Skip to content

Commit

Permalink
Merge branch 'net-xilinx-axienet-multicast-fixes-and-improvements'
Browse files Browse the repository at this point in the history
Sean Anderson says:

====================
net: xilinx: axienet: Multicast fixes and improvements

This series has a few small patches improving the handling of multicast
addresses. In particular, it makes the driver a whole lot less spammy,
and adjusts things so we aren't in promiscuous mode when we have more
than four multicast addresses (a common occurance on modern systems).

As the hardware has a 4-entry CAM, the ideal method would be to "pack"
multiple addresses into one CAM entry. Something like:

entry.address = address[0] | address[1];
entry.mask = ~(address[0] ^ address[1]);

Which would make the entry match both addresses (along with some others
that would need to be filtered in software).

Mapping addresses to entries in an efficient way is a bit tricky. If
anyone knows of an in-tree example of something like this, I'd be glad
to hear about it.
====================

Link: https://patch.msgid.link/20240822154059.1066595-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
  • Loading branch information
Jakub Kicinski committed Aug 26, 2024
2 parents 5efc962 + 749e67d commit 7888173
Show file tree
Hide file tree
Showing 2 changed files with 22 additions and 21 deletions.
2 changes: 2 additions & 0 deletions drivers/net/ethernet/xilinx/xilinx_axienet.h
Original file line number Diff line number Diff line change
Expand Up @@ -175,6 +175,8 @@
#define XAE_FFE_OFFSET 0x0000070C /* Frame Filter Enable */
#define XAE_AF0_OFFSET 0x00000710 /* Address Filter 0 */
#define XAE_AF1_OFFSET 0x00000714 /* Address Filter 1 */
#define XAE_AM0_OFFSET 0x00000750 /* Frame Filter Mask Value Bytes 3-0 */
#define XAE_AM1_OFFSET 0x00000754 /* Frame Filter Mask Value Bytes 7-4 */

#define XAE_TX_VLAN_DATA_OFFSET 0x00004000 /* TX VLAN data table address */
#define XAE_RX_VLAN_DATA_OFFSET 0x00008000 /* RX VLAN data table address */
Expand Down
41 changes: 20 additions & 21 deletions drivers/net/ethernet/xilinx/xilinx_axienet_main.c
Original file line number Diff line number Diff line change
Expand Up @@ -437,24 +437,27 @@ static void axienet_set_multicast_list(struct net_device *ndev)
u32 reg, af0reg, af1reg;
struct axienet_local *lp = netdev_priv(ndev);

if (ndev->flags & (IFF_ALLMULTI | IFF_PROMISC) ||
netdev_mc_count(ndev) > XAE_MULTICAST_CAM_TABLE_NUM) {
/* We must make the kernel realize we had to move into
* promiscuous mode. If it was a promiscuous mode request
* the flag is already set. If not we set it.
*/
ndev->flags |= IFF_PROMISC;
reg = axienet_ior(lp, XAE_FMI_OFFSET);
reg = axienet_ior(lp, XAE_FMI_OFFSET);
reg &= ~XAE_FMI_PM_MASK;
if (ndev->flags & IFF_PROMISC)
reg |= XAE_FMI_PM_MASK;
else
reg &= ~XAE_FMI_PM_MASK;
axienet_iow(lp, XAE_FMI_OFFSET, reg);

if (ndev->flags & IFF_ALLMULTI ||
netdev_mc_count(ndev) > XAE_MULTICAST_CAM_TABLE_NUM) {
reg &= 0xFFFFFF00;
axienet_iow(lp, XAE_FMI_OFFSET, reg);
dev_info(&ndev->dev, "Promiscuous mode enabled.\n");
axienet_iow(lp, XAE_AF0_OFFSET, 1); /* Multicast bit */
axienet_iow(lp, XAE_AF1_OFFSET, 0);
axienet_iow(lp, XAE_AM0_OFFSET, 1); /* ditto */
axienet_iow(lp, XAE_AM1_OFFSET, 0);
axienet_iow(lp, XAE_FFE_OFFSET, 1);
i = 1;
} else if (!netdev_mc_empty(ndev)) {
struct netdev_hw_addr *ha;

reg = axienet_ior(lp, XAE_FMI_OFFSET);
reg &= ~XAE_FMI_PM_MASK;
axienet_iow(lp, XAE_FMI_OFFSET, reg);

netdev_for_each_mc_addr(ha, ndev) {
if (i >= XAE_MULTICAST_CAM_TABLE_NUM)
break;
Expand All @@ -467,25 +470,21 @@ static void axienet_set_multicast_list(struct net_device *ndev)
af1reg = (ha->addr[4]);
af1reg |= (ha->addr[5] << 8);

reg = axienet_ior(lp, XAE_FMI_OFFSET) & 0xFFFFFF00;
reg &= 0xFFFFFF00;
reg |= i;

axienet_iow(lp, XAE_FMI_OFFSET, reg);
axienet_iow(lp, XAE_AF0_OFFSET, af0reg);
axienet_iow(lp, XAE_AF1_OFFSET, af1reg);
axienet_iow(lp, XAE_AM0_OFFSET, 0xffffffff);
axienet_iow(lp, XAE_AM1_OFFSET, 0x0000ffff);
axienet_iow(lp, XAE_FFE_OFFSET, 1);
i++;
}
} else {
reg = axienet_ior(lp, XAE_FMI_OFFSET);
reg &= ~XAE_FMI_PM_MASK;

axienet_iow(lp, XAE_FMI_OFFSET, reg);
dev_info(&ndev->dev, "Promiscuous mode disabled.\n");
}

for (; i < XAE_MULTICAST_CAM_TABLE_NUM; i++) {
reg = axienet_ior(lp, XAE_FMI_OFFSET) & 0xFFFFFF00;
reg &= 0xFFFFFF00;
reg |= i;
axienet_iow(lp, XAE_FMI_OFFSET, reg);
axienet_iow(lp, XAE_FFE_OFFSET, 0);
Expand Down

0 comments on commit 7888173

Please sign in to comment.