Merge tag 'asoc-v4.3-rc2' into asoc-next

ASoC: Updates for v4.4

A first batch of updates targetted at v4.4.  There are no substantial
core fixes here, the biggest block of changes is updates to the rcar
drivers and the addition of a CODEC driver for the AK4613.

# gpg: Signature made Fri 25 Sep 2015 05:37:06 KST using RSA key ID 5D5487D0
# gpg: key CD7BEEBC: no public key for trusted key - skipped
# gpg: key CD7BEEBC marked as ultimately trusted
# gpg: key AF88CD16: no public key for trusted key - skipped
# gpg: key AF88CD16 marked as ultimately trusted
# gpg: key 16005C11: no public key for trusted key - skipped
# gpg: key 16005C11 marked as ultimately trusted
# gpg: key 5621E907: no public key for trusted key - skipped
# gpg: key 5621E907 marked as ultimately trusted
# gpg: key 5C6153AD: no public key for trusted key - skipped
# gpg: key 5C6153AD marked as ultimately trusted
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"

Documentation/devicetree/bindings/sound/ak4613.txt

@@ -0,0 +1,17 @@
+AK4613 I2C transmitter
+
+This device supports I2C mode only.
+
+Required properties:
+
+- compatible : "asahi-kasei,ak4613"
+- reg : The chip select number on the I2C bus
+
+Example:
+
+&i2c {
+	ak4613: ak4613@0x10 {
+		compatible = "asahi-kasei,ak4613";
+		reg = <0x10>;
+	};
+};

Documentation/devicetree/bindings/sound/ak4642.txt

@@ -7,11 +7,31 @@ Required properties:
   - compatible : "asahi-kasei,ak4642" or "asahi-kasei,ak4643" or "asahi-kasei,ak4648"
   - reg : The chip select number on the I2C bus
 
-Example:
+Optional properties:
+
+  - #clock-cells :		common clock binding; shall be set to 0
+  - clocks :			common clock binding; MCKI clock
+  - clock-frequency :		common clock binding; frequency of MCKO
+  - clock-output-names :	common clock binding; MCKO clock name
+
+Example 1:
 
 &i2c {
 	ak4648: ak4648@0x12 {
 		compatible = "asahi-kasei,ak4642";
 		reg = <0x12>;
 	};
 };
+
+Example 2:
+
+&i2c {
+	ak4643: codec@12 {
+		compatible = "asahi-kasei,ak4643";
+		reg = <0x12>;
+		#clock-cells = <0>;
+		clocks = <&audio_clock>;
+		clock-frequency = <12288000>;
+		clock-output-names = "ak4643_mcko";
+	};
+};

Documentation/devicetree/bindings/sound/renesas,rsnd.txt

@@ -4,10 +4,12 @@ Required properties:
 - compatible			: "renesas,rcar_sound-<soctype>", fallbacks
 				  "renesas,rcar_sound-gen1" if generation1, and
 				  "renesas,rcar_sound-gen2" if generation2
+				  "renesas,rcar_sound-gen3" if generation3
 				  Examples with soctypes are:
 				    - "renesas,rcar_sound-r8a7778" (R-Car M1A)
 				    - "renesas,rcar_sound-r8a7790" (R-Car H2)
 				    - "renesas,rcar_sound-r8a7791" (R-Car M2-W)
+				    - "renesas,rcar_sound-r8a7795" (R-Car H3)
 - reg				: Should contain the register physical address.
 				  required register is
 				   SRU/ADG/SSI      if generation1
@@ -30,6 +32,11 @@ Required properties:
 - rcar_sound,dai		: DAI contents.
 				  The number of DAI subnode should be same as HW.
 				  see below for detail.
+- #sound-dai-cells		: it must be 0 if your system is using single DAI
+				  it must be 1 if your system is using multi  DAI
+- #clock-cells			: it must be 0 if your system has audio_clkout
+				  it must be 1 if your system has audio_clkout0/1/2/3
+- clock-frequency		: for all audio_clkout0/1/2/3
 
 SSI subnode properties:
 - interrupts			: Should contain SSI interrupt for PIO transfer

