Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

include/net/sock.h
  7b50ecf ("net: Rename ->stream_memory_read to ->sock_is_readable")
  4c1e34c ("vsock: Enable y2038 safe timeval for timeout")

drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c
  0daa55d ("octeontx2-af: cn10k: debugfs for dumping LMTST map table")
  e77bcdd ("octeontx2-af: Display all enabled PF VF rsrc_alloc entries.")

Adjacent code addition in both cases, keep both.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Documentation/devicetree/bindings/mfd/brcm,cru.yaml

@@ -32,13 +32,13 @@ properties:
   "#size-cells":
     const: 1
 
-  pinctrl:
-    $ref: ../pinctrl/brcm,ns-pinmux.yaml
-
 patternProperties:
   '^clock-controller@[a-f0-9]+$':
     $ref: ../clock/brcm,iproc-clocks.yaml
 
+  '^pin-controller@[a-f0-9]+$':
+    $ref: ../pinctrl/brcm,ns-pinmux.yaml
+
   '^thermal@[a-f0-9]+$':
     $ref: ../thermal/brcm,ns-thermal.yaml
 
@@ -73,9 +73,10 @@ examples:
                                  "iprocfast", "sata1", "sata2";
         };
 
-        pinctrl {
+        pin-controller@1c0 {
             compatible = "brcm,bcm4708-pinmux";
-            offset = <0x1c0>;
+            reg = <0x1c0 0x24>;
+            reg-names = "cru_gpio_control";
         };
 
         thermal@2c0 {

Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml

@@ -17,20 +17,18 @@ description:
 
   A list of pins varies across chipsets so few bindings are available.
 
-  Node of the pinmux must be nested in the CRU (Central Resource Unit) "syscon"
-  node.
-
 properties:
   compatible:
     enum:
       - brcm,bcm4708-pinmux
       - brcm,bcm4709-pinmux
       - brcm,bcm53012-pinmux
 
-  offset:
-    description: offset of pin registers in the CRU block
+  reg:
     maxItems: 1
-    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  reg-names:
+    const: cru_gpio_control
 
 patternProperties:
   '-pins$':
@@ -72,23 +70,20 @@ allOf:
                         uart1_grp ]
 
 required:
-  - offset
+  - reg
+  - reg-names
 
 additionalProperties: false
 
 examples:
   - |
-    cru@1800c100 {
-        compatible = "syscon", "simple-mfd";
-        reg = <0x1800c100 0x1a4>;
-
-        pinctrl {
-            compatible = "brcm,bcm4708-pinmux";
-            offset = <0xc0>;
-
-            spi-pins {
-                function = "spi";
-                groups = "spi_grp";
-            };
+    pin-controller@1800c1c0 {
+        compatible = "brcm,bcm4708-pinmux";
+        reg = <0x1800c1c0 0x24>;
+        reg-names = "cru_gpio_control";
+
+        spi-pins {
+            function = "spi";
+            groups = "spi_grp";
         };
     };

Documentation/userspace-api/ioctl/ioctl-number.rst

@@ -104,6 +104,7 @@ Code  Seq#    Include File                                           Comments
 '8'   all                                                            SNP8023 advanced NIC card
                                                                      <mailto:mcr@solidum.com>
 ';'   64-7F  linux/vfio.h
+'='   00-3f  uapi/linux/ptp_clock.h                                  <mailto:richardcochran@gmail.com>
 '@'   00-0F  linux/radeonfb.h                                        conflict!
 '@'   00-0F  drivers/video/aty/aty128fb.c                            conflict!
 'A'   00-1F  linux/apm_bios.h                                        conflict!

