedly while coming up the
  maintainer chain and only affects the one SoC so risk is low"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  MAINTAINERS: Add few more Keystone drivers
  MAINTAINERS: merge MXS entry into IMX one
  ARM: sunxi: Reintroduce the restart code for A10/A20 SoCs
  ARM: mvebu: fix cpuidle implementation to work on big-endian systems
  ARM: mvebu: update L2/PCIe deadlock workaround after L2CC cleanup
  ARM: mvebu: move Armada 375 external abort logic as a quirk
  ARM: bcm: Fix bcm and multi_v7 defconfigs
  ARM: dts: dra7-evm: remove interrupt binding
  ARM: OMAP2+: Fix parser-bug in platform muxing code
  ARM: DTS: dra7/dra7xx-clocks: ATL related changes
  ARM: OMAP2+: drop unused function
  ARM: dts: am43x-epos-evm: Add Missing cpsw-phy-sel for am43x-epos-evm
  ARM: dts: omap5: Update CPU OPP table as per final production Manual
  ARM: DRA722: add detection of SoC information
  ARM: dts: Enable twl4030 off-idle configuration for selected omaps
  ARM: OMAP5: hwmod: Add ocp2scp3 and sata hwmods
  ARM: OMAP2+: hwmod: Change hardreset soc_ops for AM43XX

MAINTAINERS

@@ -943,16 +943,10 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git
 F:	arch/arm/mach-imx/
+F:	arch/arm/mach-mxs/
 F:	arch/arm/boot/dts/imx*
 F:	arch/arm/configs/imx*_defconfig
 
-ARM/FREESCALE MXS ARM ARCHITECTURE
-M:	Shawn Guo <shawn.guo@linaro.org>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
-T:	git git://git.linaro.org/people/shawnguo/linux-2.6.git
-F:	arch/arm/mach-mxs/
-
 ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1052,9 +1046,33 @@ M:	Santosh Shilimkar <santosh.shilimkar@ti.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-keystone/
-F:	drivers/clk/keystone/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git
 
+ARM/TEXAS INSTRUMENT KEYSTONE CLOCK FRAMEWORK
+M:	Santosh Shilimkar <santosh.shilimkar@ti.com>
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+F:	drivers/clk/keystone/
+
+ARM/TEXAS INSTRUMENT KEYSTONE ClOCKSOURCE
+M:	Santosh Shilimkar <santosh.shilimkar@ti.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+F:	drivers/clocksource/timer-keystone.c
+
+ARM/TEXAS INSTRUMENT KEYSTONE RESET DRIVER
+M:	Santosh Shilimkar <santosh.shilimkar@ti.com>
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+F:	drivers/power/reset/keystone-reset.c
+
+ARM/TEXAS INSTRUMENT AEMIF/EMIF DRIVERS
+M:	Santosh Shilimkar <santosh.shilimkar@ti.com>
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+F:	drivers/memory/*emif*
+
 ARM/LOGICPD PXA270 MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)

arch/arm/boot/dts/am43x-epos-evm.dts

@@ -319,6 +319,10 @@
 	phy-mode = "rmii";
 };
 
+&phy_sel {
+	rmii-clock-ext;
+};
+
 &i2c0 {
 	status = "okay";
 	pinctrl-names = "default";

arch/arm/boot/dts/dra7.dtsi

@@ -773,7 +773,6 @@
 			clocks = <&qspi_gfclk_div>;
 			clock-names = "fck";
 			num-cs = <4>;
-			interrupts = <0 343 0x4>;
 			status = "disabled";
 		};
 
@@ -984,6 +983,17 @@
 			#size-cells = <1>;
 			status = "disabled";
 		};
+
+		atl: atl@4843c000 {
+			compatible = "ti,dra7-atl";
+			reg = <0x4843c000 0x3ff>;
+			ti,hwmods = "atl";
+			ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
+					     <&atl_clkin2_ck>, <&atl_clkin3_ck>;
+			clocks = <&atl_gfclk_mux>;
+			clock-names = "fck";
+			status = "disabled";
+		};
 	};
 };
 

arch/arm/boot/dts/dra7xx-clocks.dtsi

@@ -10,26 +10,26 @@
 &cm_core_aon_clocks {
 	atl_clkin0_ck: atl_clkin0_ck {
 		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
+		compatible = "ti,dra7-atl-clock";
+		clocks = <&atl_gfclk_mux>;
 	};
 
 	atl_clkin1_ck: atl_clkin1_ck {
 		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
+		compatible = "ti,dra7-atl-clock";
+		clocks = <&atl_gfclk_mux>;
 	};
 
 	atl_clkin2_ck: atl_clkin2_ck {
 		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
+		compatible = "ti,dra7-atl-clock";
+		clocks = <&atl_gfclk_mux>;
 	};
 
 	atl_clkin3_ck: atl_clkin3_ck {
 		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
+		compatible = "ti,dra7-atl-clock";
+		clocks = <&atl_gfclk_mux>;
 	};
 
 	hdmi_clkin_ck: hdmi_clkin_ck {

arch/arm/boot/dts/omap3-beagle-xm.dts

@@ -251,6 +251,11 @@
 			codec {
 			};
 		};
+
+		twl_power: power {
+			compatible = "ti,twl4030-power-beagleboard-xm", "ti,twl4030-power-idle-osc-off";
+			ti,use_poweroff;
+		};
 	};
 };
 
