Merge branch 'linus' into x86/asm, to resolve conflicts

Conflicts:
	tools/testing/selftests/x86/Makefile
	tools/testing/selftests/x86/run_x86_tests.sh

CREDITS

@@ -3709,6 +3709,13 @@ N: Dirk Verworner
 D: Co-author of German book ``Linux-Kernel-Programmierung''
 D: Co-founder of Berlin Linux User Group
 
+N: Andrew Victor
+E: linux@maxim.org.za
+W: http://maxim.org.za/at91_26.html
+D: First maintainer of Atmel ARM-based SoC, aka AT91
+D: Introduced support for at91rm9200, the first chip of AT91 family
+S: South Africa
+
 N: Riku Voipio
 E: riku.voipio@iki.fi
 D: Author of PCA9532 LED and Fintek f75375s hwmon driver

Documentation/devicetree/bindings/arm/omap/l3-noc.txt

@@ -6,6 +6,7 @@ provided by Arteris.
 Required properties:
 - compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
                Should be "ti,omap4-l3-noc" for OMAP4 family
+               Should be "ti,omap5-l3-noc" for OMAP5 family
 	       Should be "ti,dra7-l3-noc" for DRA7 family
                Should be "ti,am4372-l3-noc" for AM43 family
 - reg:	Contains L3 register address range for each noc domain.

Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt

@@ -38,7 +38,7 @@ dma_apbx: dma-apbx@80024000 {
 		      80 81 68 69
 		      70 71 72 73
 		      74 75 76 77>;
-	interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
+	interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
 			  "saif0", "saif1", "i2c0", "i2c1",
 			  "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
 			  "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";

Documentation/serial/tty.txt

@@ -198,6 +198,9 @@ TTY_IO_ERROR		If set, causes all subsequent userspace read/write
 
 TTY_OTHER_CLOSED	Device is a pty and the other side has closed.
 
+TTY_OTHER_DONE		Device is a pty and the other side has closed and
+			all pending input processing has been completed.
+
 TTY_NO_WRITE_SPLIT	Prevent driver from splitting up writes into
 			smaller chunks.
 

MAINTAINERS

@@ -892,11 +892,10 @@ S:	Maintained
 F:	arch/arm/mach-alpine/
 
 ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES
-M:	Andrew Victor <linux@maxim.org.za>
 M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Alexandre Belloni <alexandre.belloni@free-electrons.com>
 M:	Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://maxim.org.za/at91_26.html
 W:	http://www.linux4sam.org
 S:	Supported
 F:	arch/arm/mach-at91/
@@ -975,7 +974,7 @@ S:	Maintained
 ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE
 M:	Hans Ulli Kroll <ulli.kroll@googlemail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-T:	git git://git.berlios.de/gemini-board
+T:	git git://github.com/ulli-kroll/linux.git
 S:	Maintained
 F:	arch/arm/mach-gemini/
 
@@ -990,6 +989,12 @@ F:	drivers/clocksource/timer-prima2.c
 F:	drivers/clocksource/timer-atlas7.c
 N:	[^a-z]sirf
 
+ARM/CONEXANT DIGICOLOR MACHINE SUPPORT
+M:	Baruch Siach <baruch@tkos.co.il>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+N:	digicolor
+
 ARM/EBSA110 MACHINE SUPPORT
 M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1188,7 +1193,7 @@ ARM/MAGICIAN MACHINE SUPPORT
 M:	Philipp Zabel <philipp.zabel@gmail.com>
 S:	Maintained
 
-ARM/Marvell Armada 370 and Armada XP SOC support
+ARM/Marvell Kirkwood and Armada 370, 375, 38x, XP SOC support
 M:	Jason Cooper <jason@lakedaemon.net>
 M:	Andrew Lunn <andrew@lunn.ch>
 M:	Gregory Clement <gregory.clement@free-electrons.com>
@@ -1197,12 +1202,17 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-mvebu/
 F:	drivers/rtc/rtc-armada38x.c
+F:	arch/arm/boot/dts/armada*
+F:	arch/arm/boot/dts/kirkwood*
+
 