MAINTAINERS

@@ -5464,6 +5464,19 @@ F:	include/net/devlink.h
 F:	include/uapi/linux/devlink.h
 F:	net/core/devlink.c
 
+DH ELECTRONICS IMX6 DHCOM BOARD SUPPORT
+M:	Christoph Niedermaier <cniedermaier@dh-electronics.com>
+L:	kernel@dh-electronics.com
+S:	Maintained
+F:	arch/arm/boot/dts/imx6*-dhcom-*
+
+DH ELECTRONICS STM32MP1 DHCOM/DHCOR BOARD SUPPORT
+M:	Marek Vasut <marex@denx.de>
+L:	kernel@dh-electronics.com
+S:	Maintained
+F:	arch/arm/boot/dts/stm32mp1*-dhcom-*
+F:	arch/arm/boot/dts/stm32mp1*-dhcor-*
+
 DIALOG SEMICONDUCTOR DRIVERS
 M:	Support Opensource <support.opensource@diasemi.com>
 S:	Supported
@@ -11284,7 +11297,6 @@ F:	Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst
 F:	drivers/net/ethernet/marvell/octeontx2/af/
 
 MARVELL PRESTERA ETHERNET SWITCH DRIVER
-M:	Vadym Kochan <vkochan@marvell.com>
 M:	Taras Chornyi <tchornyi@marvell.com>
 S:	Supported
 W:	https://github.com/Marvell-switching/switchdev-prestera
@@ -20352,6 +20364,7 @@ X86 ARCHITECTURE (32-BIT AND 64-BIT)
 M:	Thomas Gleixner <tglx@linutronix.de>
 M:	Ingo Molnar <mingo@redhat.com>
 M:	Borislav Petkov <bp@alien8.de>
+M:	Dave Hansen <dave.hansen@linux.intel.com>
 M:	x86@kernel.org
 R:	"H. Peter Anvin" <hpa@zytor.com>
 L:	linux-kernel@vger.kernel.org

Makefile

@@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 15
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Opossums on Parade
 
 # *DOCUMENTATION*

arch/arm/Kconfig

@@ -92,6 +92,7 @@ config ARM
 	select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL
 	select HAVE_FUNCTION_GRAPH_TRACER if !THUMB2_KERNEL && !CC_IS_CLANG
 	select HAVE_FUNCTION_TRACER if !XIP_KERNEL
+	select HAVE_FUTEX_CMPXCHG if FUTEX
 	select HAVE_GCC_PLUGINS
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)
 	select HAVE_IRQ_TIME_ACCOUNTING

arch/arm/boot/compressed/decompress.c

@@ -47,7 +47,10 @@ extern char * strchrnul(const char *, int);
 #endif
 
 #ifdef CONFIG_KERNEL_XZ
+/* Prevent KASAN override of string helpers in decompressor */
+#undef memmove
 #define memmove memmove
+#undef memcpy
 #define memcpy memcpy
 #include "../../../../lib/decompress_unxz.c"
 #endif

arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts

@@ -112,7 +112,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 

arch/arm/include/asm/uaccess.h

@@ -176,6 +176,7 @@ extern int __get_user_64t_4(void *);
 		register unsigned long __l asm("r1") = __limit;		\
 		register int __e asm("r0");				\
 		unsigned int __ua_flags = uaccess_save_and_enable();	\
+		int __tmp_e;						\
 		switch (sizeof(*(__p))) {				\
 		case 1:							\
 			if (sizeof((x)) >= 8)				\
@@ -203,9 +204,10 @@ extern int __get_user_64t_4(void *);
 			break;						\
 		default: __e = __get_user_bad(); break;			\
 		}							\
+		__tmp_e = __e;						\
 		uaccess_restore(__ua_flags);				\
 		x = (typeof(*(p))) __r2;				\
-		__e;							\
+		__tmp_e;						\
 	})
 
