Merge branch 'upstream-davem' of master.kernel.org:/pub/scm/linux/ker…

…nel/git/jgarzik/netdev-2.6

Documentation/networking/e1000.txt

@@ -513,21 +513,11 @@ Additional Configurations
   Intel(R) PRO/1000 PT Dual Port Server Connection
   Intel(R) PRO/1000 PT Dual Port Server Adapter
   Intel(R) PRO/1000 PF Dual Port Server Adapter
-  Intel(R) PRO/1000 PT Quad Port Server Adapter 
+  Intel(R) PRO/1000 PT Quad Port Server Adapter
 
   NAPI
   ----
-  NAPI (Rx polling mode) is supported in the e1000 driver.  NAPI is enabled
-  or disabled based on the configuration of the kernel.  To override
-  the default, use the following compile-time flags.
-
-  To enable NAPI, compile the driver module, passing in a configuration option:
-
-       make CFLAGS_EXTRA=-DE1000_NAPI install
-
-  To disable NAPI, compile the driver module, passing in a configuration option:
-
-       make CFLAGS_EXTRA=-DE1000_NO_NAPI install
+  NAPI (Rx polling mode) is enabled in the e1000 driver.
 
   See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI.
 

MAINTAINERS

@@ -3527,7 +3527,7 @@ S:	Supported
 
 S390 NETWORK DRIVERS
 P:	Ursula Braun
-M:	ubraun@linux.vnet.ibm.com
+M:	ursula.braun@de.ibm.com
 P:	Frank Blaschka
 M:	blaschka@linux.vnet.ibm.com
 M:	linux390@de.ibm.com
@@ -3547,7 +3547,7 @@ S:	Supported
 
 S390 IUCV NETWORK LAYER
 P:	Ursula Braun
-M:	ubraun@linux.vnet.ibm.com
+M:	ursula.braun@de.ibm.com
 M:	linux390@de.ibm.com
 L:	linux-s390@vger.kernel.org
 W:	http://www.ibm.com/developerworks/linux/linux390/

drivers/net/8139too.c

@@ -98,7 +98,6 @@
 #include <linux/compiler.h>
 #include <linux/pci.h>
 #include <linux/init.h>
-#include <linux/ioport.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/rtnetlink.h>
@@ -120,11 +119,6 @@
                                  NETIF_MSG_LINK)
 
 
-/* enable PIO instead of MMIO, if CONFIG_8139TOO_PIO is selected */
-#ifdef CONFIG_8139TOO_PIO
-#define USE_IO_OPS 1
-#endif
-
 /* define to 1, 2 or 3 to enable copious debugging info */
 #define RTL8139_DEBUG 0
 
@@ -156,6 +150,13 @@
 static int media[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
 static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
 
+/* Whether to use MMIO or PIO. Default to MMIO. */
+#ifdef CONFIG_8139TOO_PIO
+static int use_io = 1;
+#else
+static int use_io = 0;
+#endif
+
 /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
    The RTL chips use a 64 element hash table based on the Ethernet CRC.  */
 static int multicast_filter_limit = 32;
@@ -614,6 +615,8 @@ MODULE_DESCRIPTION ("RealTek RTL-8139 Fast Ethernet driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 
+module_param(use_io, int, 0);
+MODULE_PARM_DESC(use_io, "Force use of I/O access mode. 0=MMIO 1=PIO");
 module_param(multicast_filter_limit, int, 0);
 module_param_array(media, int, NULL, 0);
 module_param_array(full_duplex, int, NULL, 0);
@@ -709,13 +712,8 @@ static void __rtl8139_cleanup_dev (struct net_device *dev)
 	assert (tp->pci_dev != NULL);
 	pdev = tp->pci_dev;
 
-#ifdef USE_IO_OPS
-	if (tp->mmio_addr)
-		ioport_unmap (tp->mmio_addr);
-#else
 	if (tp->mmio_addr)
 		pci_iounmap (pdev, tp->mmio_addr);
-#endif /* USE_IO_OPS */
 
 	/* it's ok to call this even if we have no regions to free */
 	pci_release_regions (pdev);
@@ -790,32 +788,33 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev,
 	DPRINTK("PIO region size == 0x%02X\n", pio_len);
 	DPRINTK("MMIO region size == 0x%02lX\n", mmio_len);
 
