Merge branch 'for-linus/2639/i2c-2' of git://git.fluff.org/bjdooks/linux

* 'for-linus/2639/i2c-2' of git://git.fluff.org/bjdooks/linux: i2c-pxa2xx: Don't clear isr bits too early i2c-pxa2xx: Fix register offsets i2c-pxa2xx: pass of_node from platform driver to adapter and publish i2c-pxa2xx: check timeout correctly i2c-pxa2xx: add support for shared IRQ handler i2c-pxa2xx: Add PCI support for PXA I2C controller ARM: pxa2xx: reorganize I2C files i2c-pxa2xx: use dynamic register layout i2c-mxs: set controller to pio queue mode after reset i2c-eg20t: support new device OKI SEMICONDUCTOR ML7213 IOH i2c/busses: Add support for Diolan U2C-12 USB-I2C adapter
mariux64 · Mar 22, 2011 · 75ea635 · 75ea635
2 parents 14577be + 97491ba
commit 75ea635
Show file tree

Hide file tree

Showing 48 changed files with 997 additions and 148 deletions.
diff --git a/Documentation/i2c/busses/i2c-diolan-u2c b/Documentation/i2c/busses/i2c-diolan-u2c
@@ -0,0 +1,26 @@
+Kernel driver i2c-diolan-u2c
+
+Supported adapters:
+  * Diolan U2C-12 I2C-USB adapter
+    Documentation:
+	http://www.diolan.com/i2c/u2c12.html
+
+Author: Guenter Roeck <guenter.roeck@ericsson.com>
+
+Description
+-----------
+
+This is the driver for the Diolan U2C-12 USB-I2C adapter.
+
+The Diolan U2C-12 I2C-USB Adapter provides a low cost solution to connect
+a computer to I2C slave devices using a USB interface. It also supports
+connectivity to SPI devices.
+
+This driver only supports the I2C interface of U2C-12. The driver does not use
+interrupts.
+
+
+Module parameters
+-----------------
+
+* frequency: I2C bus frequency
diff --git a/MAINTAINERS b/MAINTAINERS
@@ -2138,6 +2138,12 @@ F:	Documentation/serial/digiepca.txt
 F:	drivers/char/epca*
 F:	drivers/char/digi*
 
+DIOLAN U2C-12 I2C DRIVER
+M:	Guenter Roeck <guenter.roeck@ericsson.com>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	drivers/i2c/busses/i2c-diolan-u2c.c
+
 DIRECTORY NOTIFICATION (DNOTIFY)
 M:	Eric Paris <eparis@parisplace.org>
 S:	Maintained

diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h
@@ -11,8 +11,8 @@ extern void __init mmp2_init_irq(void);
 extern void mmp2_clear_pmic_int(void);
 
 #include <linux/i2c.h>
+#include <linux/i2c/pxa-i2c.h>
 #include <mach/devices.h>
-#include <plat/i2c.h>
 
 extern struct pxa_device_desc mmp2_device_uart1;
 extern struct pxa_device_desc mmp2_device_uart2;

diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -8,8 +8,8 @@ extern void __init pxa168_init_irq(void);
 extern void pxa168_clear_keypad_wakeup(void);
 
 #include <linux/i2c.h>
+#include <linux/i2c/pxa-i2c.h>
 #include <mach/devices.h>
-#include <plat/i2c.h>
 #include <plat/pxa3xx_nand.h>
 #include <video/pxa168fb.h>
 #include <plat/pxa27x_keypad.h>

diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -7,8 +7,8 @@ extern struct sys_timer pxa910_timer;
 extern void __init pxa910_init_irq(void);
 
 #include <linux/i2c.h>
+#include <linux/i2c/pxa-i2c.h>
 #include <mach/devices.h>
-#include <plat/i2c.h>
 #include <plat/pxa3xx_nand.h>
 
 extern struct pxa_device_desc pxa910_device_uart1;

diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
@@ -27,6 +27,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/types.h>
 #include <linux/i2c/pcf857x.h>
+#include <linux/i2c/pxa-i2c.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/physmap.h>
 #include <linux/regulator/max1586.h>
@@ -51,8 +52,6 @@
 #include <mach/irda.h>
 #include <mach/ohci.h>
 
