Input: synaptics-rmi4 - fix kerneldoc warnings

Fixes the kerneldoc warnings from building the driver with W=1.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201104162427.2984742-2-lee.jones@linaro.org
[dtor: folded together several Lee's patches; added more descriptions]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

drivers/input/rmi4/rmi_bus.c

@@ -286,7 +286,7 @@ void rmi_unregister_function(struct rmi_function *fn)
 /**
  * rmi_register_function_handler - register a handler for an RMI function
  * @handler: RMI handler that should be registered.
- * @module: pointer to module that implements the handler
+ * @owner: pointer to module that implements the handler
  * @mod_name: name of the module implementing the handler
  *
  * This function performs additional setup of RMI function handler and

drivers/input/rmi4/rmi_f01.c

@@ -103,13 +103,15 @@ struct f01_basic_properties {
 #define RMI_F01_CTRL0_CONFIGURED_BIT	BIT(7)
 
 /**
- * @ctrl0 - see the bit definitions above.
- * @doze_interval - controls the interval between checks for finger presence
- * when the touch sensor is in doze mode, in units of 10ms.
- * @wakeup_threshold - controls the capacitance threshold at which the touch
- * sensor will decide to wake up from that low power state.
- * @doze_holdoff - controls how long the touch sensor waits after the last
- * finger lifts before entering the doze state, in units of 100ms.
+ * struct f01_device_control - controls basic sensor functions
+ *
+ * @ctrl0: see the bit definitions above.
+ * @doze_interval: controls the interval between checks for finger presence
+ *	when the touch sensor is in doze mode, in units of 10ms.
+ * @wakeup_threshold: controls the capacitance threshold at which the touch
+ *	sensor will decide to wake up from that low power state.
+ * @doze_holdoff: controls how long the touch sensor waits after the last
+ *	finger lifts before entering the doze state, in units of 100ms.
  */
 struct f01_device_control {
 	u8 ctrl0;

drivers/input/rmi4/rmi_f11.c

@@ -30,12 +30,12 @@
 #define DEFAULT_MIN_ABS_MT_TRACKING_ID 1
 #define DEFAULT_MAX_ABS_MT_TRACKING_ID 10
 
-/** A note about RMI4 F11 register structure.
+/*
+ * A note about RMI4 F11 register structure.
  *
- * The properties for
- * a given sensor are described by its query registers.  The number of query
- * registers and the layout of their contents are described by the F11 device
- * queries as well as the sensor query information.
+ * The properties for a given sensor are described by its query registers.  The
+ * number of query registers and the layout of their contents are described by
+ * the F11 device queries as well as the sensor query information.
  *
  * Similarly, each sensor has control registers that govern its behavior.  The
  * size and layout of the control registers for a given sensor can be determined
@@ -62,8 +62,8 @@
 /* maximum ABS_MT_POSITION displacement (in mm) */
 #define DMAX 10
 
-/**
- * @rezero - writing this to the F11 command register will cause the sensor to
+/*
+ * Writing this to the F11 command register will cause the sensor to
  * calibrate to the current capacitive state.
  */
 #define RMI_F11_REZERO  0x01
@@ -178,135 +178,157 @@
 #define F11_UNIFORM_CLICKPAD 0x02
 