-#ifdef USE_IO_OPS
-	/* make sure PCI base addr 0 is PIO */
-	if (!(pio_flags & IORESOURCE_IO)) {
-		dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n");
-		rc = -ENODEV;
-		goto err_out;
-	}
-	/* check for weird/broken PCI region reporting */
-	if (pio_len < RTL_MIN_IO_SIZE) {
-		dev_err(&pdev->dev, "Invalid PCI I/O region size(s), aborting\n");
-		rc = -ENODEV;
-		goto err_out;
-	}
-#else
-	/* make sure PCI base addr 1 is MMIO */
-	if (!(mmio_flags & IORESOURCE_MEM)) {
-		dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n");
-		rc = -ENODEV;
-		goto err_out;
-	}
-	if (mmio_len < RTL_MIN_IO_SIZE) {
-		dev_err(&pdev->dev, "Invalid PCI mem region size(s), aborting\n");
-		rc = -ENODEV;
-		goto err_out;
+retry:
+	if (use_io) {
+		/* make sure PCI base addr 0 is PIO */
+		if (!(pio_flags & IORESOURCE_IO)) {
+			dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n");
+			rc = -ENODEV;
+			goto err_out;
+		}
+		/* check for weird/broken PCI region reporting */
+		if (pio_len < RTL_MIN_IO_SIZE) {
+			dev_err(&pdev->dev, "Invalid PCI I/O region size(s), aborting\n");
+			rc = -ENODEV;
+			goto err_out;
+		}
+	} else {
+		/* make sure PCI base addr 1 is MMIO */
+		if (!(mmio_flags & IORESOURCE_MEM)) {
+			dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n");
+			rc = -ENODEV;
+			goto err_out;
+		}
+		if (mmio_len < RTL_MIN_IO_SIZE) {
+			dev_err(&pdev->dev, "Invalid PCI mem region size(s), aborting\n");
+			rc = -ENODEV;
+			goto err_out;
+		}
 	}
-#endif
 
 	rc = pci_request_regions (pdev, DRV_NAME);
 	if (rc)
@@ -825,28 +824,28 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev,
 	/* enable PCI bus-mastering */
 	pci_set_master (pdev);
 
-#ifdef USE_IO_OPS
-	ioaddr = ioport_map(pio_start, pio_len);
-	if (!ioaddr) {
-		dev_err(&pdev->dev, "cannot map PIO, aborting\n");
-		rc = -EIO;
-		goto err_out;
-	}
-	dev->base_addr = pio_start;
-	tp->mmio_addr = ioaddr;
-	tp->regs_len = pio_len;
-#else
-	/* ioremap MMIO region */
-	ioaddr = pci_iomap(pdev, 1, 0);
-	if (ioaddr == NULL) {
-		dev_err(&pdev->dev, "cannot remap MMIO, aborting\n");
-		rc = -EIO;
-		goto err_out;
+	if (use_io) {
+		ioaddr = pci_iomap(pdev, 0, 0);
+		if (!ioaddr) {
+			dev_err(&pdev->dev, "cannot map PIO, aborting\n");
+			rc = -EIO;
+			goto err_out;
+		}
+		dev->base_addr = pio_start;
+		tp->regs_len = pio_len;
+	} else {
+		/* ioremap MMIO region */
+		ioaddr = pci_iomap(pdev, 1, 0);
+		if (ioaddr == NULL) {
+			dev_err(&pdev->dev, "cannot remap MMIO, trying PIO\n");
+			pci_release_regions(pdev);
+			use_io = 1;
+			goto retry;
+		}
+		dev->base_addr = (long) ioaddr;
+		tp->regs_len = mmio_len;
 	}
-	dev->base_addr = (long) ioaddr;
 	tp->mmio_addr = ioaddr;
-	tp->regs_len = mmio_len;
-#endif /* USE_IO_OPS */
 
 	/* Bring old chips out of low-power mode. */
 	RTL_W8 (HltClk, 'R');
@@ -952,6 +951,14 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
 			   "Use the \"8139cp\" driver for improved performance and stability.\n");
 	}
 
+	if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
+	    pdev->device == PCI_DEVICE_ID_REALTEK_8139 &&
+	    pdev->subsystem_vendor == PCI_VENDOR_ID_ATHEROS &&
+	    pdev->subsystem_device == PCI_DEVICE_ID_REALTEK_8139) {
+		printk(KERN_INFO "8139too: OQO Model 2 detected. Forcing PIO\n");
+		use_io = 1;
+	}
+
 	i = rtl8139_init_board (pdev, &dev);
 	if (i < 0)
 		return i;
@@ -2381,28 +2388,31 @@ static void rtl8139_set_msglevel(struct net_device *dev, u32 datum)
 	np->msg_enable = datum;
 }
 