-#include <plat/i2c.h>
-
 #include "generic.h"
 #include "devices.h"
 

diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
@@ -29,6 +29,7 @@
 
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
+#include <linux/i2c/pxa-i2c.h>
 
 #include <linux/mfd/da903x.h>
 #include <linux/regulator/machine.h>
@@ -48,7 +49,6 @@
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
-#include <plat/i2c.h>
 #include <plat/pxa3xx_nand.h>
 #include <mach/audio.h>
 #include <mach/pxa3xx-u2d.h>

diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c
@@ -20,15 +20,14 @@
 #include <mach/hardware.h>
 #include <asm/mach/arch.h>
 #include <linux/i2c.h>
+#include <linux/i2c/pxa-i2c.h>
 
 #include <mach/pxa27x.h>
 #include <mach/colibri.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
 #include <mach/pxa27x-udc.h>
 
-#include <plat/i2c.h>
-
 #include "generic.h"
 #include "devices.h"
 

diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
@@ -21,6 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/pwm_backlight.h>
+#include <linux/i2c/pxa-i2c.h>
 #include <linux/sysdev.h>
 
 #include <asm/irq.h>
@@ -33,8 +34,6 @@
 #include <mach/pxa27x-udc.h>
 #include <mach/pxafb.h>
 
-#include <plat/i2c.h>
-
 #include "devices.h"
 #include "generic.h"
 

diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
@@ -24,6 +24,7 @@
 #include <linux/gpio.h>
 #include <linux/backlight.h>
 #include <linux/i2c.h>
+#include <linux/i2c/pxa-i2c.h>
 #include <linux/io.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
@@ -45,7 +46,6 @@
 #include <asm/mach/irq.h>
 
 #include <mach/pxa25x.h>
-#include <plat/i2c.h>
 #include <mach/irda.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>

diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
@@ -17,12 +17,12 @@
 #include <linux/mtd/partitions.h>
 #include <linux/sm501.h>
 #include <linux/smsc911x.h>
+#include <linux/i2c/pxa-i2c.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/csb726.h>
 #include <mach/mfp-pxa27x.h>
-#include <plat/i2c.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
 #include <mach/pxa2xx-regs.h>

diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
@@ -4,6 +4,7 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/spi/pxa2xx_spi.h>
+#include <linux/i2c/pxa-i2c.h>
 
 #include <asm/pmu.h>
 #include <mach/udc.h>
@@ -16,7 +17,6 @@
 #include <mach/camera.h>
 #include <mach/audio.h>
 #include <mach/hardware.h>
-#include <plat/i2c.h>
 #include <plat/pxa3xx_nand.h>
 
 #include "devices.h"

diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
@@ -31,6 +31,7 @@
 #include <linux/apm-emulation.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
+#include <linux/i2c/pxa-i2c.h>
 #include <linux/regulator/userspace-consumer.h>
 
 #include <media/soc_camera.h>
@@ -45,7 +46,6 @@
 #include <mach/ohci.h>
 #include <mach/mmc.h>
 #include <plat/pxa27x_keypad.h>
-#include <plat/i2c.h>
 #include <mach/camera.h>
 
 #include "generic.h"

diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
@@ -20,6 +20,7 @@
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/leds-lp3944.h>
+#include <linux/i2c/pxa-i2c.h>
 
 #include <media/soc_camera.h>
 
@@ -30,7 +31,6 @@
 #include <mach/pxa27x.h>
 #include <mach/pxafb.h>
 #include <mach/ohci.h>
-#include <plat/i2c.h>
 #include <mach/hardware.h>
 #include <plat/pxa27x_keypad.h>
 #include <mach/camera.h>

diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
@@ -35,14 +35,14 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/usb/gpio_vbus.h>
+#include <linux/i2c/pxa-i2c.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #include <mach/pxa27x.h>
 #include <mach/hx4700.h>
-#include <plat/i2c.h>
 #include <mach/irda.h>
 
