Merge tag 'tty-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/gregkh/tty

Pull tty/serial fixes from Greg KH:
 "Here are some small tty/serial driver fixes for 4.10-rc4 to resolve a
  number of reported issues.

  Nothing major here at all, one revert of a problematic patch, and some
  other tiny bugfixes. Full details are in the shortlog below.

  All have been in linux-next with no reported issues"

* tag 'tty-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  sysrq: attach sysrq handler correctly for 32-bit kernel
  Revert "tty: serial: 8250: add CON_CONSDEV to flags"
  Clearing FIFOs in RS485 emulation mode causes subsequent transmits to break
  8250_pci: Fix potential use-after-free in error path
  tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done
  tty/serial: atmel_serial: BUG: stop DMA from transmitting in stop_tx

drivers/tty/serial/8250/8250_core.c

@@ -675,7 +675,7 @@ static struct console univ8250_console = {
 	.device		= uart_console_device,
 	.setup		= univ8250_console_setup,
 	.match		= univ8250_console_match,
-	.flags		= CON_PRINTBUFFER | CON_ANYTIME | CON_CONSDEV,
+	.flags		= CON_PRINTBUFFER | CON_ANYTIME,
 	.index		= -1,
 	.data		= &serial8250_reg,
 };

drivers/tty/serial/8250/8250_pci.c

@@ -5642,17 +5642,15 @@ static pci_ers_result_t serial8250_io_slot_reset(struct pci_dev *dev)
 static void serial8250_io_resume(struct pci_dev *dev)
 {
 	struct serial_private *priv = pci_get_drvdata(dev);
-	const struct pciserial_board *board;
+	struct serial_private *new;
 
 	if (!priv)
 		return;
 
-	board = priv->board;
-	kfree(priv);
-	priv = pciserial_init_ports(dev, board);
-
-	if (!IS_ERR(priv)) {
-		pci_set_drvdata(dev, priv);
+	new = pciserial_init_ports(dev, priv->board);
+	if (!IS_ERR(new)) {
+		pci_set_drvdata(dev, new);
+		kfree(priv);
 	}
 }
 

drivers/tty/serial/8250/8250_port.c

@@ -1413,7 +1413,7 @@ static void __do_stop_tx_rs485(struct uart_8250_port *p)
 	 * Enable previously disabled RX interrupts.
 	 */
 	if (!(p->port.rs485.flags & SER_RS485_RX_DURING_TX)) {
-		serial8250_clear_fifos(p);
+		serial8250_clear_and_reinit_fifos(p);
 
 		p->ier |= UART_IER_RLSI | UART_IER_RDI;
 		serial_port_out(&p->port, UART_IER, p->ier);

drivers/tty/serial/atmel_serial.c

@@ -481,6 +481,14 @@ static void atmel_stop_tx(struct uart_port *port)
 		/* disable PDC transmit */
 		atmel_uart_writel(port, ATMEL_PDC_PTCR, ATMEL_PDC_TXTDIS);
 	}
+
+	/*
+	 * Disable the transmitter.
+	 * This is mandatory when DMA is used, otherwise the DMA buffer
+	 * is fully transmitted.
+	 */
+	atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXDIS);
+
 	/* Disable interrupts */
 	atmel_uart_writel(port, ATMEL_US_IDR, atmel_port->tx_done_mask);
 
@@ -513,6 +521,9 @@ static void atmel_start_tx(struct uart_port *port)
 
 	/* Enable interrupts */
 	atmel_uart_writel(port, ATMEL_US_IER, atmel_port->tx_done_mask);
+
+	/* re-enable the transmitter */
+	atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN);
 }
 
 /*
@@ -798,6 +809,11 @@ static void atmel_complete_tx_dma(void *arg)
 	 */
 	if (!uart_circ_empty(xmit))
 		atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx);
+	else if ((port->rs485.flags & SER_RS485_ENABLED) &&
+		 !(port->rs485.flags & SER_RS485_RX_DURING_TX)) {
+		/* DMA done, stop TX, start RX for RS485 */
+		atmel_start_rx(port);
+	}
 
 	spin_unlock_irqrestore(&port->lock, flags);
 }
@@ -900,12 +916,6 @@ static void atmel_tx_dma(struct uart_port *port)
 		desc->callback = atmel_complete_tx_dma;
 		desc->callback_param = atmel_port;
 		atmel_port->cookie_tx = dmaengine_submit(desc);
-
-	} else {
-		if (port->rs485.flags & SER_RS485_ENABLED) {
-			/* DMA done, stop TX, start RX for RS485 */
-			atmel_start_rx(port);
-		}
 	}
 
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)

drivers/tty/sysrq.c

@@ -946,8 +946,8 @@ static const struct input_device_id sysrq_ids[] = {
 	{
 		.flags = INPUT_DEVICE_ID_MATCH_EVBIT |
 				INPUT_DEVICE_ID_MATCH_KEYBIT,
-		.evbit = { BIT_MASK(EV_KEY) },
-		.keybit = { BIT_MASK(KEY_LEFTALT) },
+		.evbit = { [BIT_WORD(EV_KEY)] = BIT_MASK(EV_KEY) },
+		.keybit = { [BIT_WORD(KEY_LEFTALT)] = BIT_MASK(KEY_LEFTALT) },
 	},
 	{ },
 };