Merge commit 'v2.6.30-rc5' into x86/apic

Merge reason: this branch was on a .30-rc2 base - sync it up with
              all the latest fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

.gitignore

@@ -49,6 +49,7 @@ include/linux/compile.h
 include/linux/version.h
 include/linux/utsrelease.h
 include/linux/bounds.h
+include/generated
 
 # stgit generated dirs
 patches-*

Documentation/ABI/testing/sysfs-firmware-acpi

@@ -69,9 +69,13 @@ Description:
 		gpe1F:	     0	invalid
 		gpe_all:    1192
 		sci:	1194
+		sci_not:     0	
 
-		sci - The total number of times the ACPI SCI
-		has claimed an interrupt.
+		sci - The number of times the ACPI SCI
+		has been called and claimed an interrupt.
+
+		sci_not - The number of times the ACPI SCI
+		has been called and NOT claimed an interrupt.
 
 		gpe_all - count of SCI caused by GPEs.
 

Documentation/DocBook/Makefile

@@ -143,7 +143,8 @@ quiet_cmd_db2pdf = PDF     $@
 	$(call cmd,db2pdf)
 
 
-main_idx = Documentation/DocBook/index.html
+index = index.html
+main_idx = Documentation/DocBook/$(index)
 build_main_index = rm -rf $(main_idx) && \
 		   echo '<h1>Linux Kernel HTML Documentation</h1>' >> $(main_idx) && \
 		   echo '<h2>Kernel Version: $(KERNELVERSION)</h2>' >> $(main_idx) && \
@@ -232,7 +233,7 @@ clean-files := $(DOCBOOKS) \
 	$(patsubst %.xml, %.pdf,  $(DOCBOOKS)) \
 	$(patsubst %.xml, %.html, $(DOCBOOKS)) \
 	$(patsubst %.xml, %.9,    $(DOCBOOKS)) \
-	$(C-procfs-example)
+	$(C-procfs-example) $(index)
 
 clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS)) man
 

Documentation/DocBook/kernel-api.tmpl

@@ -190,16 +190,20 @@ X!Ekernel/module.c
 !Edrivers/pci/pci.c
 !Edrivers/pci/pci-driver.c
 !Edrivers/pci/remove.c
-!Edrivers/pci/pci-acpi.c
 !Edrivers/pci/search.c
 !Edrivers/pci/msi.c
 !Edrivers/pci/bus.c
+!Edrivers/pci/access.c
+!Edrivers/pci/irq.c
+!Edrivers/pci/htirq.c
 <!-- FIXME: Removed for now since no structured comments in source
 X!Edrivers/pci/hotplug.c
 -->
 !Edrivers/pci/probe.c
+!Edrivers/pci/slot.c
 !Edrivers/pci/rom.c
 !Edrivers/pci/iov.c
+!Idrivers/pci/pci-sysfs.c
      </sect1>
      <sect1><title>PCI Hotplug Support Library</title>
 !Edrivers/pci/hotplug/pci_hotplug_core.c

Documentation/driver-model/platform.txt

@@ -169,3 +169,62 @@ three different ways to find such a match:
       be probed later if another device registers.  (Which is OK, since
       this interface is only for use with non-hotpluggable devices.)
 
+
+Early Platform Devices and Drivers
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The early platform interfaces provide platform data to platform device
+drivers early on during the system boot. The code is built on top of the
+early_param() command line parsing and can be executed very early on.
+
+Example: "earlyprintk" class early serial console in 6 steps
+
+1. Registering early platform device data
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code registers platform device data using the function
+early_platform_add_devices(). In the case of early serial console this
+should be hardware configuration for the serial port. Devices registered
+at this point will later on be matched against early platform drivers.
+
+2. Parsing kernel command line
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code calls parse_early_param() to parse the kernel
+command line. This will execute all matching early_param() callbacks.
+User specified early platform devices will be registered at this point.
+For the early serial console case the user can specify port on the
+kernel command line as "earlyprintk=serial.0" where "earlyprintk" is
+the class string, "serial" is the name of the platfrom driver and
+0 is the platform device id. If the id is -1 then the dot and the
+id can be omitted.
+
+3. Installing early platform drivers belonging to a certain class
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code may optionally force registration of all early
+platform drivers belonging to a certain class using the function
+early_platform_driver_register_all(). User specified devices from
+step 2 have priority over these. This step is omitted by the serial
+driver example since the early serial driver code should be disabled
+unless the user has specified port on the kernel command line.
+
+4. Early platform driver registration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Compiled-in platform drivers making use of early_platform_init() are
+automatically registered during step 2 or 3. The serial driver example
+should use early_platform_init("earlyprintk", &platform_driver).
+
+5. Probing of early platform drivers belonging to a certain class
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code calls early_platform_driver_probe() to match
+registered early platform devices associated with a certain class with
+registered early platform drivers. Matched devices will get probed().
+This step can be executed at any point during the early boot. As soon
+as possible may be good for the serial port case.
+
+6. Inside the early platform driver probe()
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The driver code needs to take special care during early boot, especially
+when it comes to memory allocation and interrupt registration. The code
+in the probe() function can use is_early_platform_device() to check if
+it is called at early platform device or at the regular platform device
+time. The early serial driver performs register_console() at this point.
+
+For further information, see <linux/platform_device.h>.

