KVM: PPC: Book3S HV: Make HPT resizing work on POWER9

This adds code to enable the HPT resizing code to work on POWER9,
which uses a slightly modified HPT entry format compared to POWER8.
On POWER9, we convert HPTEs read from the HPT from the new format to
the old format so that the rest of the HPT resizing code can work as
before.  HPTEs written to the new HPT are converted to the new format
as the last step before writing them into the new HPT.

This takes out the checks added by commit bcd3bb6 ("KVM: PPC:
Book3S HV: Disable HPT resizing on POWER9 for now", 2017-02-18),
now that HPT resizing works on POWER9.

On POWER9, when we pivot to the new HPT, we now call
kvmppc_setup_partition_table() to update the partition table in order
to make the hardware use the new HPT.

[paulus@ozlabs.org - added kvmppc_setup_partition_table() call,
 wrote commit message.]

Tested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

arch/powerpc/kvm/book3s_64_mmu_hv.c

@@ -1261,6 +1261,11 @@ static unsigned long resize_hpt_rehash_hpte(struct kvm_resize_hpt *resize,
 		/* Nothing to do */
 		goto out;
 
+	if (cpu_has_feature(CPU_FTR_ARCH_300)) {
+		rpte = be64_to_cpu(hptep[1]);
+		vpte = hpte_new_to_old_v(vpte, rpte);
+	}
+
 	/* Unmap */
 	rev = &old->rev[idx];
 	guest_rpte = rev->guest_rpte;
@@ -1290,7 +1295,6 @@ static unsigned long resize_hpt_rehash_hpte(struct kvm_resize_hpt *resize,
 
 	/* Reload PTE after unmap */
 	vpte = be64_to_cpu(hptep[0]);
-
 	BUG_ON(vpte & HPTE_V_VALID);
 	BUG_ON(!(vpte & HPTE_V_ABSENT));
 
@@ -1299,6 +1303,12 @@ static unsigned long resize_hpt_rehash_hpte(struct kvm_resize_hpt *resize,
 		goto out;
 
 	rpte = be64_to_cpu(hptep[1]);
+
+	if (cpu_has_feature(CPU_FTR_ARCH_300)) {
+		vpte = hpte_new_to_old_v(vpte, rpte);
+		rpte = hpte_new_to_old_r(rpte);
+	}
+
 	pshift = kvmppc_hpte_base_page_shift(vpte, rpte);
 	avpn = HPTE_V_AVPN_VAL(vpte) & ~(((1ul << pshift) - 1) >> 23);
 	pteg = idx / HPTES_PER_GROUP;
@@ -1336,6 +1346,10 @@ static unsigned long resize_hpt_rehash_hpte(struct kvm_resize_hpt *resize,
 	new_hptep = (__be64 *)(new->virt + (new_idx << 4));
 
 	replace_vpte = be64_to_cpu(new_hptep[0]);
+	if (cpu_has_feature(CPU_FTR_ARCH_300)) {
+		unsigned long replace_rpte = be64_to_cpu(new_hptep[1]);
+		replace_vpte = hpte_new_to_old_v(replace_vpte, replace_rpte);
+	}
 
 	if (replace_vpte & (HPTE_V_VALID | HPTE_V_ABSENT)) {
 		BUG_ON(new->order >= old->order);
@@ -1351,6 +1365,11 @@ static unsigned long resize_hpt_rehash_hpte(struct kvm_resize_hpt *resize,
 		/* Discard the previous HPTE */
 	}
 
+	if (cpu_has_feature(CPU_FTR_ARCH_300)) {
+		rpte = hpte_old_to_new_r(vpte, rpte);
+		vpte = hpte_old_to_new_v(vpte);
+	}
+
 	new_hptep[1] = cpu_to_be64(rpte);
 	new->rev[new_idx].guest_rpte = guest_rpte;
 	/* No need for a barrier, since new HPT isn't active */
@@ -1368,12 +1387,6 @@ static int resize_hpt_rehash(struct kvm_resize_hpt *resize)
 	unsigned  long i;
 	int rc;
 
-	/*
-	 * resize_hpt_rehash_hpte() doesn't handle the new-format HPTEs
-	 * that POWER9 uses, and could well hit a BUG_ON on POWER9.
-	 */
-	if (cpu_has_feature(CPU_FTR_ARCH_300))
-		return -EIO;
 	for (i = 0; i < kvmppc_hpt_npte(&kvm->arch.hpt); i++) {
 		rc = resize_hpt_rehash_hpte(resize, i);
 		if (rc != 0)
@@ -1404,6 +1417,9 @@ static void resize_hpt_pivot(struct kvm_resize_hpt *resize)
 
 	synchronize_srcu_expedited(&kvm->srcu);
 
+	if (cpu_has_feature(CPU_FTR_ARCH_300))
+		kvmppc_setup_partition_table(kvm);
+
 	resize_hpt_debug(resize, "resize_hpt_pivot() done\n");
 }
 

arch/powerpc/kvm/powerpc.c

@@ -633,8 +633,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 		r = 1;
 		break;
 	case KVM_CAP_SPAPR_RESIZE_HPT:
-		/* Disable this on POWER9 until code handles new HPTE format */
-		r = !!hv_enabled && !cpu_has_feature(CPU_FTR_ARCH_300);
+		r = !!hv_enabled;
 		break;
 #endif
 #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE