Merge tag 'sh-pfc-for-v5.4-tag2' of https://git.kernel.org/pub/scm/li…

…nux/kernel/git/geert/renesas-drivers into devel

pinctrl: sh-pfc: Updates for v5.4 (take two)

  - Support switching between function and gpio at runtime,
  - Small fixes and cleanups.

drivers/pinctrl/pinctrl-rza1.c

@@ -866,8 +866,10 @@ static int rza1_dt_node_pin_count(struct device_node *np)
 	npins = 0;
 	for_each_child_of_node(np, child) {
 		of_pins = of_find_property(child, "pinmux", NULL);
-		if (!of_pins)
+		if (!of_pins) {
+			of_node_put(child);
 			return -EINVAL;
+		}
 
 		npins += of_pins->length / sizeof(u32);
 	}
@@ -1025,8 +1027,10 @@ static int rza1_dt_node_to_map(struct pinctrl_dev *pctldev,
 		for_each_child_of_node(np, child) {
 			ret = rza1_parse_pinmux_node(rza1_pctl, child, mux_conf,
 						     grpin);
-			if (ret < 0)
+			if (ret < 0) {
+				of_node_put(child);
 				return ret;
+			}
 
 			grpin += ret;
 			mux_conf += ret;
@@ -1272,8 +1276,10 @@ static int rza1_gpio_register(struct rza1_pinctrl *rza1_pctl)
 
 		ret = rza1_parse_gpiochip(rza1_pctl, child, &gpio_chips[i],
 					  &gpio_ranges[i]);
-		if (ret)
+		if (ret) {
+			of_node_put(child);
 			return ret;
+		}
 
 		++i;
 	}

drivers/pinctrl/pinctrl-rza2.c

@@ -11,7 +11,8 @@
  */
 
 #include <linux/bitops.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
+#include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/pinctrl/pinmux.h>
@@ -115,7 +116,7 @@ static void rza2_pin_to_gpio(void __iomem *pfc_base, unsigned int offset,
 	mask16 = RZA2_PDR_MASK << (pin * 2);
 	reg16 &= ~mask16;
 
-	if (dir == GPIOF_DIR_IN)
+	if (dir)
 		reg16 |= RZA2_PDR_INPUT << (pin * 2);	/* pin as input */
 	else
 		reg16 |= RZA2_PDR_OUTPUT << (pin * 2);	/* pin as output */
@@ -134,26 +135,26 @@ static int rza2_chip_get_direction(struct gpio_chip *chip, unsigned int offset)
 	reg16 = (reg16 >> (pin * 2)) & RZA2_PDR_MASK;
 
 	if (reg16 == RZA2_PDR_OUTPUT)
-		return GPIOF_DIR_OUT;
+		return 0;
 
 	if (reg16 == RZA2_PDR_INPUT)
-		return GPIOF_DIR_IN;
+		return 1;
 
 	/*
 	 * This GPIO controller has a default Hi-Z state that is not input or
 	 * output, so force the pin to input now.
 	 */
-	rza2_pin_to_gpio(priv->base, offset, GPIOF_DIR_IN);
+	rza2_pin_to_gpio(priv->base, offset, 1);
 
-	return GPIOF_DIR_IN;
+	return 1;
 }
 
 static int rza2_chip_direction_input(struct gpio_chip *chip,
 				     unsigned int offset)
 {
 	struct rza2_pinctrl_priv *priv = gpiochip_get_data(chip);
 
-	rza2_pin_to_gpio(priv->base, offset, GPIOF_DIR_IN);
+	rza2_pin_to_gpio(priv->base, offset, 1);
 
 	return 0;
 }
@@ -191,7 +192,7 @@ static int rza2_chip_direction_output(struct gpio_chip *chip,
 	struct rza2_pinctrl_priv *priv = gpiochip_get_data(chip);
 
 	rza2_chip_set(chip, offset, val);
-	rza2_pin_to_gpio(priv->base, offset, GPIOF_DIR_OUT);
+	rza2_pin_to_gpio(priv->base, offset, 0);
 
 	return 0;
 }

drivers/pinctrl/sh-pfc/gpio.c

@@ -7,7 +7,7 @@
  */
 
 #include <linux/device.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/pinctrl/consumer.h>

drivers/pinctrl/sh-pfc/pinctrl.c

@@ -26,7 +26,9 @@
 #include "../pinconf.h"
 
 struct sh_pfc_pin_config {
-	u32 type;
+	unsigned int mux_mark;
+	bool mux_set;
+	bool gpio_enabled;
 };
 
 struct sh_pfc_pinctrl {
@@ -355,16 +357,25 @@ static int sh_pfc_func_set_mux(struct pinctrl_dev *pctldev, unsigned selector,
 		int idx = sh_pfc_get_pin_index(pfc, grp->pins[i]);
 		struct sh_pfc_pin_config *cfg = &pmx->configs[idx];
 