Documentation/devicetree/bindings/sound/sun4i-codec.txt

@@ -0,0 +1,33 @@
+* Allwinner A10 Codec
+
+Required properties:
+- compatible: must be either "allwinner,sun4i-a10-codec" or
+  "allwinner,sun7i-a20-codec"
+- reg: must contain the registers location and length
+- interrupts: must contain the codec interrupt
+- dmas: DMA channels for tx and rx dma. See the DMA client binding,
+	Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: should include "tx" and "rx".
+- clocks: a list of phandle + clock-specifer pairs, one for each entry
+  in clock-names.
+- clock-names: should contain followings:
+   - "apb": the parent APB clock for this controller
+   - "codec": the parent module clock
+- routing : A list of the connections between audio components.  Each
+  entry is a pair of strings, the first being the connection's sink,
+  the second being the connection's source.
+
+
+Example:
+codec: codec@01c22c00 {
+	#sound-dai-cells = <0>;
+	compatible = "allwinner,sun7i-a20-codec";
+	reg = <0x01c22c00 0x40>;
+	interrupts = <0 30 4>;
+	clocks = <&apb0_gates 0>, <&codec_clk>;
+	clock-names = "apb", "codec";
+	dmas = <&dma 0 19>, <&dma 0 19>;
+	dma-names = "rx", "tx";
+	routing = "Headphone Jack", "HP Right",
+		  "Headphone Jack", "HP Left";
+};

Documentation/devicetree/bindings/sound/tdm-slot.txt

@@ -4,11 +4,15 @@ This specifies audio DAI's TDM slot.
 
 TDM slot properties:
 dai-tdm-slot-num : Number of slots in use.
-dai-tdm-slot-width :  Width in bits for each slot.
+dai-tdm-slot-width : Width in bits for each slot.
+dai-tdm-slot-tx-mask : Transmit direction slot mask, optional
+dai-tdm-slot-rx-mask : Receive direction slot mask, optional
 
 For instance:
 	dai-tdm-slot-num = <2>;
 	dai-tdm-slot-width = <8>;
+	dai-tdm-slot-tx-mask = <0 1>;
+	dai-tdm-slot-rx-mask = <1 0>;
 
 And for each spcified driver, there could be one .of_xlate_tdm_slot_mask()
 to specify a explicit mapping of the channels and the slots. If it's absent
@@ -18,3 +22,8 @@ tx and rx masks.
 For snd_soc_of_xlate_tdm_slot_mask(), the tx and rx masks will use a 1 bit
 for an active slot as default, and the default active bits are at the LSB of
 the masks.
+
+The explicit masks are given as array of integers, where the first
+number presents bit-0 (LSB), second presents bit-1, etc. Any non zero
+number is considered 1 and 0 is 0. snd_soc_of_xlate_tdm_slot_mask()
+does not do anything, if either mask is set non zero value.

drivers/spi/spi-atmel.c

@@ -871,14 +871,7 @@ static int atmel_spi_set_xfer_speed(struct atmel_spi *as,
 	 * Calculate the lowest divider that satisfies the
 	 * constraint, assuming div32/fdiv/mbz == 0.
 	 */
-	if (xfer->speed_hz)
-		scbr = DIV_ROUND_UP(bus_hz, xfer->speed_hz);
-	else
-		/*
-		 * This can happend if max_speed is null.
-		 * In this case, we set the lowest possible speed
-		 */
-		scbr = 0xff;
+	scbr = DIV_ROUND_UP(bus_hz, xfer->speed_hz);
 
 	/*
 	 * If the resulting divider doesn't fit into the
@@ -1300,14 +1293,12 @@ static int atmel_spi_one_transfer(struct spi_master *master,
 		return -EINVAL;
 	}
 
-	if (xfer->bits_per_word) {
-		asd = spi->controller_state;
-		bits = (asd->csr >> 4) & 0xf;
-		if (bits != xfer->bits_per_word - 8) {
-			dev_dbg(&spi->dev,
+	asd = spi->controller_state;
+	bits = (asd->csr >> 4) & 0xf;
+	if (bits != xfer->bits_per_word - 8) {
+		dev_dbg(&spi->dev,
 			"you can't yet change bits_per_word in transfers\n");
-			return -ENOPROTOOPT;
-		}
+		return -ENOPROTOOPT;
 	}
 
 	/*

include/sound/rcar_snd.h

@@ -12,7 +12,6 @@
 #ifndef RCAR_SND_H
 #define RCAR_SND_H
 
-#include <linux/sh_clk.h>
 
 #define RSND_GEN1_SRU	0
 #define RSND_GEN1_ADG	1

include/sound/rt5645.h

@@ -21,6 +21,8 @@ struct rt5645_platform_data {
 	/* 0 = IN2P; 1 = GPIO6; 2 = GPIO10; 3 = GPIO12 */
 
 	unsigned int jd_mode;
+	/* Invert JD when jack insert */
+	bool jd_invert;
 };
 