 ARM/Marvell Berlin SoC support
 M:	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-berlin/
+F:	arch/arm/boot/dts/berlin*
+
 
 ARM/Marvell Dove/MV78xx0/Orion SOC support
 M:	Jason Cooper <jason@lakedaemon.net>
@@ -1215,6 +1225,9 @@ F:	arch/arm/mach-dove/
 F:	arch/arm/mach-mv78xx0/
 F:	arch/arm/mach-orion5x/
 F:	arch/arm/plat-orion/
+F:	arch/arm/boot/dts/dove*
+F:	arch/arm/boot/dts/orion5x*
+
 
 ARM/Orion SoC/Technologic Systems TS-78xx platform support
 M:	Alexander Clouter <alex@digriz.org.uk>
@@ -1366,6 +1379,7 @@ N:	rockchip
 
 ARM/SAMSUNG EXYNOS ARM ARCHITECTURES
 M:	Kukjin Kim <kgene@kernel.org>
+M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 S:	Maintained
@@ -1439,9 +1453,10 @@ ARM/SOCFPGA ARCHITECTURE
 M:	Dinh Nguyen <dinguyen@opensource.altera.com>
 S:	Maintained
 F:	arch/arm/mach-socfpga/
+F:	arch/arm/boot/dts/socfpga*
+F:	arch/arm/configs/socfpga_defconfig
 W:	http://www.rocketboards.org
-T:	git://git.rocketboards.org/linux-socfpga.git
-T:	git://git.rocketboards.org/linux-socfpga-next.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git
 
 ARM/SOCFPGA CLOCK FRAMEWORK SUPPORT
 M:	Dinh Nguyen <dinguyen@opensource.altera.com>
@@ -1929,7 +1944,7 @@ S:	Maintained
 F:	drivers/net/wireless/b43legacy/
 
 BACKLIGHT CLASS/SUBSYSTEM
-M:	Jingoo Han <jg1.han@samsung.com>
+M:	Jingoo Han <jingoohan1@gmail.com>
 M:	Lee Jones <lee.jones@linaro.org>
 S:	Maintained
 F:	drivers/video/backlight/
@@ -2116,8 +2131,9 @@ S:	Supported
 F:	drivers/net/ethernet/broadcom/bnx2x/
 
 BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE
-M:	Christian Daudt <bcm@fixthebug.org>
 M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Ray Jui <rjui@broadcom.com>
+M:	Scott Branden <sbranden@broadcom.com>
 L:	bcm-kernel-feedback-list@broadcom.com
 T:	git git://github.com/broadcom/mach-bcm
 S:	Maintained
@@ -2168,7 +2184,6 @@ S:	Maintained
 F:	drivers/usb/gadget/udc/bcm63xx_udc.*
 
 BROADCOM BCM7XXX ARM ARCHITECTURE
-M:	Marc Carino <marc.ceeeee@gmail.com>
 M:	Brian Norris <computersforpeace@gmail.com>
 M:	Gregory Fong <gregory.0xf0@gmail.com>
 M:	Florian Fainelli <f.fainelli@gmail.com>
@@ -3912,7 +3927,7 @@ F:	drivers/extcon/
 F:	Documentation/extcon/
 
 EXYNOS DP DRIVER
-M:	Jingoo Han <jg1.han@samsung.com>
+M:	Jingoo Han <jingoohan1@gmail.com>
 L:	dri-devel@lists.freedesktop.org
 S:	Maintained
 F:	drivers/gpu/drm/exynos/exynos_dp*
@@ -4371,11 +4386,10 @@ F:	fs/gfs2/
 F:	include/uapi/linux/gfs2_ondisk.h
 
