Merge branch 'tip/perf/urgent' of git://git.kernel.org/pub/scm/linux/…

…kernel/git/rostedt/linux-2.6-trace into perf/core

Documentation/sound/alsa/SB-Live-mixer.txt

@@ -87,14 +87,14 @@ accumulator. ALSA uses accumulators 0 and 1 for left and right PCM.
 The result is forwarded to the ADC capture FIFO (thus to the standard capture
 PCM device).
 
-name='Music Playback Volume',index=0
+name='Synth Playback Volume',index=0
 
 This control is used to attenuate samples for left and right MIDI FX-bus
 accumulators. ALSA uses accumulators 4 and 5 for left and right MIDI samples.
 The result samples are forwarded to the front DAC PCM slots of the AC97 codec.
 
-name='Music Capture Volume',index=0
-name='Music Capture Switch',index=0
+name='Synth Capture Volume',index=0
+name='Synth Capture Switch',index=0
 
 These controls are used to attenuate samples for left and right MIDI FX-bus
 accumulator. ALSA uses accumulators 4 and 5 for left and right PCM.

MAINTAINERS

@@ -5396,7 +5396,7 @@ F:	drivers/media/video/*7146*
 F:	include/media/*7146*
 
 SAMSUNG AUDIO (ASoC) DRIVERS
-M:	Jassi Brar <jassi.brar@samsung.com>
+M:	Jassi Brar <jassisinghbrar@gmail.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Supported
 F:	sound/soc/samsung

arch/arm/mach-s3c2440/mach-gta02.c

@@ -409,6 +409,10 @@ struct platform_device s3c24xx_pwm_device = {
 	.num_resources	= 0,
 };
 
+static struct platform_device gta02_dfbmcs320_device = {
+	.name = "dfbmcs320",
+};
+
 static struct i2c_board_info gta02_i2c_devs[] __initdata = {
 	{
 		I2C_BOARD_INFO("pcf50633", 0x73),
@@ -523,6 +527,7 @@ static struct platform_device *gta02_devices[] __initdata = {
 	&s3c_device_iis,
 	&samsung_asoc_dma,
 	&s3c_device_i2c0,
+	&gta02_dfbmcs320_device,
 	&gta02_buttons_device,
 	&s3c_device_adc,
 	&s3c_device_ts,

arch/arm/mach-ux500/board-mop500.c

@@ -178,16 +178,15 @@ static struct i2c_board_info __initdata mop500_i2c0_devices[] = {
 		.irq		= NOMADIK_GPIO_TO_IRQ(217),
 		.platform_data  = &mop500_tc35892_data,
 	},
-};
-
-/* I2C0 devices only available prior to HREFv60 */
-static struct i2c_board_info __initdata mop500_i2c0_old_devices[] = {
+	/* I2C0 devices only available prior to HREFv60 */
 	{
 		I2C_BOARD_INFO("tps61052", 0x33),
 		.platform_data  = &mop500_tps61052_data,
 	},
 };
 
+#define NUM_PRE_V60_I2C0_DEVICES 1
+
 static struct i2c_board_info __initdata mop500_i2c2_devices[] = {
 	{
 		/* lp5521 LED driver, 1st device */
@@ -425,6 +424,8 @@ static void __init mop500_uart_init(void)
 
 static void __init mop500_init_machine(void)
 {
+	int i2c0_devs;
+
 	/*
 	 * The HREFv60 board removed a GPIO expander and routed
 	 * all these GPIO pins to the internal GPIO controller
@@ -448,11 +449,11 @@ static void __init mop500_init_machine(void)
 
 	platform_device_register(&ab8500_device);
 
-	i2c_register_board_info(0, mop500_i2c0_devices,
-				ARRAY_SIZE(mop500_i2c0_devices));
-	if (!machine_is_hrefv60())
-		i2c_register_board_info(0, mop500_i2c0_old_devices,
-					ARRAY_SIZE(mop500_i2c0_old_devices));
+	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
+	if (machine_is_hrefv60())
+		i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
+
+	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
 	i2c_register_board_info(2, mop500_i2c2_devices,
 				ARRAY_SIZE(mop500_i2c2_devices));
 }

arch/x86/kernel/apm_32.c

@@ -228,6 +228,7 @@
 #include <linux/kthread.h>
 #include <linux/jiffies.h>
 #include <linux/acpi.h>
+#include <linux/syscore_ops.h>
 
 #include <asm/system.h>
 #include <asm/uaccess.h>
@@ -1238,6 +1239,7 @@ static int suspend(int vetoable)
 
 	local_irq_disable();
 	sysdev_suspend(PMSG_SUSPEND);
+	syscore_suspend();
 
 	local_irq_enable();
 
@@ -1255,6 +1257,7 @@ static int suspend(int vetoable)
 		apm_error("suspend", err);
 	err = (err == APM_SUCCESS) ? 0 : -EIO;
 
+	syscore_resume();
 	sysdev_resume();
 	local_irq_enable();
 