-/* TODO: we are too slack to do reg dumping for pio, for now */
-#ifdef CONFIG_8139TOO_PIO
-#define rtl8139_get_regs_len	NULL
-#define rtl8139_get_regs	NULL
-#else
 static int rtl8139_get_regs_len(struct net_device *dev)
 {
-	struct rtl8139_private *np = netdev_priv(dev);
+	struct rtl8139_private *np;
+	/* TODO: we are too slack to do reg dumping for pio, for now */
+	if (use_io)
+		return 0;
+	np = netdev_priv(dev);
 	return np->regs_len;
 }
 
 static void rtl8139_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf)
 {
-	struct rtl8139_private *np = netdev_priv(dev);
+	struct rtl8139_private *np;
+
+	/* TODO: we are too slack to do reg dumping for pio, for now */
+	if (use_io)
+		return;
+	np = netdev_priv(dev);
 
 	regs->version = RTL_REGS_VER;
 
 	spin_lock_irq(&np->lock);
 	memcpy_fromio(regbuf, np->mmio_addr, regs->len);
 	spin_unlock_irq(&np->lock);
 }
-#endif /* CONFIG_8139TOO_MMIO */
 
 static int rtl8139_get_sset_count(struct net_device *dev, int sset)
 {

drivers/net/Kconfig

@@ -1926,20 +1926,6 @@ config E1000
 	  To compile this driver as a module, choose M here. The module
 	  will be called e1000.
 
-config E1000_NAPI
-	bool "Use Rx Polling (NAPI)"
-	depends on E1000
-	help
-	  NAPI is a new driver API designed to reduce CPU and interrupt load
-	  when the driver is receiving lots of packets from the card. It is
-	  still somewhat experimental and thus not yet enabled by default.
-
-	  If your estimated Rx load is 10kpps or more, or if the card will be
-	  deployed on potentially unfriendly networks (e.g. in a firewall),
-	  then say Y here.
-
-	  If in doubt, say N.
-
 config E1000_DISABLE_PACKET_SPLIT
 	bool "Disable Packet Split for PCI express adapters"
 	depends on E1000
@@ -2304,6 +2290,17 @@ config ATL1
 	  To compile this driver as a module, choose M here.  The module
 	  will be called atl1.
 
+config ATL1E
+	tristate "Atheros L1E Gigabit Ethernet support (EXPERIMENTAL)"
+	depends on PCI && EXPERIMENTAL
+	select CRC32
+	select MII
+	help
+	  This driver supports the Atheros L1E gigabit ethernet adapter.
+
+	  To compile this driver as a module, choose M here.  The module
+	  will be called atl1e.
+
 endif # NETDEV_1000
 
 #

drivers/net/Makefile

@@ -15,6 +15,7 @@ obj-$(CONFIG_EHEA) += ehea/
 obj-$(CONFIG_CAN) += can/
 obj-$(CONFIG_BONDING) += bonding/
 obj-$(CONFIG_ATL1) += atlx/
+obj-$(CONFIG_ATL1E) += atl1e/
 obj-$(CONFIG_GIANFAR) += gianfar_driver.o
 obj-$(CONFIG_TEHUTI) += tehuti.o
 

drivers/net/arm/at91_ether.c

@@ -820,7 +820,7 @@ static int at91ether_tx(struct sk_buff *skb, struct net_device *dev)
 		lp->skb = skb;
 		lp->skb_length = skb->len;
 		lp->skb_physaddr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE);
-		lp->stats.tx_bytes += skb->len;
+		dev->stats.tx_bytes += skb->len;
 
 		/* Set address of the data in the Transmit Address register */
 		at91_emac_write(AT91_EMAC_TAR, lp->skb_physaddr);
@@ -843,34 +843,33 @@ static int at91ether_tx(struct sk_buff *skb, struct net_device *dev)
  */
 static struct net_device_stats *at91ether_stats(struct net_device *dev)
 {
-	struct at91_private *lp = netdev_priv(dev);
 	int ale, lenerr, seqe, lcol, ecol;
 