@@ -301,6 +306,7 @@
 };
 
 &uart3 {
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins>;
 };

arch/arm/boot/dts/omap3-evm-common.dtsi

@@ -50,6 +50,13 @@
 	gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;
 };
 
+&twl {
+	twl_power: power {
+		compatible = "ti,twl4030-power-omap3-evm", "ti,twl4030-power-idle";
+		ti,use_poweroff;
+	};
+};
+
 &i2c2 {
 	clock-frequency = <400000>;
 };

arch/arm/boot/dts/omap3-n900.dts

@@ -351,6 +351,11 @@
 		compatible = "ti,twl4030-audio";
 		ti,enable-vibra = <1>;
 	};
+
+	twl_power: power {
+		compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
+		ti,use_poweroff;
+	};
 };
 
 &twl_keypad {

arch/arm/boot/dts/omap5.dtsi

@@ -45,7 +45,6 @@
 
 			operating-points = <
 				/* kHz    uV */
-				500000  880000
 				1000000 1060000
 				1500000 1250000
 			>;

arch/arm/configs/bcm_defconfig

@@ -94,10 +94,10 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
 CONFIG_MMC_BLOCK_MINORS=32
 CONFIG_MMC_TEST=y
 CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_BCM_KONA=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y

arch/arm/configs/multi_v7_defconfig

@@ -223,12 +223,12 @@ CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_RESET_SUN6I=y
 CONFIG_SENSORS_LM90=y
 CONFIG_THERMAL=y
-CONFIG_DOVE_THERMAL=y
 CONFIG_ARMADA_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_ORION_WATCHDOG=y
 CONFIG_SUNXI_WATCHDOG=y
 CONFIG_MFD_AS3722=y
+CONFIG_MFD_BCM590XX=y
 CONFIG_MFD_CROS_EC=y
 CONFIG_MFD_CROS_EC_SPI=y
 CONFIG_MFD_MAX8907=y
@@ -240,6 +240,7 @@ CONFIG_MFD_TPS65910=y
 CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
 CONFIG_REGULATOR_AB8500=y
 CONFIG_REGULATOR_AS3722=y
+CONFIG_REGULATOR_BCM590XX=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_MAX8907=y
 CONFIG_REGULATOR_PALMAS=y

arch/arm/mach-mvebu/Makefile

@@ -7,7 +7,7 @@ CFLAGS_pmsu.o			:= -march=armv7-a
 obj-y				 += system-controller.o mvebu-soc-id.o
 
 ifeq ($(CONFIG_MACH_MVEBU_V7),y)
-obj-y				 += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o
+obj-y				 += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o pmsu_ll.o
 obj-$(CONFIG_SMP)		 += platsmp.o headsmp.o platsmp-a9.o headsmp-a9.o
 obj-$(CONFIG_HOTPLUG_CPU)	 += hotplug.o
 endif

arch/arm/mach-mvebu/board-v7.c

@@ -23,6 +23,7 @@
 #include <linux/mbus.h>
 #include <linux/signal.h>
 #include <linux/slab.h>
+#include <linux/irqchip.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -71,17 +72,23 @@ static int armada_375_external_abort_wa(unsigned long addr, unsigned int fsr,
 	return 1;
 }
 
-static void __init mvebu_timer_and_clk_init(void)
+static void __init mvebu_init_irq(void)
 {
-	of_clk_init(NULL);
-	clocksource_of_init();
+	irqchip_init();
 	mvebu_scu_enable();
 	coherency_init();
 	BUG_ON(mvebu_mbus_dt_init(coherency_available()));
+}
+
+static void __init external_abort_quirk(void)
+{
+	u32 dev, rev;
 
-	if (of_machine_is_compatible("marvell,armada375"))
-		hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0,
-				"imprecise external abort");
+	if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > ARMADA_375_Z1_REV)
+		return;
+
+	hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0,
+			"imprecise external abort");
 }
 
