ptp: ptp_clockmatrix: update to support 4.8.7 firmware

With 4.8.7 firmware, adjtime can change delta instead of absolute time,
which greately increases snap accuracy. PPS alignment doesn't have to
be set for every single TOD change. Other minor changes includes:
adding more debug logs, increasing snap accuracy for pre 4.8.7 firmware
and supporting new tcs2bin format.

Signed-off-by: Min Li <min.li.xe@renesas.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/ptp/idt8a340_reg.h

@@ -20,6 +20,10 @@
 #define HW_DPLL_1                         (0x8b00)
 #define HW_DPLL_2                         (0x8c00)
 #define HW_DPLL_3                         (0x8d00)
+#define HW_DPLL_4                         (0x8e00)
+#define HW_DPLL_5                         (0x8f00)
+#define HW_DPLL_6                         (0x9000)
+#define HW_DPLL_7                         (0x9100)
 
 #define HW_DPLL_TOD_SW_TRIG_ADDR__0       (0x080)
 #define HW_DPLL_TOD_CTRL_1                (0x089)
@@ -57,6 +61,43 @@
 #define SYNCTRL1_Q1_DIV_SYNC_TRIG	BIT(1)
 #define SYNCTRL1_Q0_DIV_SYNC_TRIG	BIT(0)
 
+#define HW_Q8_CTRL_SPARE  (0xa7d4)
+#define HW_Q11_CTRL_SPARE (0xa7ec)
+
+/**
+ * Select FOD5 as sync_trigger for Q8 divider.
+ * Transition from logic zero to one
+ * sets trigger to sync Q8 divider.
+ *
+ * Unused when FOD4 is driving Q8 divider (normal operation).
+ */
+#define Q9_TO_Q8_SYNC_TRIG  BIT(1)
+
+/**
+ * Enable FOD5 as driver for clock and sync for Q8 divider.
+ * Enable fanout buffer for FOD5.
+ *
+ * Unused when FOD4 is driving Q8 divider (normal operation).
+ */
+#define Q9_TO_Q8_FANOUT_AND_CLOCK_SYNC_ENABLE_MASK  (BIT(0) | BIT(2))
+
+/**
+ * Select FOD6 as sync_trigger for Q11 divider.
+ * Transition from logic zero to one
+ * sets trigger to sync Q11 divider.
+ *
+ * Unused when FOD7 is driving Q11 divider (normal operation).
+ */
+#define Q10_TO_Q11_SYNC_TRIG  BIT(1)
+
+/**
+ * Enable FOD6 as driver for clock and sync for Q11 divider.
+ * Enable fanout buffer for FOD6.
+ *
+ * Unused when FOD7 is driving Q11 divider (normal operation).
+ */
+#define Q10_TO_Q11_FANOUT_AND_CLOCK_SYNC_ENABLE_MASK  (BIT(0) | BIT(2))
+
 #define RESET_CTRL                        0xc000
 #define SM_RESET                          0x0012
 #define SM_RESET_CMD                      0x5A
@@ -191,6 +232,7 @@
 
 #define DPLL_CTRL_0                       0xc600
 #define DPLL_CTRL_DPLL_MANU_REF_CFG       0x0001
+#define DPLL_CTRL_COMBO_MASTER_CFG        0x003a
 
 #define DPLL_CTRL_1                       0xc63c
 
@@ -646,6 +688,9 @@
 /* Bit definitions for the TOD_WRITE_CMD register */
 #define TOD_WRITE_SELECTION_SHIFT         (0)
 #define TOD_WRITE_SELECTION_MASK          (0xf)
+/* 4.8.7 */
+#define TOD_WRITE_TYPE_SHIFT              (4)
+#define TOD_WRITE_TYPE_MASK               (0x3)
 
 /* Bit definitions for the TOD_READ_PRIMARY_SEL_CFG_0 register */
 #define RD_PWM_DECODER_INDEX_SHIFT        (4)
@@ -658,4 +703,7 @@
 #define TOD_READ_TRIGGER_SHIFT            (0)
 #define TOD_READ_TRIGGER_MASK             (0xf)
 
+/* Bit definitions for the DPLL_CTRL_COMBO_MASTER_CFG register */
+#define COMBO_MASTER_HOLD                 BIT(0)
+
 #endif