Documentation/filesystems/Locking

@@ -512,16 +512,24 @@ locking rules:
 		BKL	mmap_sem	PageLocked(page)
 open:		no	yes
 close:		no	yes
-fault:		no	yes
-page_mkwrite:	no	yes		no
+fault:		no	yes		can return with page locked
+page_mkwrite:	no	yes		can return with page locked
 access:		no	yes
 
-	->page_mkwrite() is called when a previously read-only page is
-about to become writeable. The file system is responsible for
-protecting against truncate races. Once appropriate action has been
-taking to lock out truncate, the page range should be verified to be
-within i_size. The page mapping should also be checked that it is not
-NULL.
+	->fault() is called when a previously not present pte is about
+to be faulted in. The filesystem must find and return the page associated
+with the passed in "pgoff" in the vm_fault structure. If it is possible that
+the page may be truncated and/or invalidated, then the filesystem must lock
+the page, then ensure it is not already truncated (the page lock will block
+subsequent truncate), and then return with VM_FAULT_LOCKED, and the page
+locked. The VM will unlock the page.
+
+	->page_mkwrite() is called when a previously read-only pte is
+about to become writeable. The filesystem again must ensure that there are
+no truncate/invalidate races, and then return with the page locked. If
+the page has been truncated, the filesystem should not look up a new page
+like the ->fault() handler, but simply return with VM_FAULT_NOPAGE, which
+will cause the VM to retry the fault.
 
 	->access() is called when get_user_pages() fails in
 acces_process_vm(), typically used to debug a process through

Documentation/filesystems/caching/cachefiles.txt

@@ -407,7 +407,7 @@ A NOTE ON SECURITY
 ==================
 
 CacheFiles makes use of the split security in the task_struct.  It allocates
-its own task_security structure, and redirects current->act_as to point to it
+its own task_security structure, and redirects current->cred to point to it
 when it acts on behalf of another process, in that process's context.
 
 The reason it does this is that it calls vfs_mkdir() and suchlike rather than
@@ -429,9 +429,9 @@ This means it may lose signals or ptrace events for example, and affects what
 the process looks like in /proc.
 
 So CacheFiles makes use of a logical split in the security between the
-objective security (task->sec) and the subjective security (task->act_as).  The
-objective security holds the intrinsic security properties of a process and is
-never overridden.  This is what appears in /proc, and is what is used when a
+objective security (task->real_cred) and the subjective security (task->cred).
+The objective security holds the intrinsic security properties of a process and
+is never overridden.  This is what appears in /proc, and is what is used when a
 process is the target of an operation by some other process (SIGKILL for
 example).
 

Documentation/filesystems/pohmelfs/design_notes.txt

@@ -56,9 +56,10 @@ workloads and can fully utilize the bandwidth to the servers when doing bulk
 data transfers.
 
 POHMELFS clients operate with a working set of servers and are capable of balancing read-only
-operations (like lookups or directory listings) between them.
+operations (like lookups or directory listings) between them according to IO priorities.
 Administrators can add or remove servers from the set at run-time via special commands (described
-in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers.
+in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers, which are connected
+with write permission turned on. IO priority and permissions can be changed in run-time.
 
 POHMELFS is capable of full data channel encryption and/or strong crypto hashing.
 One can select any kernel supported cipher, encryption mode, hash type and operation mode

Documentation/filesystems/pohmelfs/info.txt

@@ -1,6 +1,8 @@
 POHMELFS usage information.
 
-Mount options:
+Mount options.
+All but index, number of crypto threads and maximum IO size can changed via remount.
+
 idx=%u
  Each mountpoint is associated with a special index via this option.
  Administrator can add or remove servers from the given index, so all mounts,
@@ -52,16 +54,27 @@ mcache_timeout=%u
 
 Usage examples.
 