 GIGASET ISDN DRIVERS
-M:	Hansjoerg Lipp <hjlipp@web.de>
-M:	Tilman Schmidt <tilman@imap.cc>
+M:	Paul Bolle <pebolle@tiscali.nl>
 L:	gigaset307x-common@lists.sourceforge.net
 W:	http://gigaset307x.sourceforge.net/
-S:	Maintained
+S:	Odd Fixes
 F:	Documentation/isdn/README.gigaset
 F:	drivers/isdn/gigaset/
 F:	include/uapi/linux/gigaset_dev.h
@@ -5048,7 +5062,7 @@ M:	Hal Rosenstock <hal.rosenstock@gmail.com>
 L:	linux-rdma@vger.kernel.org
 W:	http://www.openfabrics.org/
 Q:	http://patchwork.kernel.org/project/linux-rdma/list/
-T:	git git://github.com/dledford/linux.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma.git
 S:	Supported
 F:	Documentation/infiniband/
 F:	drivers/infiniband/
@@ -6953,6 +6967,17 @@ T:	git git://git.rocketboards.org/linux-socfpga-next.git
 S:	Maintained
 F:	arch/nios2/
 
+NOKIA N900 POWER SUPPLY DRIVERS
+M:	Pali Rohár <pali.rohar@gmail.com>
+S:	Maintained
+F:	include/linux/power/bq2415x_charger.h
+F:	include/linux/power/bq27x00_battery.h
+F:	include/linux/power/isp1704_charger.h
+F:	drivers/power/bq2415x_charger.c
+F:	drivers/power/bq27x00_battery.c
+F:	drivers/power/isp1704_charger.c
+F:	drivers/power/rx51_battery.c
+
 NTB DRIVER
 M:	Jon Mason <jdmason@kudzu.us>
 M:	Dave Jiang <dave.jiang@intel.com>
@@ -7541,15 +7566,15 @@ S:	Maintained
 F:	drivers/pci/host/*rcar*
 
 PCI DRIVER FOR SAMSUNG EXYNOS
-M:	Jingoo Han <jg1.han@samsung.com>
+M:	Jingoo Han <jingoohan1@gmail.com>
 L:	linux-pci@vger.kernel.org
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/pci/host/pci-exynos.c
 
 PCI DRIVER FOR SYNOPSIS DESIGNWARE
-M:	Jingoo Han <jg1.han@samsung.com>
+M:	Jingoo Han <jingoohan1@gmail.com>
 L:	linux-pci@vger.kernel.org
 S:	Maintained
 F:	drivers/pci/host/*designware*
@@ -8505,7 +8530,7 @@ S:	Supported
 F:	sound/soc/samsung/
 
 SAMSUNG FRAMEBUFFER DRIVER
-M:	Jingoo Han <jg1.han@samsung.com>
+M:	Jingoo Han <jingoohan1@gmail.com>
 L:	linux-fbdev@vger.kernel.org
 S:	Maintained
 F:	drivers/video/fbdev/s3c-fb.c
@@ -8810,10 +8835,11 @@ W:	http://www.emulex.com
 S:	Supported
 F:	drivers/scsi/be2iscsi/
 
-SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
-M:	Sathya Perla <sathya.perla@emulex.com>
-M:	Subbu Seetharaman <subbu.seetharaman@emulex.com>
-M:	Ajit Khaparde <ajit.khaparde@emulex.com>
+Emulex 10Gbps NIC BE2, BE3-R, Lancer, Skyhawk-R DRIVER
+M:	Sathya Perla <sathya.perla@avagotech.com>
+M:	Ajit Khaparde <ajit.khaparde@avagotech.com>
+M:	Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com>
+M:	Sriharsha Basavapatna <sriharsha.basavapatna@avagotech.com>
 L:	netdev@vger.kernel.org
 W:	http://www.emulex.com
 S:	Supported

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 1
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Hurr durr I'ma sheep
 
 # *DOCUMENTATION*

arch/arc/Kconfig.debug

@@ -2,19 +2,6 @@ menu "Kernel hacking"
 
 source "lib/Kconfig.debug"
 
-config EARLY_PRINTK
-	bool "Early printk" if EMBEDDED
-	default y
-	help
-	  Write kernel log output directly into the VGA buffer or to a serial
-	  port.
-
-	  This is useful for kernel debugging when your machine crashes very
-	  early before the console code is initialized. For normal operation
-	  it is not recommended because it looks ugly and doesn't cooperate
-	  with klogd/syslogd or the X server. You should normally N here,
-	  unless you want to debug such a crash.
-
 config 16KSTACKS
 	bool "Use 16Kb for kernel stacks instead of 8Kb"
 	help

arch/arc/include/asm/atomic.h

@@ -99,7 +99,7 @@ static inline void atomic_##op(int i, atomic_t *v)			\
 	atomic_ops_unlock(flags);					\
 }
 
-#define ATOMIC_OP_RETURN(op, c_op)					\
+#define ATOMIC_OP_RETURN(op, c_op, asm_op)				\
 static inline int atomic_##op##_return(int i, atomic_t *v)		\
 {									\
 	unsigned long flags;						\

arch/arc/mm/cache_arc700.c

@@ -266,7 +266,7 @@ static inline void __cache_line_loop(unsigned long paddr, unsigned long vaddr,
  * Machine specific helpers for Entire D-Cache or Per Line ops
  */
 
-static unsigned int __before_dc_op(const int op)
+static inline unsigned int __before_dc_op(const int op)
 {
 	unsigned int reg = reg;
 
@@ -284,7 +284,7 @@ static unsigned int __before_dc_op(const int op)
 	return reg;
 }
 
-static void __after_dc_op(const int op, unsigned int reg)
+static inline void __after_dc_op(const int op, unsigned int reg)
 {
 	if (op & OP_FLUSH)	/* flush / flush-n-inv both wait */
 		while (read_aux_reg(ARC_REG_DC_CTRL) & DC_CTRL_FLUSH_STATUS);

arch/arm/boot/dts/am437x-sk-evm.dts

@@ -49,7 +49,7 @@
 		pinctrl-0 = <&matrix_keypad_pins>;
 
 		debounce-delay-ms = <5>;
-		col-scan-delay-us = <1500>;
+		col-scan-delay-us = <5>;
 
 		row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH		/* Bank5, pin5 */
 				&gpio5 6 GPIO_ACTIVE_HIGH>;	/* Bank5, pin6 */
@@ -473,7 +473,7 @@
 		interrupt-parent = <&gpio0>;
 		interrupts = <31 0>;
 
-		wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
 
 		touchscreen-size-x = <480>;
 		touchscreen-size-y = <272>;

arch/arm/boot/dts/am57xx-beagle-x15.dts

@@ -18,6 +18,7 @@
 	aliases {
 		rtc0 = &mcp_rtc;
 		rtc1 = &tps659038_rtc;
+		rtc2 = &rtc;
 	};
 
 	memory {
@@ -83,7 +84,7 @@
 	gpio_fan: gpio_fan {
 		/* Based on 5v 500mA AFB02505HHB */
 		compatible = "gpio-fan";
-		gpios =  <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>;
+		gpios =  <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
 		gpio-fan,speed-map = <0     0>,
 				     <13000 1>;
 		#cooling-cells = <2>;
@@ -130,8 +131,8 @@
 
 	uart3_pins_default: uart3_pins_default {
 		pinctrl-single,pins = <
-			0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd.rxd */
-			0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd.txd */
+			0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
+			0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
 		>;
 	};
 
@@ -455,7 +456,7 @@
 	mcp_rtc: rtc@6f {
 		compatible = "microchip,mcp7941x";
 		reg = <0x6f>;
-		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_LOW>;  /* IRQ_SYS_1N */
+		interrupts = <GIC_SPI 2 IRQ_TYPE_EDGE_RISING>;  /* IRQ_SYS_1N */
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&mcp79410_pins_default>;
@@ -478,7 +479,7 @@
 &uart3 {
 	status = "okay";
 	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-			      <&dra7_pmx_core 0x248>;
+			      <&dra7_pmx_core 0x3f8>;
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins_default>;

arch/arm/boot/dts/armada-375.dtsi

@@ -69,7 +69,7 @@
 		mainpll: mainpll {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <2000000000>;
+			clock-frequency = <1000000000>;
 		};
 		/* 25 MHz reference crystal */
 		refclk: oscillator {

arch/arm/boot/dts/armada-38x.dtsi

@@ -585,7 +585,7 @@
 		mainpll: mainpll {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <2000000000>;
+			clock-frequency = <1000000000>;
 		};
 
 		/* 25 MHz reference crystal */