Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/gi…

…t/linville/wireless-2.6 into for-davem

drivers/net/wireless/ath/ath9k/ar9003_eeprom.c

@@ -4645,10 +4645,16 @@ static void ar9003_hw_set_power_per_rate_table(struct ath_hw *ah,
 	case 1:
 		break;
 	case 2:
-		scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+		if (scaledPower > REDUCE_SCALED_POWER_BY_TWO_CHAIN)
+			scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+		else
+			scaledPower = 0;
 		break;
 	case 3:
-		scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+		if (scaledPower > REDUCE_SCALED_POWER_BY_THREE_CHAIN)
+			scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+		else
+			scaledPower = 0;
 		break;
 	}
 

drivers/net/wireless/ath/ath9k/eeprom_9287.c

@@ -524,10 +524,16 @@ static void ath9k_hw_set_ar9287_power_per_rate_table(struct ath_hw *ah,
 	case 1:
 		break;
 	case 2:
-		scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+		if (scaledPower > REDUCE_SCALED_POWER_BY_TWO_CHAIN)
+			scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+		else
+			scaledPower = 0;
 		break;
 	case 3:
-		scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+		if (scaledPower > REDUCE_SCALED_POWER_BY_THREE_CHAIN)
+			scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+		else
+			scaledPower = 0;
 		break;
 	}
 	scaledPower = max((u16)0, scaledPower);

drivers/net/wireless/iwlegacy/iwl-4965.c

@@ -1543,7 +1543,7 @@ static void iwl4965_temperature_calib(struct iwl_priv *priv)
 	s32 temp;
 
 	temp = iwl4965_hw_get_temperature(priv);
-	if (temp < 0)
+	if (IWL_TX_POWER_TEMPERATURE_OUT_OF_RANGE(temp))
 		return;
 
 	if (priv->temperature != temp) {

drivers/net/wireless/iwlwifi/iwl-6000.c

@@ -603,19 +603,27 @@ struct iwl_cfg iwl6050_2abg_cfg = {
 	IWL_DEVICE_6050,
 };
 
+#define IWL_DEVICE_6150						\
+	.fw_name_pre = IWL6050_FW_PRE,				\
+	.ucode_api_max = IWL6050_UCODE_API_MAX,			\
+	.ucode_api_min = IWL6050_UCODE_API_MIN,			\
+	.ops = &iwl6150_ops,					\
+	.eeprom_ver = EEPROM_6150_EEPROM_VERSION,		\
+	.eeprom_calib_ver = EEPROM_6150_TX_POWER_VERSION,	\
+	.base_params = &iwl6050_base_params,			\
+	.need_dc_calib = true,					\
+	.led_mode = IWL_LED_BLINK,				\
+	.internal_wimax_coex = true
+
 struct iwl_cfg iwl6150_bgn_cfg = {
 	.name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BGN",
-	.fw_name_pre = IWL6050_FW_PRE,
-	.ucode_api_max = IWL6050_UCODE_API_MAX,
-	.ucode_api_min = IWL6050_UCODE_API_MIN,
-	.eeprom_ver = EEPROM_6150_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6150_TX_POWER_VERSION,
-	.ops = &iwl6150_ops,
-	.base_params = &iwl6050_base_params,
+	IWL_DEVICE_6150,
 	.ht_params = &iwl6000_ht_params,
-	.need_dc_calib = true,
-	.led_mode = IWL_LED_RF_STATE,
-	.internal_wimax_coex = true,
+};
+
+struct iwl_cfg iwl6150_bg_cfg = {
+	.name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BG",
+	IWL_DEVICE_6150,
 };
 
 struct iwl_cfg iwl6000_3agn_cfg = {

drivers/net/wireless/iwlwifi/iwl-agn.c

@@ -3831,11 +3831,11 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
 
 /* 6150 WiFi/WiMax Series */
 	{IWL_PCI_DEVICE(0x0885, 0x1305, iwl6150_bgn_cfg)},
-	{IWL_PCI_DEVICE(0x0885, 0x1306, iwl6150_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x0885, 0x1307, iwl6150_bg_cfg)},
 	{IWL_PCI_DEVICE(0x0885, 0x1325, iwl6150_bgn_cfg)},
-	{IWL_PCI_DEVICE(0x0885, 0x1326, iwl6150_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x0885, 0x1327, iwl6150_bg_cfg)},
 	{IWL_PCI_DEVICE(0x0886, 0x1315, iwl6150_bgn_cfg)},
-	{IWL_PCI_DEVICE(0x0886, 0x1316, iwl6150_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x0886, 0x1317, iwl6150_bg_cfg)},
 