 	if (netif_running(dev)) {
-		lp->stats.rx_packets += at91_emac_read(AT91_EMAC_OK);		/* Good frames received */
+		dev->stats.rx_packets += at91_emac_read(AT91_EMAC_OK);		/* Good frames received */
 		ale = at91_emac_read(AT91_EMAC_ALE);
-		lp->stats.rx_frame_errors += ale;				/* Alignment errors */
+		dev->stats.rx_frame_errors += ale;				/* Alignment errors */
 		lenerr = at91_emac_read(AT91_EMAC_ELR) + at91_emac_read(AT91_EMAC_USF);
-		lp->stats.rx_length_errors += lenerr;				/* Excessive Length or Undersize Frame error */
+		dev->stats.rx_length_errors += lenerr;				/* Excessive Length or Undersize Frame error */
 		seqe = at91_emac_read(AT91_EMAC_SEQE);
-		lp->stats.rx_crc_errors += seqe;				/* CRC error */
-		lp->stats.rx_fifo_errors += at91_emac_read(AT91_EMAC_DRFC);	/* Receive buffer not available */
-		lp->stats.rx_errors += (ale + lenerr + seqe
+		dev->stats.rx_crc_errors += seqe;				/* CRC error */
+		dev->stats.rx_fifo_errors += at91_emac_read(AT91_EMAC_DRFC);	/* Receive buffer not available */
+		dev->stats.rx_errors += (ale + lenerr + seqe
 			+ at91_emac_read(AT91_EMAC_CDE) + at91_emac_read(AT91_EMAC_RJB));
 
-		lp->stats.tx_packets += at91_emac_read(AT91_EMAC_FRA);		/* Frames successfully transmitted */
-		lp->stats.tx_fifo_errors += at91_emac_read(AT91_EMAC_TUE);	/* Transmit FIFO underruns */
-		lp->stats.tx_carrier_errors += at91_emac_read(AT91_EMAC_CSE);	/* Carrier Sense errors */
-		lp->stats.tx_heartbeat_errors += at91_emac_read(AT91_EMAC_SQEE);/* Heartbeat error */
+		dev->stats.tx_packets += at91_emac_read(AT91_EMAC_FRA);		/* Frames successfully transmitted */
+		dev->stats.tx_fifo_errors += at91_emac_read(AT91_EMAC_TUE);	/* Transmit FIFO underruns */
+		dev->stats.tx_carrier_errors += at91_emac_read(AT91_EMAC_CSE);	/* Carrier Sense errors */
+		dev->stats.tx_heartbeat_errors += at91_emac_read(AT91_EMAC_SQEE);/* Heartbeat error */
 
 		lcol = at91_emac_read(AT91_EMAC_LCOL);
 		ecol = at91_emac_read(AT91_EMAC_ECOL);
-		lp->stats.tx_window_errors += lcol;			/* Late collisions */
-		lp->stats.tx_aborted_errors += ecol;			/* 16 collisions */
+		dev->stats.tx_window_errors += lcol;			/* Late collisions */
+		dev->stats.tx_aborted_errors += ecol;			/* 16 collisions */
 
-		lp->stats.collisions += (at91_emac_read(AT91_EMAC_SCOL) + at91_emac_read(AT91_EMAC_MCOL) + lcol + ecol);
+		dev->stats.collisions += (at91_emac_read(AT91_EMAC_SCOL) + at91_emac_read(AT91_EMAC_MCOL) + lcol + ecol);
 	}
-	return &lp->stats;
+	return &dev->stats;
 }
 
 /*
@@ -896,16 +895,16 @@ static void at91ether_rx(struct net_device *dev)
 
 			skb->protocol = eth_type_trans(skb, dev);
 			dev->last_rx = jiffies;
-			lp->stats.rx_bytes += pktlen;
+			dev->stats.rx_bytes += pktlen;
 			netif_rx(skb);
 		}
 		else {
-			lp->stats.rx_dropped += 1;
+			dev->stats.rx_dropped += 1;
 			printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
 		}
 
 		if (dlist->descriptors[lp->rxBuffIndex].size & EMAC_MULTICAST)
-			lp->stats.multicast++;
+			dev->stats.multicast++;
 
 		dlist->descriptors[lp->rxBuffIndex].addr &= ~EMAC_DESC_DONE;	/* reset ownership bit */
 		if (lp->rxBuffIndex == MAX_RX_DESCR-1)				/* wrap after last buffer */
@@ -934,7 +933,7 @@ static irqreturn_t at91ether_interrupt(int irq, void *dev_id)
 	if (intstatus & AT91_EMAC_TCOM) {	/* Transmit complete */
 		/* The TCOM bit is set even if the transmission failed. */
 		if (intstatus & (AT91_EMAC_TUND | AT91_EMAC_RTRY))
-			lp->stats.tx_errors += 1;
+			dev->stats.tx_errors += 1;
 
 		if (lp->skb) {
 			dev_kfree_skb_irq(lp->skb);