Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/jikos/trivial

Pull trivial tree updates from Jiri Kosina.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  floppy: make local variable non-static
  exynos: fixes an incorrect header guard
  dt-bindings: fixes some incorrect header guards
  cpufreq-dt: correct dead link in documentation
  cpufreq: ARM big LITTLE: correct dead link in documentation
  treewide: Fix typos in printk
  Documentation: filesystem: Fix typo in fs/eventfd.c
  fs/super.c: use && instead of & for warn_on condition
  Documentation: fix sysfs-ptp
  lib: scatterlist: fix Kconfig description

Documentation/ABI/testing/sysfs-ptp

@@ -74,7 +74,7 @@ Description:
 		assignment may be changed by two writing numbers into
 		the file.
 
-What:		/sys/class/ptp/ptpN/pps_avaiable
+What:		/sys/class/ptp/ptpN/pps_available
 Date:		September 2010
 Contact:	Richard Cochran <richardcochran@gmail.com>
 Description:

Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt

@@ -12,7 +12,7 @@ must be present contiguously. Generic DT driver will check only node 'x' for
 cpu:x.
 
 Required properties:
-- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt
+- operating-points: Refer to Documentation/devicetree/bindings/opp/opp.txt
   for details
 
 Optional properties:

Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt

@@ -11,7 +11,7 @@ Required properties:
 - None
 
 Optional properties:
-- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt for
+- operating-points: Refer to Documentation/devicetree/bindings/opp/opp.txt for
   details. OPPs *must* be supplied either via DT, i.e. this property, or
   populated at runtime.
 - clock-latency: Specify the possible maximum transition latency for clock,

Documentation/sysctl/vm.txt

@@ -135,7 +135,7 @@ Contains, as a percentage of total available memory that contains free pages
 and reclaimable pages, the number of pages at which the background kernel
 flusher threads will start writing out dirty data.
 
-The total avaiable memory is not equal to total system memory.
+The total available memory is not equal to total system memory.
 
 ==============================================================
 
@@ -170,7 +170,7 @@ Contains, as a percentage of total available memory that contains free pages
 and reclaimable pages, the number of pages at which a process which is
 generating disk writes will itself start writing out dirty data.
 
-The total avaiable memory is not equal to total system memory.
+The total available memory is not equal to total system memory.
 
 ==============================================================
 

drivers/block/floppy.c

@@ -3585,7 +3585,7 @@ static void __init config_types(void)
 		unsigned int type = UDP->cmos;
 		struct floppy_drive_params *params;
 		const char *name = NULL;
-		static char temparea[32];
+		char temparea[32];
 
 		if (type < ARRAY_SIZE(default_drive_params)) {
 			params = &default_drive_params[type].params;
@@ -3596,7 +3596,8 @@ static void __init config_types(void)
 				allowed_drive_mask &= ~(1 << drive);
 		} else {
 			params = &default_drive_params[0].params;
-			sprintf(temparea, "unknown type %d (usb?)", type);
+			snprintf(temparea, sizeof(temparea),
+				 "unknown type %d (usb?)", type);
 			name = temparea;
 		}
 		if (name) {

drivers/firmware/efi/libstub/fdt.c

@@ -253,7 +253,7 @@ efi_status_t allocate_new_fdt_and_exit_boot(efi_system_table_t *sys_table,
 			sys_table->boottime->free_pool(memory_map);
 			new_fdt_size += EFI_PAGE_SIZE;
 		} else {
-			pr_efi_err(sys_table, "Unable to constuct new device tree.\n");
+			pr_efi_err(sys_table, "Unable to construct new device tree.\n");
 			goto fail_free_mmap;
 		}
 	}

drivers/gpu/drm/exynos/exynos_drm_fb.h

@@ -12,7 +12,7 @@
  */
 
 #ifndef _EXYNOS_DRM_FB_H_
-#define _EXYNOS_DRM_FB_H
+#define _EXYNOS_DRM_FB_H_
 
 #include "exynos_drm_gem.h"
 

drivers/infiniband/hw/cxgb4/cm.c

@@ -449,7 +449,7 @@ static void act_open_req_arp_failure(void *handle, struct sk_buff *skb)
 {
 	struct c4iw_ep *ep = handle;
 