 /* 1000 Series WiFi */
 	{IWL_PCI_DEVICE(0x0083, 0x1205, iwl1000_bgn_cfg)},

drivers/net/wireless/iwlwifi/iwl-agn.h

@@ -89,6 +89,7 @@ extern struct iwl_cfg iwl6000_3agn_cfg;
 extern struct iwl_cfg iwl6050_2agn_cfg;
 extern struct iwl_cfg iwl6050_2abg_cfg;
 extern struct iwl_cfg iwl6150_bgn_cfg;
+extern struct iwl_cfg iwl6150_bg_cfg;
 extern struct iwl_cfg iwl1000_bgn_cfg;
 extern struct iwl_cfg iwl1000_bg_cfg;
 extern struct iwl_cfg iwl100_bgn_cfg;

drivers/net/wireless/libertas/cmd.c

@@ -994,6 +994,8 @@ static void lbs_submit_command(struct lbs_private *priv,
 	cmd = cmdnode->cmdbuf;
 
 	spin_lock_irqsave(&priv->driver_lock, flags);
+	priv->seqnum++;
+	cmd->seqnum = cpu_to_le16(priv->seqnum);
 	priv->cur_cmd = cmdnode;
 	spin_unlock_irqrestore(&priv->driver_lock, flags);
 
@@ -1621,11 +1623,9 @@ struct cmd_ctrl_node *__lbs_cmd_async(struct lbs_private *priv,
 	/* Copy the incoming command to the buffer */
 	memcpy(cmdnode->cmdbuf, in_cmd, in_cmd_size);
 
-	/* Set sequence number, clean result, move to buffer */
-	priv->seqnum++;
+	/* Set command, clean result, move to buffer */
 	cmdnode->cmdbuf->command = cpu_to_le16(command);
 	cmdnode->cmdbuf->size    = cpu_to_le16(in_cmd_size);
-	cmdnode->cmdbuf->seqnum  = cpu_to_le16(priv->seqnum);
 	cmdnode->cmdbuf->result  = 0;
 
 	lbs_deb_host("PREP_CMD: command 0x%04x\n", command);

drivers/net/wireless/wl12xx/conf.h

@@ -1157,6 +1157,9 @@ struct conf_sched_scan_settings {
 	/* time to wait on the channel for passive scans (in TUs) */
 	u32 dwell_time_passive;
 
+	/* time to wait on the channel for DFS scans (in TUs) */
+	u32 dwell_time_dfs;
+
 	/* number of probe requests to send on each channel in active scans */
 	u8 num_probe_reqs;
 

drivers/net/wireless/wl12xx/main.c

@@ -311,6 +311,7 @@ static struct conf_drv_settings default_conf = {
 		.min_dwell_time_active = 8,
 		.max_dwell_time_active = 30,
 		.dwell_time_passive    = 100,
+		.dwell_time_dfs        = 150,
 		.num_probe_reqs        = 2,
 		.rssi_threshold        = -90,
 		.snr_threshold         = 0,

drivers/net/wireless/wl12xx/scan.c

@@ -331,16 +331,22 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl,
 	struct conf_sched_scan_settings *c = &wl->conf.sched_scan;
 	int i, j;
 	u32 flags;
+	bool force_passive = !req->n_ssids;
 
 	for (i = 0, j = start;
 	     i < req->n_channels && j < MAX_CHANNELS_ALL_BANDS;
 	     i++) {
 		flags = req->channels[i]->flags;
 
-		if (!(flags & IEEE80211_CHAN_DISABLED) &&
-		    ((flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive) &&
-		    ((flags & IEEE80211_CHAN_RADAR) == radar) &&
-		    (req->channels[i]->band == band)) {
+		if (force_passive)
+			flags |= IEEE80211_CHAN_PASSIVE_SCAN;
+
+		if ((req->channels[i]->band == band) &&
+		    !(flags & IEEE80211_CHAN_DISABLED) &&
+		    (!!(flags & IEEE80211_CHAN_RADAR) == radar) &&
+		    /* if radar is set, we ignore the passive flag */
+		    (radar ||
+		     !!(flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive)) {
 			wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ",
 				     req->channels[i]->band,
 				     req->channels[i]->center_freq);
@@ -350,7 +356,12 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl,
 			wl1271_debug(DEBUG_SCAN, "max_power %d",
 				     req->channels[i]->max_power);
 