 #define get_user(x, p)							\

arch/arm/kernel/head.S

@@ -253,7 +253,7 @@ __create_page_tables:
 	add	r0, r4, #KERNEL_OFFSET >> (SECTION_SHIFT - PMD_ORDER)
 	ldr	r6, =(_end - 1)
 	adr_l	r5, kernel_sec_start		@ _pa(kernel_sec_start)
-#ifdef CONFIG_CPU_ENDIAN_BE8
+#if defined CONFIG_CPU_ENDIAN_BE8 || defined CONFIG_CPU_ENDIAN_BE32
 	str	r8, [r5, #4]			@ Save physical start of kernel (BE)
 #else
 	str	r8, [r5]			@ Save physical start of kernel (LE)
@@ -266,7 +266,7 @@ __create_page_tables:
 	bls	1b
 	eor	r3, r3, r7			@ Remove the MMU flags
 	adr_l	r5, kernel_sec_end		@ _pa(kernel_sec_end)
-#ifdef CONFIG_CPU_ENDIAN_BE8
+#if defined CONFIG_CPU_ENDIAN_BE8 || defined CONFIG_CPU_ENDIAN_BE32
 	str	r3, [r5, #4]			@ Save physical end of kernel (BE)
 #else
 	str	r3, [r5]			@ Save physical end of kernel (LE)

arch/arm/kernel/traps.c

@@ -136,7 +136,7 @@ static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
 		for (p = first, i = 0; i < 8 && p < top; i++, p += 4) {
 			if (p >= bottom && p < top) {
 				unsigned long val;
-				if (get_kernel_nofault(val, (unsigned long *)p))
+				if (!get_kernel_nofault(val, (unsigned long *)p))
 					sprintf(str + i * 9, " %08lx", val);
 				else
 					sprintf(str + i * 9, " ????????");

arch/arm/kernel/vmlinux-xip.lds.S

@@ -40,6 +40,10 @@ SECTIONS
 		ARM_DISCARD
 		*(.alt.smp.init)
 		*(.pv_table)
+#ifndef CONFIG_ARM_UNWIND
+		*(.ARM.exidx) *(.ARM.exidx.*)
+		*(.ARM.extab) *(.ARM.extab.*)
+#endif
 	}
 
 	. = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
@@ -172,7 +176,7 @@ ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined")
 ASSERT((_end - __bss_start) >= 12288, ".bss too small for CONFIG_XIP_DEFLATED_DATA")
 #endif
 
-#ifdef CONFIG_ARM_MPU
+#if defined(CONFIG_ARM_MPU) && !defined(CONFIG_COMPILE_TEST)
 /*
  * Due to PMSAv7 restriction on base address and size we have to
  * enforce minimal alignment restrictions. It was seen that weaker

arch/arm/mm/proc-macros.S

@@ -340,6 +340,7 @@ ENTRY(\name\()_cache_fns)
 
 .macro define_tlb_functions name:req, flags_up:req, flags_smp
 	.type	\name\()_tlb_fns, #object
+	.align 2
 ENTRY(\name\()_tlb_fns)
 	.long	\name\()_flush_user_tlb_range
 	.long	\name\()_flush_kern_tlb_range

arch/arm/probes/kprobes/core.c

@@ -439,7 +439,7 @@ static struct undef_hook kprobes_arm_break_hook = {
 
 #endif /* !CONFIG_THUMB2_KERNEL */
 
-int __init arch_init_kprobes()
+int __init arch_init_kprobes(void)
 {
 	arm_probes_decode_init();
 #ifdef CONFIG_THUMB2_KERNEL

arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts

@@ -75,7 +75,7 @@
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 

arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts

@@ -70,7 +70,9 @@
 		regulator-name = "rst-usb-eth2";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb_eth2>;
-		gpio = <&gpio3 2 GPIO_ACTIVE_LOW>;
+		gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
 	};
 
 	reg_vdd_5v: regulator-5v {
@@ -95,7 +97,7 @@
 		clocks = <&osc_can>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
-		spi-max-frequency = <100000>;
+		spi-max-frequency = <10000000>;
 		vdd-supply = <&reg_vdd_3v3>;
 		xceiver-supply = <&reg_vdd_5v>;
 	};
@@ -111,7 +113,7 @@
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-connection-type = "rgmii";
+	phy-connection-type = "rgmii-rxid";
 	phy-handle = <&ethphy>;
 	status = "okay";
 

arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi

@@ -91,10 +91,12 @@
 			reg_vdd_soc: BUCK1 {
 				regulator-name = "buck1";
 				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <900000>;
+				regulator-max-microvolt = <850000>;
 				regulator-boot-on;
 				regulator-always-on;
 				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <850000>;
+				nxp,dvs-standby-voltage = <800000>;
 			};
 
 			reg_vdd_arm: BUCK2 {
@@ -111,7 +113,7 @@
 			reg_vdd_dram: BUCK3 {
 				regulator-name = "buck3";
 				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <900000>;
+				regulator-max-microvolt = <950000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
@@ -150,7 +152,7 @@
 
 			reg_vdd_snvs: LDO2 {
 				regulator-name = "ldo2";
-				regulator-min-microvolt = <850000>;
+				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <900000>;
 				regulator-boot-on;
 				regulator-always-on;

arch/arm64/boot/dts/qcom/sm8250.dtsi

@@ -2590,9 +2590,10 @@
 			power-domains = <&dispcc MDSS_GDSC>;
 
 			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
 				 <&gcc GCC_DISP_SF_AXI_CLK>,
 				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
-			clock-names = "iface", "nrt_bus", "core";
+			clock-names = "iface", "bus", "nrt_bus", "core";
 
 			assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
 			assigned-clock-rates = <460000000>;

arch/arm64/net/bpf_jit_comp.c

@@ -1136,6 +1136,11 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 	return prog;
 }
 
+u64 bpf_jit_alloc_exec_limit(void)
+{
+	return BPF_JIT_REGION_SIZE;
+}
+
 void *bpf_jit_alloc_exec(unsigned long size)
 {
 	return __vmalloc_node_range(size, PAGE_SIZE, BPF_JIT_REGION_START,

arch/nds32/kernel/ftrace.c

@@ -6,7 +6,7 @@
 
 #ifndef CONFIG_DYNAMIC_FTRACE
 extern void (*ftrace_trace_function)(unsigned long, unsigned long,
-				     struct ftrace_ops*, struct pt_regs*);
+				     struct ftrace_ops*, struct ftrace_regs*);
 extern void ftrace_graph_caller(void);
 
 noinline void __naked ftrace_stub(unsigned long ip, unsigned long parent_ip,

arch/nios2/platform/Kconfig.platform

@@ -37,6 +37,7 @@ config NIOS2_DTB_PHYS_ADDR
 
 config NIOS2_DTB_SOURCE_BOOL
 	bool "Compile and link device tree into kernel image"
+	depends on !COMPILE_TEST
 	help
 	  This allows you to specify a dts (device tree source) file
 	  which will be compiled and linked into the kernel image.

arch/riscv/net/bpf_jit_core.c

@@ -125,7 +125,8 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 
 	if (i == NR_JIT_ITERATIONS) {
 		pr_err("bpf-jit: image did not converge in <%d passes!\n", i);
-		bpf_jit_binary_free(jit_data->header);
+		if (jit_data->header)
+			bpf_jit_binary_free(jit_data->header);
 		prog = orig_prog;
 		goto out_offset;
 	}
@@ -166,6 +167,11 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 	return prog;
 }
 
+u64 bpf_jit_alloc_exec_limit(void)
+{
+	return BPF_JIT_REGION_SIZE;
+}
+
 void *bpf_jit_alloc_exec(unsigned long size)
 {
 	return __vmalloc_node_range(size, PAGE_SIZE, BPF_JIT_REGION_START,

arch/x86/include/asm/kvm_host.h

@@ -702,7 +702,8 @@ struct kvm_vcpu_arch {
 
 	struct kvm_pio_request pio;
 	void *pio_data;
-	void *guest_ins_data;
+	void *sev_pio_data;
+	unsigned sev_pio_count;
 
 	u8 event_exit_inst_len;