Skip to content

Commit

Permalink
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/…
Browse files Browse the repository at this point in the history
…scottwood/linux.git

Freescale updates from Scott (27 commits):

  "Highlights include DMA32 zone support (SATA, USB, etc now works on 64-bit
   FSL kernels), MSI changes, 8xx optimizations and cleanup, t104x board
   support, and PrPMC PCI enumeration."
  • Loading branch information
Michael Ellerman committed Oct 3, 2014
2 parents d0b7abb + cb0446c commit 75d43b2
Show file tree
Hide file tree
Showing 27 changed files with 610 additions and 204 deletions.
27 changes: 27 additions & 0 deletions Documentation/devicetree/bindings/pci/fsl,pci.txt
Original file line number Diff line number Diff line change
@@ -0,0 +1,27 @@
* Bus Enumeration by Freescale PCI-X Agent

Typically any Freescale PCI-X bridge hardware strapped into Agent mode
is prevented from enumerating the bus. The PrPMC form-factor requires
all mezzanines to be PCI-X Agents, but one per system may still
enumerate the bus.

The property defined below will allow a PCI-X bridge to be used for bus
enumeration despite being strapped into Agent mode.

Required properties:
- fsl,pci-agent-force-enum : There is no value associated with this
property. The property itself is treated as a boolean.

Example:

/* PCI-X bridge known to be PrPMC Monarch */
pci0: pci@ef008000 {
fsl,pci-agent-force-enum;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
device_type = "pci";
...
...
};
4 changes: 4 additions & 0 deletions arch/powerpc/Kconfig
Original file line number Diff line number Diff line change
Expand Up @@ -288,6 +288,10 @@ config PPC_EMULATE_SSTEP
bool
default y if KPROBES || UPROBES || XMON || HAVE_HW_BREAKPOINT

config ZONE_DMA32
bool
default y if PPC64

source "init/Kconfig"

source "kernel/Kconfig.freezer"
Expand Down
4 changes: 2 additions & 2 deletions arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
Original file line number Diff line number Diff line change
Expand Up @@ -410,15 +410,15 @@
/include/ "qoriq-gpio-3.dtsi"
/include/ "qoriq-usb2-mph-0.dtsi"
usb0: usb@210000 {
compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph";
compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
fsl,iommu-parent = <&pamu1>;
fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
phy_type = "utmi";
port0;
};
/include/ "qoriq-usb2-dr-0.dtsi"
usb1: usb@211000 {
compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr";
compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
fsl,iommu-parent = <&pamu1>;
fsl,liodn-reg = <&guts 0x524>; /* USB1LIODNR */
dr_mode = "host";
Expand Down
4 changes: 2 additions & 2 deletions arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
Original file line number Diff line number Diff line change
Expand Up @@ -498,13 +498,13 @@
/include/ "qoriq-gpio-3.dtsi"
/include/ "qoriq-usb2-mph-0.dtsi"
usb0: usb@210000 {
compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph";
compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
phy_type = "utmi";
port0;
};
/include/ "qoriq-usb2-dr-0.dtsi"
usb1: usb@211000 {
compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr";
compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
dr_mode = "host";
phy_type = "utmi";
};
Expand Down
48 changes: 48 additions & 0 deletions arch/powerpc/boot/dts/t1040rdb.dts
Original file line number Diff line number Diff line change
@@ -0,0 +1,48 @@
/*
* T1040RDB Device Tree Source
*
* Copyright 2014 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/

/include/ "fsl/t104xsi-pre.dtsi"
/include/ "t104xrdb.dtsi"

/ {
model = "fsl,T1040RDB";
compatible = "fsl,T1040RDB";
ifc: localbus@ffe124000 {
cpld@3,0 {
compatible = "fsl,t1040rdb-cpld";
};
};
};

/include/ "fsl/t1040si-post.dtsi"
48 changes: 48 additions & 0 deletions arch/powerpc/boot/dts/t1042rdb.dts
Original file line number Diff line number Diff line change
@@ -0,0 +1,48 @@
/*
* T1042RDB Device Tree Source
*
* Copyright 2014 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/

/include/ "fsl/t104xsi-pre.dtsi"
/include/ "t104xrdb.dtsi"

/ {
model = "fsl,T1042RDB";
compatible = "fsl,T1042RDB";
ifc: localbus@ffe124000 {
cpld@3,0 {
compatible = "fsl,t1042rdb-cpld";
};
};
};

/include/ "fsl/t1042si-post.dtsi"
57 changes: 57 additions & 0 deletions arch/powerpc/boot/dts/t1042rdb_pi.dts
Original file line number Diff line number Diff line change
@@ -0,0 +1,57 @@
/*
* T1042RDB_PI Device Tree Source
*
* Copyright 2014 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/

/include/ "fsl/t104xsi-pre.dtsi"
/include/ "t104xrdb.dtsi"

/ {
model = "fsl,T1042RDB_PI";
compatible = "fsl,T1042RDB_PI";
ifc: localbus@ffe124000 {
cpld@3,0 {
compatible = "fsl,t1042rdb_pi-cpld";
};
};
soc: soc@ffe000000 {
i2c@118000 {
rtc@68 {
compatible = "dallas,ds1337";
reg = <0x68>;
interrupts = <0x2 0x1 0 0>;
};
};
};
};

/include/ "fsl/t1042si-post.dtsi"
156 changes: 156 additions & 0 deletions arch/powerpc/boot/dts/t104xrdb.dtsi
Original file line number Diff line number Diff line change
@@ -0,0 +1,156 @@
/*
* T1040RDB/T1042RDB Device Tree Source
*
* Copyright 2014 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/

/ {

ifc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x2000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
2 0 0xf 0xff800000 0x00010000
3 0 0xf 0xffdf0000 0x00008000>;

nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};

nand@2,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,ifc-nand";
reg = <0x2 0x0 0x10000>;
};

cpld@3,0 {
reg = <3 0 0x300>;
};
};

memory {
device_type = "memory";
};

dcsr: dcsr@f00000000 {
ranges = <0x00000000 0xf 0x00000000 0x01072000>;
};

soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;

spi@110000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q512a";
reg = <0>;
spi-max-frequency = <10000000>; /* input clock */
};
};

i2c@118100 {
pca9546@77 {
compatible = "nxp,pca9546";
reg = <0x77>;
#address-cells = <1>;
#size-cells = <0>;
};
};

};

pci0: pcie@ffe240000 {
reg = <0xf 0xfe240000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x10000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x10000000

0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};

pci1: pcie@ffe250000 {
reg = <0xf 0xfe250000 0 0x10000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x10000000

0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};

pci2: pcie@ffe260000 {
reg = <0xf 0xfe260000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x10000000

0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};

pci3: pcie@ffe270000 {
reg = <0xf 0xfe270000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x10000000

0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
};
2 changes: 2 additions & 0 deletions arch/powerpc/configs/corenet32_smp_defconfig
Original file line number Diff line number Diff line change
Expand Up @@ -165,6 +165,8 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=m
CONFIG_MAGIC_SYSRQ=y
Expand Down
Loading

0 comments on commit 75d43b2

Please sign in to comment.