-			if (flags & IEEE80211_CHAN_PASSIVE_SCAN) {
+			if (flags & IEEE80211_CHAN_RADAR) {
+				channels[j].flags |= SCAN_CHANNEL_FLAGS_DFS;
+				channels[j].passive_duration =
+					cpu_to_le16(c->dwell_time_dfs);
+			}
+			else if (flags & IEEE80211_CHAN_PASSIVE_SCAN) {
 				channels[j].passive_duration =
 					cpu_to_le16(c->dwell_time_passive);
 			} else {
@@ -359,7 +370,7 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl,
 				channels[j].max_duration =
 					cpu_to_le16(c->max_dwell_time_active);
 			}
-			channels[j].tx_power_att = req->channels[j]->max_power;
+			channels[j].tx_power_att = req->channels[i]->max_power;
 			channels[j].channel = req->channels[i]->hw_value;
 
 			j++;
@@ -386,30 +397,35 @@ wl1271_scan_sched_scan_channels(struct wl1271 *wl,
 		wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
 						    IEEE80211_BAND_2GHZ,
 						    false, false, idx);
-	idx += cfg->active[0];
+	/*
+	 * 5GHz channels always start at position 14, not immediately
+	 * after the last 2.4GHz channel
+	 */
+	idx = 14;
 
 	cfg->passive[1] =
 		wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
 						    IEEE80211_BAND_5GHZ,
 						    false, true, idx);
 	idx += cfg->passive[1];
 
-	cfg->active[1] =
+	cfg->dfs =
 		wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
 						    IEEE80211_BAND_5GHZ,
-						    false, false, 14);
-	idx += cfg->active[1];
+						    true, true, idx);
+	idx += cfg->dfs;
 
-	cfg->dfs =
+	cfg->active[1] =
 		wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
 						    IEEE80211_BAND_5GHZ,
-						    true, false, idx);
-	idx += cfg->dfs;
+						    false, false, idx);
+	idx += cfg->active[1];
 
 	wl1271_debug(DEBUG_SCAN, "    2.4GHz: active %d passive %d",
 		     cfg->active[0], cfg->passive[0]);
 	wl1271_debug(DEBUG_SCAN, "    5GHz: active %d passive %d",
 		     cfg->active[1], cfg->passive[1]);
+	wl1271_debug(DEBUG_SCAN, "    DFS: %d", cfg->dfs);
 
 	return idx;
 }
@@ -421,6 +437,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl,
 	struct wl1271_cmd_sched_scan_config *cfg = NULL;
 	struct conf_sched_scan_settings *c = &wl->conf.sched_scan;
 	int i, total_channels, ret;
+	bool force_passive = !req->n_ssids;
 
 	wl1271_debug(DEBUG_CMD, "cmd sched_scan scan config");
 
@@ -444,7 +461,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl,
 	for (i = 0; i < SCAN_MAX_CYCLE_INTERVALS; i++)
 		cfg->intervals[i] = cpu_to_le32(req->interval);
 
-	if (req->ssids[0].ssid_len && req->ssids[0].ssid) {
+	if (!force_passive && req->ssids[0].ssid_len && req->ssids[0].ssid) {
 		cfg->filter_type = SCAN_SSID_FILTER_SPECIFIC;
 		cfg->ssid_len = req->ssids[0].ssid_len;
 		memcpy(cfg->ssid, req->ssids[0].ssid,
@@ -461,7 +478,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl,
 		goto out;
 	}
 
-	if (cfg->active[0]) {
+	if (!force_passive && cfg->active[0]) {
 		ret = wl1271_cmd_build_probe_req(wl, req->ssids[0].ssid,
 						 req->ssids[0].ssid_len,
 						 ies->ie[IEEE80211_BAND_2GHZ],
@@ -473,7 +490,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl,
 		}
 	}
 
-	if (cfg->active[1]) {
+	if (!force_passive && cfg->active[1]) {
 		ret = wl1271_cmd_build_probe_req(wl,  req->ssids[0].ssid,
 						 req->ssids[0].ssid_len,
 						 ies->ie[IEEE80211_BAND_5GHZ],

drivers/net/wireless/wl12xx/scan.h

@@ -137,6 +137,9 @@ enum {
 	SCAN_BSS_TYPE_ANY,
 };
 
+#define SCAN_CHANNEL_FLAGS_DFS		BIT(0)
+#define SCAN_CHANNEL_FLAGS_DFS_ENABLED	BIT(1)
+
 struct conn_scan_ch_params {
 	__le16 min_duration;
 	__le16 max_duration;

drivers/net/wireless/zd1211rw/zd_usb.c

@@ -1533,6 +1533,31 @@ static void __exit usb_exit(void)
 module_init(usb_init);
 module_exit(usb_exit);
 