 /**
+ * struct f11_2d_sensor_queries - describes sensor capabilities
+ *
  * Query registers 1 through 4 are always present.
  *
- * @nr_fingers - describes the maximum number of fingers the 2-D sensor
- * supports.
- * @has_rel - the sensor supports relative motion reporting.
- * @has_abs - the sensor supports absolute poition reporting.
- * @has_gestures - the sensor supports gesture reporting.
- * @has_sensitivity_adjust - the sensor supports a global sensitivity
- * adjustment.
- * @configurable - the sensor supports various configuration options.
- * @num_of_x_electrodes -  the maximum number of electrodes the 2-D sensor
- * supports on the X axis.
- * @num_of_y_electrodes -  the maximum number of electrodes the 2-D sensor
- * supports on the Y axis.
- * @max_electrodes - the total number of X and Y electrodes that may be
- * configured.
+ * @nr_fingers: describes the maximum number of fingers the 2-D sensor
+ *	supports.
+ * @has_rel: the sensor supports relative motion reporting.
+ * @has_abs: the sensor supports absolute poition reporting.
+ * @has_gestures: the sensor supports gesture reporting.
+ * @has_sensitivity_adjust: the sensor supports a global sensitivity
+ *	adjustment.
+ * @configurable: the sensor supports various configuration options.
+ * @nr_x_electrodes:  the maximum number of electrodes the 2-D sensor
+ *	supports on the X axis.
+ * @nr_y_electrodes:  the maximum number of electrodes the 2-D sensor
+ *	supports on the Y axis.
+ * @max_electrodes: the total number of X and Y electrodes that may be
+ *	configured.
  *
  * Query 5 is present if the has_abs bit is set.
  *
- * @abs_data_size - describes the format of data reported by the absolute
- * data source.  Only one format (the kind used here) is supported at this
- * time.
- * @has_anchored_finger - then the sensor supports the high-precision second
- * finger tracking provided by the manual tracking and motion sensitivity
- * options.
- * @has_adjust_hyst - the difference between the finger release threshold and
- * the touch threshold.
- * @has_dribble - the sensor supports the generation of dribble interrupts,
- * which may be enabled or disabled with the dribble control bit.
- * @has_bending_correction - Bending related data registers 28 and 36, and
- * control register 52..57 are present.
- * @has_large_object_suppression - control register 58 and data register 28
- * exist.
- * @has_jitter_filter - query 13 and control 73..76 exist.
+ * @abs_data_size: describes the format of data reported by the absolute
+ *	data source.  Only one format (the kind used here) is supported at this
+ *	time.
+ * @has_anchored_finger: then the sensor supports the high-precision second
+ *	finger tracking provided by the manual tracking and motion sensitivity
+ *	options.
+ * @has_adj_hyst: the difference between the finger release threshold and
+ *	the touch threshold.
+ * @has_dribble: the sensor supports the generation of dribble interrupts,
+ *	which may be enabled or disabled with the dribble control bit.
+ * @has_bending_correction: Bending related data registers 28 and 36, and
+ *	control register 52..57 are present.
+ * @has_large_object_suppression: control register 58 and data register 28
+ *	exist.
+ * @has_jitter_filter: query 13 and control 73..76 exist.
+ *
+ * Query 6 is present if the has_rel it is set.
+ *
+ * @f11_2d_query6: this register is reserved.
  *
  * Gesture information queries 7 and 8 are present if has_gestures bit is set.
  *
- * @has_single_tap - a basic single-tap gesture is supported.
- * @has_tap_n_hold - tap-and-hold gesture is supported.
- * @has_double_tap - double-tap gesture is supported.
- * @has_early_tap - early tap is supported and reported as soon as the finger
- * lifts for any tap event that could be interpreted as either a single tap
- * or as the first tap of a double-tap or tap-and-hold gesture.
- * @has_flick - flick detection is supported.
- * @has_press - press gesture reporting is supported.
- * @has_pinch - pinch gesture detection is supported.
- * @has_palm_det - the 2-D sensor notifies the host whenever a large conductive
- * object such as a palm or a cheek touches the 2-D sensor.
- * @has_rotate - rotation gesture detection is supported.
- * @has_touch_shapes - TouchShapes are supported.  A TouchShape is a fixed
- * rectangular area on the sensor that behaves like a capacitive button.
- * @has_scroll_zones - scrolling areas near the sensor edges are supported.
- * @has_individual_scroll_zones - if 1, then 4 scroll zones are supported;
- * if 0, then only two are supported.
- * @has_mf_scroll - the multifinger_scrolling bit will be set when
- * more than one finger is involved in a scrolling action.
+ * @has_single_tap: a basic single-tap gesture is supported.
+ * @has_tap_n_hold: tap-and-hold gesture is supported.
+ * @has_double_tap: double-tap gesture is supported.
+ * @has_early_tap: early tap is supported and reported as soon as the finger
+ *	lifts for any tap event that could be interpreted as either a single
+ *	tap or as the first tap of a double-tap or tap-and-hold gesture.
+ * @has_flick: flick detection is supported.
+ * @has_press: press gesture reporting is supported.
+ * @has_pinch: pinch gesture detection is supported.
+ * @has_chiral: chiral (circular) scrolling  gesture detection is supported.
+ * @has_palm_det: the 2-D sensor notifies the host whenever a large conductive
+ *	object such as a palm or a cheek touches the 2-D sensor.
+ * @has_rotate: rotation gesture detection is supported.
+ * @has_touch_shapes: TouchShapes are supported.  A TouchShape is a fixed
+ *	rectangular area on the sensor that behaves like a capacitive button.
+ * @has_scroll_zones: scrolling areas near the sensor edges are supported.
+ * @has_individual_scroll_zones: if 1, then 4 scroll zones are supported;
+ *	if 0, then only two are supported.
+ * @has_mf_scroll: the multifinger_scrolling bit will be set when
+ *	more than one finger is involved in a scrolling action.
+ * @has_mf_edge_motion: indicates whether multi-finger edge motion gesture
+ *	is supported.
+ * @has_mf_scroll_inertia: indicates whether multi-finger scroll inertia
+ *	feature is supported.
  *
  * Convenience for checking bytes in the gesture info registers.  This is done
  * often enough that we put it here to declutter the conditionals
  *
- * @query7_nonzero - true if none of the query 7 bits are set
- * @query8_nonzero - true if none of the query 8 bits are set
+ * @query7_nonzero: true if none of the query 7 bits are set
+ * @query8_nonzero: true if none of the query 8 bits are set
  *
  * Query 9 is present if the has_query9 is set.
  *
- * @has_pen - detection of a stylus is supported and registers F11_2D_Ctrl20
- * and F11_2D_Ctrl21 exist.
