Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (220 commits)
  USB: backlight, appledisplay: fix incomplete registration failure handling
  USB: pl2303: remove unnecessary reset of usb_device in urbs
  USB: ftdi_sio: remove obsolete check in unthrottle
  USB: ftdi_sio: remove unused tx_bytes counter
  USB: qcaux: driver for auxiliary serial ports on Qualcomm devices
  USB: pl2303: initial TIOCGSERIAL support
  USB: option: add Longcheer/Longsung vendor ID
  USB: fix I2C API usage in ohci-pnx4008.
  USB: usbmon: mask seconds properly in text API
  USB: sisusbvga: no unnecessary GFP_ATOMIC
  USB: storage: onetouch: unnecessary GFP_ATOMIC
  USB: serial: ftdi: add CONTEC vendor and product id
  USB: remove references to port->port.count from the serial drivers
  USB: tty: Prune uses of tty_request_room in the USB layer
  USB: tty: Add a function to insert a string of characters with the same flag
  USB: don't read past config->interface[] if usb_control_msg() fails in usb_reset_configuration()
  USB: tty: kill request_room for USB ACM class
  USB: tty: sort out the request_room handling for whiteheat
  USB: storage: fix misplaced parenthesis
  USB: vstusb.c: removal of driver for Vernier Software & Technology, Inc., devices and spectrometers
  ...

Documentation/ABI/testing/sysfs-bus-usb

@@ -159,3 +159,14 @@ Description:
 		device.  This is useful to ensure auto probing won't
 		match the driver to the device.  For example:
 		# echo "046d c315" > /sys/bus/usb/drivers/foo/remove_id
+
+What:		/sys/bus/usb/device/.../avoid_reset
+Date:		December 2009
+Contact:	Oliver Neukum <oliver@neukum.org>
+Description:
+		Writing 1 to this file tells the kernel that this
+		device will morph into another mode when it is reset.
+		Drivers will not use reset for error handling for
+		such devices.
+Users:
+		usb_modeswitch

Documentation/ioctl/ioctl-number.txt

@@ -139,7 +139,6 @@ Code  Seq#(hex)	Include File		Comments
 'K'	all	linux/kd.h
 'L'	00-1F	linux/loop.h		conflict!
 'L'	10-1F	drivers/scsi/mpt2sas/mpt2sas_ctl.h	conflict!
-'L'	20-2F	linux/usb/vstusb.h
 'L'	E0-FF	linux/ppdd.h		encrypted disk device driver
 					<http://linux01.gwdg.de/~alatham/ppdd.html>
 'M'	all	linux/soundcard.h	conflict!

Documentation/networking/00-INDEX

@@ -32,6 +32,8 @@ cs89x0.txt
 	- the Crystal LAN (CS8900/20-based) Ethernet ISA adapter driver
 cxacru.txt
 	- Conexant AccessRunner USB ADSL Modem
+cxacru-cf.py
+	- Conexant AccessRunner USB ADSL Modem configuration file parser
 de4x5.txt
 	- the Digital EtherWORKS DE4?? and DE5?? PCI Ethernet driver
 decnet.txt

Documentation/networking/cxacru-cf.py

@@ -0,0 +1,48 @@
+#!/usr/bin/env python
+# Copyright 2009 Simon Arlott
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the Free
+# Software Foundation; either version 2 of the License, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program; if not, write to the Free Software Foundation, Inc., 59
+# Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+#
+# Usage: cxacru-cf.py < cxacru-cf.bin
+# Output: values string suitable for the sysfs adsl_config attribute
+#
+# Warning: cxacru-cf.bin with MD5 hash cdbac2689969d5ed5d4850f117702110
+# contains mis-aligned values which will stop the modem from being able
+# to make a connection. If the first and last two bytes are removed then
+# the values become valid, but the modulation will be forced to ANSI
+# T1.413 only which may not be appropriate.
+#
+# The original binary format is a packed list of le32 values.
+
+import sys
+import struct
+
+i = 0
+while True:
+	buf = sys.stdin.read(4)
+
+	if len(buf) == 0:
+		break
+	elif len(buf) != 4:
+		sys.stdout.write("\n")
+		sys.stderr.write("Error: read {0} not 4 bytes\n".format(len(buf)))
+		sys.exit(1)
+
+	if i > 0:
+		sys.stdout.write(" ")
+	sys.stdout.write("{0:x}={1}".format(i, struct.unpack("<I", buf)[0]))
+	i += 1
+
+sys.stdout.write("\n")

Documentation/networking/cxacru.txt

@@ -4,6 +4,12 @@ While it is capable of managing/maintaining the ADSL connection without the
 module loaded, the device will sometimes stop responding after unloading the
 driver and it is necessary to unplug/remove power to the device to fix this.
 
+Note: support for cxacru-cf.bin has been removed. It was not loaded correctly
+so it had no effect on the device configuration. Fixing it could have stopped
+existing devices working when an invalid configuration is supplied.
+
+There is a script cxacru-cf.py to convert an existing file to the sysfs form.
+
 Detected devices will appear as ATM devices named "cxacru". In /sys/class/atm/
 these are directories named cxacruN where N is the device number. A symlink
 named device points to the USB interface device's directory which contains
@@ -15,6 +21,15 @@ several sysfs attribute files for retrieving device statistics:
 * adsl_headend_environment
 	Information about the remote headend.
 
+* adsl_config
+	Configuration writing interface.
+	Write parameters in hexadecimal format <index>=<value>,
+	separated by whitespace, e.g.:
+		"1=0 a=5"
+	Up to 7 parameters at a time will be sent and the modem will restart
+	the ADSL connection when any value is set. These are logged for future
+	reference.
+
 * downstream_attenuation (dB)
 * downstream_bits_per_frame
 * downstream_rate (kbps)
@@ -61,6 +76,7 @@ several sysfs attribute files for retrieving device statistics:
 * mac_address
 
 * modulation
+	"" (when not connected)
 	"ANSI T1.413"
 	"ITU-T G.992.1 (G.DMT)"
 	"ITU-T G.992.2 (G.LITE)"

Documentation/usb/error-codes.txt

@@ -41,8 +41,8 @@ USB-specific:
 
 -EFBIG		Host controller driver can't schedule that many ISO frames.
 
--EPIPE		Specified endpoint is stalled.  For non-control endpoints,
-		reset this status with usb_clear_halt().
+-EPIPE		The pipe type specified in the URB doesn't match the
+		endpoint's actual type.
 
 -EMSGSIZE	(a) endpoint maxpacket size is zero; it is not usable
 		    in the current interface altsetting.
@@ -60,6 +60,8 @@ USB-specific:
 
 -EHOSTUNREACH	URB was rejected because the device is suspended.
 
+-ENOEXEC	A control URB doesn't contain a Setup packet.
+
 
 **************************************************************************
 *                   Error codes returned by in urb->status               *