-	printk(KERN_ERR MOD "ARP failure duing connect\n");
+	printk(KERN_ERR MOD "ARP failure during connect\n");
 	kfree_skb(skb);
 	connect_reply_upcall(ep, -EHOSTUNREACH);
 	state_set(&ep->com, DEAD);

drivers/md/raid0.c

@@ -549,13 +549,13 @@ static void *raid0_takeover_raid10(struct mddev *mddev)
 	 *  - all mirrors must be already degraded
 	 */
 	if (mddev->layout != ((1 << 8) + 2)) {
-		printk(KERN_ERR "md/raid0:%s:: Raid0 cannot takover layout: 0x%x\n",
+		printk(KERN_ERR "md/raid0:%s:: Raid0 cannot takeover layout: 0x%x\n",
 		       mdname(mddev),
 		       mddev->layout);
 		return ERR_PTR(-EINVAL);
 	}
 	if (mddev->raid_disks & 1) {
-		printk(KERN_ERR "md/raid0:%s: Raid0 cannot takover Raid10 with odd disk number.\n",
+		printk(KERN_ERR "md/raid0:%s: Raid0 cannot takeover Raid10 with odd disk number.\n",
 		       mdname(mddev));
 		return ERR_PTR(-EINVAL);
 	}

drivers/media/common/saa7146/saa7146_video.c

@@ -502,7 +502,7 @@ static int vidioc_s_fbuf(struct file *file, void *fh, const struct v4l2_framebuf
 	/* check if overlay is running */
 	if (IS_OVERLAY_ACTIVE(fh) != 0) {
 		if (vv->video_fh != fh) {
-			DEB_D("refusing to change framebuffer informations while overlay is active in another open\n");
+			DEB_D("refusing to change framebuffer information while overlay is active in another open\n");
 			return -EBUSY;
 		}
 	}

drivers/media/dvb-frontends/m88ds3103.c

@@ -685,7 +685,7 @@ static int m88ds3103_init(struct dvb_frontend *fe)
 	/* request the firmware, this will block and timeout */
 	ret = request_firmware(&fw, fw_file, &client->dev);
 	if (ret) {
-		dev_err(&client->dev, "firmare file '%s' not found\n", fw_file);
+		dev_err(&client->dev, "firmware file '%s' not found\n", fw_file);
 		goto err;
 	}
 

drivers/media/dvb-frontends/si2165.c

@@ -541,7 +541,7 @@ static int si2165_upload_firmware(struct si2165_state *state)
 					   &offset, block_count);
 	if (ret < 0) {
 		dev_err(&state->i2c->dev,
-			"%s: firmare could not be uploaded\n",
+			"%s: firmware could not be uploaded\n",
 			KBUILD_MODNAME);
 		goto error;
 	}
@@ -565,7 +565,7 @@ static int si2165_upload_firmware(struct si2165_state *state)
 
 	if (len != offset) {
 		dev_err(&state->i2c->dev,
-			"%s: firmare len mismatch %04x != %04x\n",
+			"%s: firmware len mismatch %04x != %04x\n",
 			KBUILD_MODNAME, len, offset);
 		ret = -EINVAL;
 		goto error;

drivers/media/pci/netup_unidvb/netup_unidvb_core.c

@@ -387,7 +387,7 @@ static int netup_unidvb_dvb_init(struct netup_unidvb_dev *ndev,
 		vb2_dvb_alloc_frontend(
 			&ndev->frontends[num], 3) == NULL) {
 		dev_dbg(&ndev->pci_dev->dev,
-			"%s(): unable to to alllocate vb2_dvb_frontend\n",
+			"%s(): unable to allocate vb2_dvb_frontend\n",
 			__func__);
 		return -ENOMEM;
 	}

drivers/net/ethernet/intel/i40evf/i40evf_main.c

@@ -1239,7 +1239,7 @@ static int i40evf_config_rss_aq(struct i40e_vsi *vsi, const u8 *seed,
 
 	if (adapter->current_op != I40E_VIRTCHNL_OP_UNKNOWN) {
 		/* bail because we already have a command pending */
-		dev_err(&adapter->pdev->dev, "Cannot confiure RSS, command %d pending\n",
+		dev_err(&adapter->pdev->dev, "Cannot configure RSS, command %d pending\n",
 			adapter->current_op);
 		return -EBUSY;
 	}