-		if (cfg->type != PINMUX_TYPE_NONE) {
-			ret = -EBUSY;
+		/*
+		 * This driver cannot manage both gpio and mux when the gpio
+		 * pin is already enabled. So, this function fails.
+		 */
+		if (cfg->gpio_enabled)
+			return -EBUSY;
+
+		ret = sh_pfc_config_mux(pfc, grp->mux[i], PINMUX_TYPE_FUNCTION);
+		if (ret < 0)
 			goto done;
-		}
 	}
 
+	/* All group pins are configured, mark the pins as mux_set */
 	for (i = 0; i < grp->nr_pins; ++i) {
-		ret = sh_pfc_config_mux(pfc, grp->mux[i], PINMUX_TYPE_FUNCTION);
-		if (ret < 0)
-			break;
+		int idx = sh_pfc_get_pin_index(pfc, grp->pins[i]);
+		struct sh_pfc_pin_config *cfg = &pmx->configs[idx];
+
+		cfg->mux_set = true;
+		cfg->mux_mark = grp->mux[i];
 	}
 
 done:
@@ -385,14 +396,6 @@ static int sh_pfc_gpio_request_enable(struct pinctrl_dev *pctldev,
 
 	spin_lock_irqsave(&pfc->lock, flags);
 
-	if (cfg->type != PINMUX_TYPE_NONE) {
-		dev_err(pfc->dev,
-			"Pin %u is busy, can't configure it as GPIO.\n",
-			offset);
-		ret = -EBUSY;
-		goto done;
-	}
-
 	if (!pfc->gpio) {
 		/* If GPIOs are handled externally the pin mux type need to be
 		 * set to GPIO here.
@@ -404,7 +407,7 @@ static int sh_pfc_gpio_request_enable(struct pinctrl_dev *pctldev,
 			goto done;
 	}
 
-	cfg->type = PINMUX_TYPE_GPIO;
+	cfg->gpio_enabled = true;
 
 	ret = 0;
 
@@ -425,7 +428,10 @@ static void sh_pfc_gpio_disable_free(struct pinctrl_dev *pctldev,
 	unsigned long flags;
 
 	spin_lock_irqsave(&pfc->lock, flags);
-	cfg->type = PINMUX_TYPE_NONE;
+	cfg->gpio_enabled = false;
+	/* If mux is already set, this configures it here */
+	if (cfg->mux_set)
+		sh_pfc_config_mux(pfc, cfg->mux_mark, PINMUX_TYPE_FUNCTION);
 	spin_unlock_irqrestore(&pfc->lock, flags);
 }
 
@@ -438,7 +444,6 @@ static int sh_pfc_gpio_set_direction(struct pinctrl_dev *pctldev,
 	int new_type = input ? PINMUX_TYPE_INPUT : PINMUX_TYPE_OUTPUT;
 	int idx = sh_pfc_get_pin_index(pfc, offset);
 	const struct sh_pfc_pin *pin = &pfc->info->pins[idx];
-	struct sh_pfc_pin_config *cfg = &pmx->configs[idx];
 	unsigned long flags;
 	unsigned int dir;
 	int ret;
@@ -458,8 +463,6 @@ static int sh_pfc_gpio_set_direction(struct pinctrl_dev *pctldev,
 	if (ret < 0)
 		goto done;
 
-	cfg->type = new_type;
-
 done:
 	spin_unlock_irqrestore(&pfc->lock, flags);
 	return ret;
@@ -782,13 +785,11 @@ static int sh_pfc_map_pins(struct sh_pfc *pfc, struct sh_pfc_pinctrl *pmx)
 
 	for (i = 0; i < pfc->info->nr_pins; ++i) {
 		const struct sh_pfc_pin *info = &pfc->info->pins[i];
-		struct sh_pfc_pin_config *cfg = &pmx->configs[i];
 		struct pinctrl_pin_desc *pin = &pmx->pins[i];
 
 		/* If the pin number is equal to -1 all pins are considered */
 		pin->number = info->pin != (u16)-1 ? info->pin : i;
 		pin->name = info->name;
-		cfg->type = PINMUX_TYPE_NONE;
 	}
 
 	return 0;