-Add (or remove if it already exists) server server1.net:1025 into the working set with index $idx
+Add server server1.net:1025 into the working set with index $idx
 with appropriate hash algorithm and key file and cipher algorithm, mode and key file:
-$cfg -a server1.net -p 1025 -i $idx -K $hash_key -k $cipher_key
+$cfg A add -a server1.net -p 1025 -i $idx -K $hash_key -k $cipher_key
 
 Mount filesystem with given index $idx to /mnt mountpoint.
 Client will connect to all servers specified in the working set via previous command:
 mount -t pohmel -o idx=$idx q /mnt
 
-One can add or remove servers from working set after mounting too.
+Change permissions to read-only (-I 1 option, '-I 2' - write-only, 3 - rw):
+$cfg A modify -a server1.net -p 1025 -i $idx -I 1
+
+Change IO priority to 123 (node with the highest priority gets read requests).
+$cfg A modify -a server1.net -p 1025 -i $idx -P 123
 
+One can check currect status of all connections in the mountstats file:
+# cat /proc/$PID/mountstats
+...
+device none mounted on /mnt with fstype pohmel
+idx addr(:port) socket_type protocol active priority permissions
+0 server1.net:1026 1 6 1 250 1
+0 server2.net:1025 1 6 1 123 3
 
 Server installation.
 

Documentation/filesystems/vfs.txt

@@ -277,8 +277,7 @@ or bottom half).
   unfreeze_fs: called when VFS is unlocking a filesystem and making it writable
   	again.
 
-  statfs: called when the VFS needs to get filesystem statistics. This
-	is called with the kernel lock held
+  statfs: called when the VFS needs to get filesystem statistics.
 
   remount_fs: called when the filesystem is remounted. This is called
 	with the kernel lock held

Documentation/input/bcm5974.txt

@@ -0,0 +1,65 @@
+BCM5974 Driver (bcm5974)
+------------------------
+	Copyright (C) 2008-2009	Henrik Rydberg <rydberg@euromail.se>
+
+The USB initialization and package decoding was made by Scott Shawcroft as
+part of the touchd user-space driver project:
+	Copyright (C) 2008	Scott Shawcroft (scott.shawcroft@gmail.com)
+
+The BCM5974 driver is based on the appletouch driver:
+	Copyright (C) 2001-2004	Greg Kroah-Hartman (greg@kroah.com)
+	Copyright (C) 2005	Johannes Berg (johannes@sipsolutions.net)
+	Copyright (C) 2005	Stelian Pop (stelian@popies.net)
+	Copyright (C) 2005	Frank Arnold (frank@scirocco-5v-turbo.de)
+	Copyright (C) 2005	Peter Osterlund (petero2@telia.com)
+	Copyright (C) 2005	Michael Hanselmann (linux-kernel@hansmi.ch)
+	Copyright (C) 2006	Nicolas Boichat (nicolas@boichat.ch)
+
+This driver adds support for the multi-touch trackpad on the new Apple
+Macbook Air and Macbook Pro laptops. It replaces the appletouch driver on
+those computers, and integrates well with the synaptics driver of the Xorg
+system.
+
+Known to work on Macbook Air, Macbook Pro Penryn and the new unibody
+Macbook 5 and Macbook Pro 5.
+
+Usage
+-----
+
+The driver loads automatically for the supported usb device ids, and
+becomes available both as an event device (/dev/input/event*) and as a
+mouse via the mousedev driver (/dev/input/mice).
+
+USB Race
+--------
+
+The Apple multi-touch trackpads report both mouse and keyboard events via
+different interfaces of the same usb device. This creates a race condition
+with the HID driver, which, if not told otherwise, will find the standard
+HID mouse and keyboard, and claim the whole device. To remedy, the usb
+product id must be listed in the mouse_ignore list of the hid driver.
+
+Debug output
+------------
+
+To ease the development for new hardware version, verbose packet output can
+be switched on with the debug kernel module parameter. The range [1-9]
+yields different levels of verbosity. Example (as root):
+
+echo -n 9 > /sys/module/bcm5974/parameters/debug
+
+tail -f /var/log/debug
+
+echo -n 0 > /sys/module/bcm5974/parameters/debug
+
+Trivia
+------
+
+The driver was developed at the ubuntu forums in June 2008 [1], and now has
+a more permanent home at bitmath.org [2].
+
+Links
+-----
+
+[1] http://ubuntuforums.org/showthread.php?t=840040
+[2] http://http://bitmath.org/code/