 #endif

include/sound/simple_card.h

@@ -19,6 +19,8 @@ struct asoc_simple_dai {
 	unsigned int sysclk;
 	int slots;
 	int slot_width;
+	unsigned int tx_slot_mask;
+	unsigned int rx_slot_mask;
 	struct clk *clk;
 };
 

include/sound/soc.h

@@ -226,6 +226,18 @@
 	.info = snd_soc_info_volsw, \
 	.get = xhandler_get, .put = xhandler_put, \
 	.private_value = SOC_SINGLE_VALUE(xreg, xshift, xmax, xinvert, 0) }
+#define SOC_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \
+				 xhandler_get, xhandler_put, tlv_array) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
+	.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
+		 SNDRV_CTL_ELEM_ACCESS_READWRITE,\
+	.tlv.p = (tlv_array), \
+	.info = snd_soc_info_volsw_range, \
+	.get = xhandler_get, .put = xhandler_put, \
+	.private_value = (unsigned long)&(struct soc_mixer_control) \
+		{.reg = xreg, .rreg = xreg, .shift = xshift, \
+		 .rshift = xshift, .min = xmin, .max = xmax, \
+		 .platform_max = xmax, .invert = xinvert} }
 #define SOC_DOUBLE_EXT_TLV(xname, xreg, shift_left, shift_right, xmax, xinvert,\
 	 xhandler_get, xhandler_put, tlv_array) \
 {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
@@ -1603,6 +1615,8 @@ int snd_soc_of_parse_card_name(struct snd_soc_card *card,
 int snd_soc_of_parse_audio_simple_widgets(struct snd_soc_card *card,
 					  const char *propname);
 int snd_soc_of_parse_tdm_slot(struct device_node *np,
+			      unsigned int *tx_mask,
+			      unsigned int *rx_mask,
 			      unsigned int *slots,
 			      unsigned int *slot_width);
 void snd_soc_of_parse_audio_prefix(struct snd_soc_card *card,

sound/soc/Kconfig

@@ -58,6 +58,7 @@ source "sound/soc/sh/Kconfig"
 source "sound/soc/sirf/Kconfig"
 source "sound/soc/spear/Kconfig"
 source "sound/soc/sti/Kconfig"
+source "sound/soc/sunxi/Kconfig"
 source "sound/soc/tegra/Kconfig"
 source "sound/soc/txx9/Kconfig"
 source "sound/soc/ux500/Kconfig"

sound/soc/Makefile

@@ -40,6 +40,7 @@ obj-$(CONFIG_SND_SOC)	+= sh/
 obj-$(CONFIG_SND_SOC)	+= sirf/
 obj-$(CONFIG_SND_SOC)	+= spear/
 obj-$(CONFIG_SND_SOC)	+= sti/
+obj-$(CONFIG_SND_SOC)	+= sunxi/
 obj-$(CONFIG_SND_SOC)	+= tegra/
 obj-$(CONFIG_SND_SOC)	+= txx9/
 obj-$(CONFIG_SND_SOC)	+= ux500/

sound/soc/atmel/atmel_wm8904.c

@@ -176,6 +176,7 @@ static const struct of_device_id atmel_asoc_wm8904_dt_ids[] = {
 	{ .compatible = "atmel,asoc-wm8904", },
 	{ }
 };
+MODULE_DEVICE_TABLE(of, atmel_asoc_wm8904_dt_ids);
 #endif
 
 static struct platform_driver atmel_asoc_wm8904_driver = {

sound/soc/au1x/db1000.c

@@ -38,14 +38,7 @@ static int db1000_audio_probe(struct platform_device *pdev)
 {
 	struct snd_soc_card *card = &db1000_ac97;
 	card->dev = &pdev->dev;
-	return snd_soc_register_card(card);
-}
-
-static int db1000_audio_remove(struct platform_device *pdev)
-{
-	struct snd_soc_card *card = platform_get_drvdata(pdev);
-	snd_soc_unregister_card(card);
-	return 0;
+	return devm_snd_soc_register_card(&pdev->dev, card);
 }
 