- * @has_proximity - detection of fingers near the sensor is supported and
- * registers F11_2D_Ctrl22 through F11_2D_Ctrl26 exist.
- * @has_palm_det_sensitivity -  the sensor supports the palm detect sensitivity
- * feature and register F11_2D_Ctrl27 exists.
- * @has_two_pen_thresholds - is has_pen is also set, then F11_2D_Ctrl35 exists.
- * @has_contact_geometry - the sensor supports the use of contact geometry to
- * map absolute X and Y target positions and registers F11_2D_Data18
- * through F11_2D_Data27 exist.
+ * @has_pen: detection of a stylus is supported and registers F11_2D_Ctrl20
+ *	and F11_2D_Ctrl21 exist.
+ * @has_proximity: detection of fingers near the sensor is supported and
+ *	registers F11_2D_Ctrl22 through F11_2D_Ctrl26 exist.
+ * @has_palm_det_sensitivity:  the sensor supports the palm detect sensitivity
+ *	feature and register F11_2D_Ctrl27 exists.
+ * @has_suppress_on_palm_detect: the device supports the large object detect
+ *	suppression feature and register F11_2D_Ctrl27 exists.
+ * @has_two_pen_thresholds: if has_pen is also set, then F11_2D_Ctrl35 exists.
+ * @has_contact_geometry: the sensor supports the use of contact geometry to
+ *	map absolute X and Y target positions and registers F11_2D_Data18
+ *	through F11_2D_Data27 exist.
+ * @has_pen_hover_discrimination: if has_pen is also set, then registers
+ *	F11_2D_Data29 through F11_2D_Data31, F11_2D_Ctrl68.*, F11_2D_Ctrl69
+ *	and F11_2D_Ctrl72 exist.
+ * @has_pen_filters: if has_pen is also set, then registers F11_2D_Ctrl70 and
+ *	F11_2D_Ctrl71 exist.
  *
  * Touch shape info (query 10) is present if has_touch_shapes is set.
  *
- * @nr_touch_shapes - the total number of touch shapes supported.
+ * @nr_touch_shapes: the total number of touch shapes supported.
  *
  * Query 11 is present if the has_query11 bit is set in query 0.
  *
- * @has_z_tuning - if set, the sensor supports Z tuning and registers
- * F11_2D_Ctrl29 through F11_2D_Ctrl33 exist.
- * @has_algorithm_selection - controls choice of noise suppression algorithm
- * @has_w_tuning - the sensor supports Wx and Wy scaling and registers
- * F11_2D_Ctrl36 through F11_2D_Ctrl39 exist.
- * @has_pitch_info - the X and Y pitches of the sensor electrodes can be
- * configured and registers F11_2D_Ctrl40 and F11_2D_Ctrl41 exist.
- * @has_finger_size -  the default finger width settings for the
- * sensor can be configured and registers F11_2D_Ctrl42 through F11_2D_Ctrl44
- * exist.
- * @has_segmentation_aggressiveness - the sensor’s ability to distinguish
- * multiple objects close together can be configured and register F11_2D_Ctrl45
- * exists.
- * @has_XY_clip -  the inactive outside borders of the sensor can be
- * configured and registers F11_2D_Ctrl46 through F11_2D_Ctrl49 exist.
- * @has_drumming_filter - the sensor can be configured to distinguish
- * between a fast flick and a quick drumming movement and registers
- * F11_2D_Ctrl50 and F11_2D_Ctrl51 exist.
+ * @has_z_tuning: if set, the sensor supports Z tuning and registers
+ *	F11_2D_Ctrl29 through F11_2D_Ctrl33 exist.
+ * @has_algorithm_selection: controls choice of noise suppression algorithm
+ * @has_w_tuning: the sensor supports Wx and Wy scaling and registers
+ *	F11_2D_Ctrl36 through F11_2D_Ctrl39 exist.
+ * @has_pitch_info: the X and Y pitches of the sensor electrodes can be
+ *	configured and registers F11_2D_Ctrl40 and F11_2D_Ctrl41 exist.
+ * @has_finger_size: the default finger width settings for the sensor
+ *	can be configured and registers F11_2D_Ctrl42 through F11_2D_Ctrl44
+ *	exist.
+ * @has_segmentation_aggressiveness: the sensor’s ability to distinguish
+ *	multiple objects close together can be configured and register
+ *	F11_2D_Ctrl45 exists.
+ * @has_XY_clip: the inactive outside borders of the sensor can be
+ *	configured and registers F11_2D_Ctrl46 through F11_2D_Ctrl49 exist.
+ * @has_drumming_filter: the sensor can be configured to distinguish
+ *	between a fast flick and a quick drumming movement and registers
+ *	F11_2D_Ctrl50 and F11_2D_Ctrl51 exist.
  *
  * Query 12 is present if hasQuery12 bit is set.
  *
- * @has_gapless_finger - control registers relating to gapless finger are
- * present.
- * @has_gapless_finger_tuning - additional control and data registers relating
- * to gapless finger are present.
- * @has_8bit_w - larger W value reporting is supported.
- * @has_adjustable_mapping - TBD
- * @has_info2 - the general info query14 is present
- * @has_physical_props - additional queries describing the physical properties
- * of the sensor are present.
- * @has_finger_limit - indicates that F11 Ctrl 80 exists.
- * @has_linear_coeff - indicates that F11 Ctrl 81 exists.
+ * @has_gapless_finger: control registers relating to gapless finger are
+ *	present.
+ * @has_gapless_finger_tuning: additional control and data registers relating
+ *	to gapless finger are present.
+ * @has_8bit_w: larger W value reporting is supported.
+ * @has_adjustable_mapping: TBD
+ * @has_info2: the general info query14 is present
+ * @has_physical_props: additional queries describing the physical properties
+ *	of the sensor are present.
+ * @has_finger_limit: indicates that F11 Ctrl 80 exists.
+ * @has_linear_coeff_2: indicates that F11 Ctrl 81 exists.
  *
  * Query 13 is present if Query 5's has_jitter_filter bit is set.
- * @jitter_window_size - used by Design Studio 4.
- * @jitter_filter_type - used by Design Studio 4.
+ *
+ * @jitter_window_size: used by Design Studio 4.
+ * @jitter_filter_type: used by Design Studio 4.
  *
  * Query 14 is present if query 12's has_general_info2 flag is set.
  *
- * @light_control - Indicates what light/led control features are present, if
- * any.
- * @is_clear - if set, this is a clear sensor (indicating direct pointing
- * application), otherwise it's opaque (indicating indirect pointing).
- * @clickpad_props - specifies if this is a clickpad, and if so what sort of
- * mechanism it uses
- * @mouse_buttons - specifies the number of mouse buttons present (if any).
- * @has_advanced_gestures - advanced driver gestures are supported.
+ * @light_control: Indicates what light/led control features are present,
+ *	if any.
+ * @is_clear: if set, this is a clear sensor (indicating direct pointing
+ *	application), otherwise it's opaque (indicating indirect pointing).
+ * @clickpad_props: specifies if this is a clickpad, and if so what sort of
+ *	mechanism it uses
+ * @mouse_buttons: specifies the number of mouse buttons present (if any).
+ * @has_advanced_gestures: advanced driver gestures are supported.
+ *
+ * @x_sensor_size_mm: size of the sensor in millimeters on the X axis.
+ * @y_sensor_size_mm: size of the sensor in millimeters on the Y axis.
  */
 struct f11_2d_sensor_queries {
 	/* query1 */

