pinctrl: mvebu: fix iomem pointer for dove pinctrl

There has been a change in readl/writel to require registers
addresses marked as IOMEM(). This patch takes care of this and
also replaces ORing address offsets with adding them.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

drivers/pinctrl/mvebu/pinctrl-dove.c

@@ -22,22 +22,22 @@
 
 #include "pinctrl-mvebu.h"
 
-#define DOVE_SB_REGS_VIRT_BASE		0xfde00000
-#define DOVE_MPP_VIRT_BASE		(DOVE_SB_REGS_VIRT_BASE | 0xd0200)
+#define DOVE_SB_REGS_VIRT_BASE		IOMEM(0xfde00000)
+#define DOVE_MPP_VIRT_BASE		(DOVE_SB_REGS_VIRT_BASE + 0xd0200)
 #define DOVE_PMU_MPP_GENERAL_CTRL	(DOVE_MPP_VIRT_BASE + 0x10)
 #define  DOVE_AU0_AC97_SEL		BIT(16)
-#define DOVE_GLOBAL_CONFIG_1		(DOVE_SB_REGS_VIRT_BASE | 0xe802C)
+#define DOVE_GLOBAL_CONFIG_1		(DOVE_SB_REGS_VIRT_BASE + 0xe802C)
 #define  DOVE_TWSI_ENABLE_OPTION1	BIT(7)
-#define DOVE_GLOBAL_CONFIG_2		(DOVE_SB_REGS_VIRT_BASE | 0xe8030)
+#define DOVE_GLOBAL_CONFIG_2		(DOVE_SB_REGS_VIRT_BASE + 0xe8030)
 #define  DOVE_TWSI_ENABLE_OPTION2	BIT(20)
 #define  DOVE_TWSI_ENABLE_OPTION3	BIT(21)
 #define  DOVE_TWSI_OPTION3_GPIO		BIT(22)
-#define DOVE_SSP_CTRL_STATUS_1		(DOVE_SB_REGS_VIRT_BASE | 0xe8034)
+#define DOVE_SSP_CTRL_STATUS_1		(DOVE_SB_REGS_VIRT_BASE + 0xe8034)
 #define  DOVE_SSP_ON_AU1		BIT(0)
-#define DOVE_MPP_GENERAL_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe803c)
+#define DOVE_MPP_GENERAL_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0xe803c)
 #define  DOVE_AU1_SPDIFO_GPIO_EN	BIT(1)
 #define  DOVE_NAND_GPIO_EN		BIT(0)
-#define DOVE_GPIO_LO_VIRT_BASE		(DOVE_SB_REGS_VIRT_BASE | 0xd0400)
+#define DOVE_GPIO_LO_VIRT_BASE		(DOVE_SB_REGS_VIRT_BASE + 0xd0400)
 #define DOVE_MPP_CTRL4_VIRT_BASE	(DOVE_GPIO_LO_VIRT_BASE + 0x40)
 #define  DOVE_SPI_GPIO_SEL		BIT(5)
 #define  DOVE_UART1_GPIO_SEL		BIT(4)