 static struct platform_driver db1000_audio_driver = {
@@ -54,7 +47,6 @@ static struct platform_driver db1000_audio_driver = {
 		.pm	= &snd_soc_pm_ops,
 	},
 	.probe		= db1000_audio_probe,
-	.remove		= db1000_audio_remove,
 };
 
 module_platform_driver(db1000_audio_driver);

sound/soc/au1x/db1200.c

@@ -178,14 +178,7 @@ static int db1200_audio_probe(struct platform_device *pdev)
 
 	card = db1200_cards[pid->driver_data];
 	card->dev = &pdev->dev;
-	return snd_soc_register_card(card);
-}
-
-static int db1200_audio_remove(struct platform_device *pdev)
-{
-	struct snd_soc_card *card = platform_get_drvdata(pdev);
-	snd_soc_unregister_card(card);
-	return 0;
+	return devm_snd_soc_register_card(&pdev->dev, card);
 }
 
 static struct platform_driver db1200_audio_driver = {
@@ -195,7 +188,6 @@ static struct platform_driver db1200_audio_driver = {
 	},
 	.id_table	= db1200_pids,
 	.probe		= db1200_audio_probe,
-	.remove		= db1200_audio_remove,
 };
 
 module_platform_driver(db1200_audio_driver);

sound/soc/blackfin/bf5xx-ad1836.c

@@ -87,27 +87,18 @@ static int bf5xx_ad1836_driver_probe(struct platform_device *pdev)
 	card->dev = &pdev->dev;
 	platform_set_drvdata(pdev, card);
 
-	ret = snd_soc_register_card(card);
+	ret = devm_snd_soc_register_card(&pdev->dev, card);
 	if (ret)
 		dev_err(&pdev->dev, "Failed to register card\n");
 	return ret;
 }
 
-static int bf5xx_ad1836_driver_remove(struct platform_device *pdev)
-{
-	struct snd_soc_card *card = platform_get_drvdata(pdev);
-
-	snd_soc_unregister_card(card);
-	return 0;
-}
-
 static struct platform_driver bf5xx_ad1836_driver = {
 	.driver = {
 		.name = "bfin-snd-ad1836",
 		.pm = &snd_soc_pm_ops,
 	},
 	.probe = bf5xx_ad1836_driver_probe,
-	.remove = bf5xx_ad1836_driver_remove,
 };
 module_platform_driver(bf5xx_ad1836_driver);
 

sound/soc/blackfin/bfin-eval-adau1373.c

@@ -154,16 +154,7 @@ static int bfin_eval_adau1373_probe(struct platform_device *pdev)
 
 	card->dev = &pdev->dev;
 
-	return snd_soc_register_card(&bfin_eval_adau1373);
-}
-
-static int bfin_eval_adau1373_remove(struct platform_device *pdev)
-{
-	struct snd_soc_card *card = platform_get_drvdata(pdev);
-
-	snd_soc_unregister_card(card);
-
-	return 0;
+	return devm_snd_soc_register_card(&pdev->dev, &bfin_eval_adau1373);
 }
 
 static struct platform_driver bfin_eval_adau1373_driver = {
@@ -172,7 +163,6 @@ static struct platform_driver bfin_eval_adau1373_driver = {
 		.pm = &snd_soc_pm_ops,
 	},
 	.probe = bfin_eval_adau1373_probe,
-	.remove = bfin_eval_adau1373_remove,
 };
 
 module_platform_driver(bfin_eval_adau1373_driver);

sound/soc/blackfin/bfin-eval-adau1701.c

@@ -94,16 +94,7 @@ static int bfin_eval_adau1701_probe(struct platform_device *pdev)
 
 	card->dev = &pdev->dev;
 
-	return snd_soc_register_card(&bfin_eval_adau1701);
-}
-
-static int bfin_eval_adau1701_remove(struct platform_device *pdev)
-{
-	struct snd_soc_card *card = platform_get_drvdata(pdev);
-
-	snd_soc_unregister_card(card);
-
-	return 0;
+	return devm_snd_soc_register_card(&pdev->dev, &bfin_eval_adau1701);
 }
 
 static struct platform_driver bfin_eval_adau1701_driver = {
@@ -112,7 +103,6 @@ static struct platform_driver bfin_eval_adau1701_driver = {
 		.pm = &snd_soc_pm_ops,
 	},
 	.probe = bfin_eval_adau1701_probe,
-	.remove = bfin_eval_adau1701_remove,
 };
 
 module_platform_driver(bfin_eval_adau1701_driver);