drivers/input/rmi4/rmi_f54.c

@@ -42,6 +42,8 @@
 /**
  * enum rmi_f54_report_type - RMI4 F54 report types
  *
+ * @F54_REPORT_NONE:	No Image Report.
+ *
  * @F54_8BIT_IMAGE:	Normalized 8-Bit Image Report. The capacitance variance
  *			from baseline for each pixel.
  *
@@ -64,6 +66,10 @@
  *			Report. Set Low reference to its minimum value and high
  *			references to its maximum value, then report the raw
  *			capacitance for each pixel.
+ *
+ * @F54_MAX_REPORT_TYPE:
+ *			Maximum number of Report Types.  Used for sanity
+ *			checking.
  */
 enum rmi_f54_report_type {
 	F54_REPORT_NONE = 0,

drivers/input/rmi4/rmi_i2c.c

@@ -17,12 +17,16 @@
  * struct rmi_i2c_xport - stores information for i2c communication
  *
  * @xport: The transport interface structure
+ * @client: The I2C client device structure
  *
  * @page_mutex: Locks current page to avoid changing pages in unexpected ways.
  * @page: Keeps track of the current virtual page
  *
  * @tx_buf: Buffer used for transmitting data to the sensor over i2c.
  * @tx_buf_size: Size of the buffer
+ *
+ * @supplies: Array of voltage regulators
+ * @startup_delay: Milliseconds to pause after powering up the regulators
  */
 struct rmi_i2c_xport {
 	struct rmi_transport_dev xport;