 #include <video/platform_lcd.h>

diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
@@ -28,6 +28,7 @@
 #include <linux/leds.h>
 #include <linux/mfd/da903x.h>
 #include <linux/i2c/max732x.h>
+#include <linux/i2c/pxa-i2c.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -45,7 +46,6 @@
 #include <mach/mmc.h>
 #include <plat/pxa27x_keypad.h>
 #include <mach/littleton.h>
-#include <plat/i2c.h>
 #include <plat/pxa3xx_nand.h>
 
 #include "generic.h"

diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
@@ -28,6 +28,7 @@
 #include <linux/regulator/bq24022.h>
 #include <linux/regulator/machine.h>
 #include <linux/usb/gpio_vbus.h>
+#include <linux/i2c/pxa-i2c.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -36,7 +37,6 @@
 #include <mach/pxa27x.h>
 #include <mach/magician.h>
 #include <mach/pxafb.h>
-#include <plat/i2c.h>
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>

diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
@@ -27,6 +27,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/pwm_backlight.h>
 #include <linux/smc91x.h>
+#include <linux/i2c/pxa-i2c.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -46,7 +47,6 @@
 #include <mach/mainstone.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
-#include <plat/i2c.h>
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>

diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
@@ -39,6 +39,7 @@
 #include <linux/usb/gpio_vbus.h>
 #include <linux/regulator/max1586.h>
 #include <linux/slab.h>
+#include <linux/i2c/pxa-i2c.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -50,7 +51,6 @@
 #include <mach/mmc.h>
 #include <mach/udc.h>
 #include <mach/pxa27x-udc.h>
-#include <plat/i2c.h>
 #include <mach/camera.h>
 #include <mach/audio.h>
 #include <media/soc_camera.h>

diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c
@@ -22,8 +22,8 @@
 #include <linux/serial_8250.h>
 #include <linux/dm9000.h>
 #include <linux/gpio.h>
+#include <linux/i2c/pxa-i2c.h>
 
-#include <plat/i2c.h>
 #include <plat/pxa3xx_nand.h>
 
 #include <mach/pxafb.h>

diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
@@ -22,6 +22,7 @@
 #include <linux/power_supply.h>
 #include <linux/usb/gpio_vbus.h>
 #include <linux/regulator/max1586.h>
+#include <linux/i2c/pxa-i2c.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -36,8 +37,6 @@
 #include <mach/palmasoc.h>
 #include <mach/palm27x.h>
 
-#include <plat/i2c.h>
-
 #include "generic.h"
 #include "devices.h"
 

diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -23,12 +23,12 @@
 #include <linux/irq.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
+#include <linux/i2c/pxa-i2c.h>
 #include <linux/pwm_backlight.h>
 
 #include <media/soc_camera.h>
 
 #include <asm/gpio.h>
-#include <plat/i2c.h>
 #include <mach/camera.h>
 #include <asm/mach/map.h>
 #include <mach/pxa27x.h>

diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
@@ -23,6 +23,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/gpio.h>
 #include <linux/i2c.h>
+#include <linux/i2c/pxa-i2c.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/spi/pxa2xx_spi.h>
@@ -44,7 +45,6 @@
 #include <mach/irda.h>
 #include <mach/poodle.h>
 #include <mach/pxafb.h>
-#include <plat/i2c.h>
 
 #include <asm/hardware/scoop.h>
 #include <asm/hardware/locomo.h>

diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
@@ -19,6 +19,7 @@
 #include <linux/sysdev.h>
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/i2c/pxa-i2c.h>
 
 #include <asm/mach/map.h>
 #include <mach/hardware.h>
@@ -32,8 +33,6 @@
 #include <mach/dma.h>
 #include <mach/smemc.h>
 
-#include <plat/i2c.h>
-
 #include "generic.h"
 #include "devices.h"
 #include "clock.h"

diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
@@ -21,6 +21,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/sysdev.h>
+#include <linux/i2c/pxa-i2c.h>
 
 #include <asm/mach/map.h>
 #include <mach/hardware.h>
@@ -32,7 +33,6 @@
 #include <mach/dma.h>
 #include <mach/regs-intc.h>
 #include <mach/smemc.h>
-#include <plat/i2c.h>
 
 #include "generic.h"
 #include "devices.h"