 static void __init i2c_quirk(void)
@@ -169,8 +176,10 @@ static void __init mvebu_dt_init(void)
 {
 	if (of_machine_is_compatible("plathome,openblocks-ax3-4"))
 		i2c_quirk();
-	if (of_machine_is_compatible("marvell,a375-db"))
+	if (of_machine_is_compatible("marvell,a375-db")) {
+		external_abort_quirk();
 		thermal_quirk();
+	}
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
@@ -185,7 +194,7 @@ DT_MACHINE_START(ARMADA_370_XP_DT, "Marvell Armada 370/XP (Device Tree)")
 	.l2c_aux_mask	= ~0,
 	.smp		= smp_ops(armada_xp_smp_ops),
 	.init_machine	= mvebu_dt_init,
-	.init_time	= mvebu_timer_and_clk_init,
+	.init_irq       = mvebu_init_irq,
 	.restart	= mvebu_restart,
 	.dt_compat	= armada_370_xp_dt_compat,
 MACHINE_END
@@ -198,7 +207,7 @@ static const char * const armada_375_dt_compat[] = {
 DT_MACHINE_START(ARMADA_375_DT, "Marvell Armada 375 (Device Tree)")
 	.l2c_aux_val	= 0,
 	.l2c_aux_mask	= ~0,
-	.init_time	= mvebu_timer_and_clk_init,
+	.init_irq       = mvebu_init_irq,
 	.init_machine	= mvebu_dt_init,
 	.restart	= mvebu_restart,
 	.dt_compat	= armada_375_dt_compat,
@@ -213,7 +222,7 @@ static const char * const armada_38x_dt_compat[] = {
 DT_MACHINE_START(ARMADA_38X_DT, "Marvell Armada 380/385 (Device Tree)")
 	.l2c_aux_val	= 0,
 	.l2c_aux_mask	= ~0,
-	.init_time	= mvebu_timer_and_clk_init,
+	.init_irq       = mvebu_init_irq,
 	.restart	= mvebu_restart,
 	.dt_compat	= armada_38x_dt_compat,
 MACHINE_END

arch/arm/mach-mvebu/pmsu.c

@@ -66,6 +66,8 @@ static void __iomem *pmsu_mp_base;
 extern void ll_disable_coherency(void);
 extern void ll_enable_coherency(void);
 
+extern void armada_370_xp_cpu_resume(void);
+
 static struct platform_device armada_xp_cpuidle_device = {
 	.name = "cpuidle-armada-370-xp",
 };
@@ -140,13 +142,6 @@ static void armada_370_xp_pmsu_enable_l2_powerdown_onidle(void)
 	writel(reg, pmsu_mp_base + L2C_NFABRIC_PM_CTL);
 }
 
-static void armada_370_xp_cpu_resume(void)
-{
-	asm volatile("bl    ll_add_cpu_to_smp_group\n\t"
-		     "bl    ll_enable_coherency\n\t"
-		     "b	    cpu_resume\n\t");
-}
-
 /* No locking is needed because we only access per-CPU registers */
 void armada_370_xp_pmsu_idle_prepare(bool deepidle)
 {

arch/arm/mach-mvebu/pmsu_ll.S

@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2014 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Gregory Clement <gregory.clement@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * This is the entry point through which CPUs exiting cpuidle deep
+ * idle state are going.
+ */
+ENTRY(armada_370_xp_cpu_resume)
+ARM_BE8(setend	be )			@ go BE8 if entered LE
+	bl	ll_add_cpu_to_smp_group
+	bl	ll_enable_coherency
+	b	cpu_resume
+ENDPROC(armada_370_xp_cpu_resume)
+

arch/arm/mach-omap2/Makefile

@@ -110,14 +110,16 @@ obj-y					+= prm_common.o cm_common.o
 obj-$(CONFIG_ARCH_OMAP2)		+= prm2xxx_3xxx.o prm2xxx.o cm2xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= prm2xxx_3xxx.o prm3xxx.o cm3xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= vc3xxx_data.o vp3xxx_data.o
-obj-$(CONFIG_SOC_AM33XX)		+= prm33xx.o cm33xx.o
 omap-prcm-4-5-common			=  cminst44xx.o cm44xx.o prm44xx.o \
 					   prcm_mpu44xx.o prminst44xx.o \
 					   vc44xx_data.o vp44xx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-prcm-4-5-common)
 obj-$(CONFIG_SOC_OMAP5)			+= $(omap-prcm-4-5-common)
 obj-$(CONFIG_SOC_DRA7XX)		+= $(omap-prcm-4-5-common)
-obj-$(CONFIG_SOC_AM43XX)		+= $(omap-prcm-4-5-common)
+am33xx-43xx-prcm-common			+= prm33xx.o cm33xx.o
+obj-$(CONFIG_SOC_AM33XX)		+= $(am33xx-43xx-prcm-common)
+obj-$(CONFIG_SOC_AM43XX)		+= $(omap-prcm-4-5-common) \
+					   $(am33xx-43xx-prcm-common)
 
 # OMAP voltage domains
 voltagedomain-common			:= voltage.o vc.o vp.o

arch/arm/mach-omap2/cm33xx.h

@@ -380,7 +380,7 @@ void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs);
 void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs);
 void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs);
 
-#ifdef CONFIG_SOC_AM33XX
+#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
 extern int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs,
 					u16 clkctrl_offs);
 extern void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs,

arch/arm/mach-omap2/common.h

@@ -248,7 +248,6 @@ static inline void __iomem *omap4_get_scu_base(void)
 }
 #endif
 
-extern void __init gic_init_irq(void);
 extern void gic_dist_disable(void);
 extern void gic_dist_enable(void);
 extern bool gic_dist_disabled(void);