+static int zd_ep_regs_out_msg(struct usb_device *udev, void *data, int len,
+			      int *actual_length, int timeout)
+{
+	/* In USB 2.0 mode EP_REGS_OUT endpoint is interrupt type. However in
+	 * USB 1.1 mode endpoint is bulk. Select correct type URB by endpoint
+	 * descriptor.
+	 */
+	struct usb_host_endpoint *ep;
+	unsigned int pipe;
+
+	pipe = usb_sndintpipe(udev, EP_REGS_OUT);
+	ep = usb_pipe_endpoint(udev, pipe);
+	if (!ep)
+		return -EINVAL;
+
+	if (usb_endpoint_xfer_int(&ep->desc)) {
+		return usb_interrupt_msg(udev, pipe, data, len,
+					 actual_length, timeout);
+	} else {
+		pipe = usb_sndbulkpipe(udev, EP_REGS_OUT);
+		return usb_bulk_msg(udev, pipe, data, len, actual_length,
+				    timeout);
+	}
+}
+
 static int usb_int_regs_length(unsigned int count)
 {
 	return sizeof(struct usb_int_regs) + count * sizeof(struct reg_data);
@@ -1648,15 +1673,14 @@ int zd_usb_ioread16v(struct zd_usb *usb, u16 *values,
 
 	udev = zd_usb_to_usbdev(usb);
 	prepare_read_regs_int(usb);
-	r = usb_interrupt_msg(udev, usb_sndintpipe(udev, EP_REGS_OUT),
-			      req, req_len, &actual_req_len, 50 /* ms */);
+	r = zd_ep_regs_out_msg(udev, req, req_len, &actual_req_len, 50 /*ms*/);
 	if (r) {
 		dev_dbg_f(zd_usb_dev(usb),
-			"error in usb_interrupt_msg(). Error number %d\n", r);
+			"error in zd_ep_regs_out_msg(). Error number %d\n", r);
 		goto error;
 	}
 	if (req_len != actual_req_len) {
-		dev_dbg_f(zd_usb_dev(usb), "error in usb_interrupt_msg()\n"
+		dev_dbg_f(zd_usb_dev(usb), "error in zd_ep_regs_out_msg()\n"
 			" req_len %d != actual_req_len %d\n",
 			req_len, actual_req_len);
 		r = -EIO;
@@ -1818,9 +1842,17 @@ int zd_usb_iowrite16v_async(struct zd_usb *usb, const struct zd_ioreq16 *ioreqs,
 		rw->value = cpu_to_le16(ioreqs[i].value);
 	}
 
-	usb_fill_int_urb(urb, udev, usb_sndintpipe(udev, EP_REGS_OUT),
-			 req, req_len, iowrite16v_urb_complete, usb,
-			 ep->desc.bInterval);
+	/* In USB 2.0 mode endpoint is interrupt type. However in USB 1.1 mode
+	 * endpoint is bulk. Select correct type URB by endpoint descriptor.
+	 */
+	if (usb_endpoint_xfer_int(&ep->desc))
+		usb_fill_int_urb(urb, udev, usb_sndintpipe(udev, EP_REGS_OUT),
+				 req, req_len, iowrite16v_urb_complete, usb,
+				 ep->desc.bInterval);
+	else
+		usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, EP_REGS_OUT),
+				  req, req_len, iowrite16v_urb_complete, usb);
+
 	urb->transfer_flags |= URB_FREE_BUFFER;
 
 	/* Submit previous URB */
@@ -1924,15 +1956,14 @@ int zd_usb_rfwrite(struct zd_usb *usb, u32 value, u8 bits)
 	}
 
 	udev = zd_usb_to_usbdev(usb);
-	r = usb_interrupt_msg(udev, usb_sndintpipe(udev, EP_REGS_OUT),
-			      req, req_len, &actual_req_len, 50 /* ms */);
+	r = zd_ep_regs_out_msg(udev, req, req_len, &actual_req_len, 50 /*ms*/);
 	if (r) {
 		dev_dbg_f(zd_usb_dev(usb),
-			"error in usb_interrupt_msg(). Error number %d\n", r);
+			"error in zd_ep_regs_out_msg(). Error number %d\n", r);
 		goto out;
 	}
 	if (req_len != actual_req_len) {
-		dev_dbg_f(zd_usb_dev(usb), "error in usb_interrupt_msg()"
+		dev_dbg_f(zd_usb_dev(usb), "error in zd_ep_regs_out_msg()"
 			" req_len %d != actual_req_len %d\n",
 			req_len, actual_req_len);
 		r = -EIO;

include/linux/ieee80211.h

@@ -1003,8 +1003,12 @@ struct ieee80211_ht_info {
 #define WLAN_CAPABILITY_ESS		(1<<0)
 #define WLAN_CAPABILITY_IBSS		(1<<1)
 
-/* A mesh STA sets the ESS and IBSS capability bits to zero */
-#define WLAN_CAPABILITY_IS_MBSS(cap)	\
+/*
+ * A mesh STA sets the ESS and IBSS capability bits to zero.
+ * however, this holds true for p2p probe responses (in the p2p_find
+ * phase) as well.
+ */
+#define WLAN_CAPABILITY_IS_STA_BSS(cap)	\
 	(!((cap) & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)))
 
 #define WLAN_CAPABILITY_CF_POLLABLE	(1<<2)