drivers/soc/ti/knav_dma.c

@@ -389,7 +389,7 @@ static int of_channel_match_helper(struct device_node *np, const char *name,
 	*dma_instance = dma_node->name;
 	index = of_property_match_string(np, "ti,navigator-dma-names", name);
 	if (index < 0) {
-		dev_err(kdev->dev, "No 'ti,navigator-dma-names' propery\n");
+		dev_err(kdev->dev, "No 'ti,navigator-dma-names' property\n");
 		return -ENODEV;
 	}
 

fs/eventfd.c

@@ -45,10 +45,10 @@ struct eventfd_ctx {
  *
  * This function is supposed to be called by the kernel in paths that do not
  * allow sleeping. In this function we allow the counter to reach the ULLONG_MAX
- * value, and we signal this as overflow condition by returining a POLLERR
+ * value, and we signal this as overflow condition by returning a POLLERR
  * to poll(2).
  *
- * Returns the amount by which the counter was incrememnted.  This will be less
+ * Returns the amount by which the counter was incremented.  This will be less
  * than @n if the counter has overflowed.
  */
 __u64 eventfd_signal(struct eventfd_ctx *ctx, __u64 n)

fs/super.c

@@ -1197,7 +1197,7 @@ int __sb_start_write(struct super_block *sb, int level, bool wait)
 	else
 		ret = percpu_down_read_trylock(sb->s_writers.rw_sem + level-1);
 
-	WARN_ON(force_trylock & !ret);
+	WARN_ON(force_trylock && !ret);
 	return ret;
 }
 EXPORT_SYMBOL(__sb_start_write);

include/dt-bindings/leds/common.h

@@ -6,7 +6,7 @@
  * Author: Jacek Anaszewski <j.anaszewski@samsung.com>
  */
 
-#ifndef __DT_BINDINGS_LEDS_H__
+#ifndef __DT_BINDINGS_LEDS_H
 #define __DT_BINDINGS_LEDS_H
 
 /* External trigger type */

include/dt-bindings/mfd/palmas.h

@@ -7,7 +7,7 @@
  *
  */
 
-#ifndef __DT_BINDINGS_PALMAS_H__
+#ifndef __DT_BINDINGS_PALMAS_H
 #define __DT_BINDINGS_PALMAS_H
 
 /* External control pins */

lib/Kconfig

@@ -512,9 +512,9 @@ source "lib/fonts/Kconfig"
 config SG_SPLIT
 	def_bool n
 	help
-	 Provides a heler to split scatterlists into chunks, each chunk being a
-	 scatterlist. This should be selected by a driver or an API which
-	 whishes to split a scatterlist amongst multiple DMA channel.
+	 Provides a helper to split scatterlists into chunks, each chunk being
+	 a scatterlist. This should be selected by a driver or an API which
+	 whishes to split a scatterlist amongst multiple DMA channels.
 
 #
 # sg chaining option

sound/drivers/pcm-indirect2.c

@@ -47,7 +47,7 @@ void snd_pcm_indirect2_stat(struct snd_pcm_substream *substream,
 	int seconds = (rec->lastbytetime - rec->firstbytetime) / HZ;
 
 	snd_printk(KERN_DEBUG "STAT: mul_elapsed: %u, mul_elapsed_real: %d, "
-		   "irq_occured: %d\n",
+		   "irq_occurred: %d\n",
 		   rec->mul_elapsed, rec->mul_elapsed_real, rec->irq_occured);
 	snd_printk(KERN_DEBUG "STAT: min_multiple: %d (irqs/period)\n",
 		   rec->min_multiple);

sound/usb/6fire/firmware.c

@@ -350,7 +350,7 @@ static int usb6fire_fw_check(struct usb_interface *intf, const u8 *version)
 		if (!memcmp(version, known_fw_versions + i, 2))
 			return 0;
 
-	dev_err(&intf->dev, "invalid fimware version in device: %4ph. "
+	dev_err(&intf->dev, "invalid firmware version in device: %4ph. "
 			"please reconnect to power. if this failure "
 			"still happens, check your firmware installation.",
 			version);