@@ -1280,13 +1283,15 @@ static void standby(void)
 
 	local_irq_disable();
 	sysdev_suspend(PMSG_SUSPEND);
+	syscore_suspend();
 	local_irq_enable();
 
 	err = set_system_power_state(APM_STATE_STANDBY);
 	if ((err != APM_SUCCESS) && (err != APM_NO_ERROR))
 		apm_error("standby", err);
 
 	local_irq_disable();
+	syscore_resume();
 	sysdev_resume();
 	local_irq_enable();
 

arch/x86/kernel/cpu/perf_event.c

@@ -593,8 +593,12 @@ static int x86_setup_perfctr(struct perf_event *event)
 			return -EOPNOTSUPP;
 	}
 
+	/*
+	 * Do not allow config1 (extended registers) to propagate,
+	 * there's no sane user-space generalization yet:
+	 */
 	if (attr->type == PERF_TYPE_RAW)
-		return x86_pmu_extra_regs(event->attr.config, event);
+		return 0;
 
 	if (attr->type == PERF_TYPE_HW_CACHE)
 		return set_ext_hw_attr(hwc, event);
@@ -616,8 +620,8 @@ static int x86_setup_perfctr(struct perf_event *event)
 	/*
 	 * Branch tracing:
 	 */
-	if ((attr->config == PERF_COUNT_HW_BRANCH_INSTRUCTIONS) &&
-	    (hwc->sample_period == 1)) {
+	if (attr->config == PERF_COUNT_HW_BRANCH_INSTRUCTIONS &&
+	    !attr->freq && hwc->sample_period == 1) {
 		/* BTS is not supported by this architecture. */
 		if (!x86_pmu.bts_active)
 			return -EOPNOTSUPP;
@@ -1291,6 +1295,16 @@ static int x86_pmu_handle_irq(struct pt_regs *regs)
 
 	cpuc = &__get_cpu_var(cpu_hw_events);
 
+	/*
+	 * Some chipsets need to unmask the LVTPC in a particular spot
+	 * inside the nmi handler.  As a result, the unmasking was pushed
+	 * into all the nmi handlers.
+	 *
+	 * This generic handler doesn't seem to have any issues where the
+	 * unmasking occurs so it was left at the top.
+	 */
+	apic_write(APIC_LVTPC, APIC_DM_NMI);
+
 	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
 		if (!test_bit(idx, cpuc->active_mask)) {
 			/*
@@ -1377,8 +1391,6 @@ perf_event_nmi_handler(struct notifier_block *self,
 		return NOTIFY_DONE;
 	}
 
-	apic_write(APIC_LVTPC, APIC_DM_NMI);
-
 	handled = x86_pmu.handle_irq(args->regs);
 	if (!handled)
 		return NOTIFY_DONE;

arch/x86/kernel/cpu/perf_event_intel.c

@@ -25,7 +25,7 @@ struct intel_percore {
 /*
  * Intel PerfMon, used on Core and later.
  */
-static const u64 intel_perfmon_event_map[] =
+static u64 intel_perfmon_event_map[PERF_COUNT_HW_MAX] __read_mostly =
 {
   [PERF_COUNT_HW_CPU_CYCLES]		= 0x003c,
   [PERF_COUNT_HW_INSTRUCTIONS]		= 0x00c0,
@@ -391,12 +391,12 @@ static __initconst const u64 nehalem_hw_cache_event_ids
 {
  [ C(L1D) ] = {
 	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0f40, /* L1D_CACHE_LD.MESI            */
-		[ C(RESULT_MISS)   ] = 0x0140, /* L1D_CACHE_LD.I_STATE         */
+		[ C(RESULT_ACCESS) ] = 0x010b, /* MEM_INST_RETIRED.LOADS       */
+		[ C(RESULT_MISS)   ] = 0x0151, /* L1D.REPL                     */
 	},
 	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0f41, /* L1D_CACHE_ST.MESI            */
-		[ C(RESULT_MISS)   ] = 0x0141, /* L1D_CACHE_ST.I_STATE         */
+		[ C(RESULT_ACCESS) ] = 0x020b, /* MEM_INST_RETURED.STORES      */
+		[ C(RESULT_MISS)   ] = 0x0251, /* L1D.M_REPL                   */
 	},
 	[ C(OP_PREFETCH) ] = {
 		[ C(RESULT_ACCESS) ] = 0x014e, /* L1D_PREFETCH.REQUESTS        */
@@ -933,6 +933,16 @@ static int intel_pmu_handle_irq(struct pt_regs *regs)
 
 	cpuc = &__get_cpu_var(cpu_hw_events);
 
+	/*
+	 * Some chipsets need to unmask the LVTPC in a particular spot
+	 * inside the nmi handler.  As a result, the unmasking was pushed
+	 * into all the nmi handlers.
+	 *
+	 * This handler doesn't seem to have any issues with the unmasking
+	 * so it was left at the top.
+	 */
+	apic_write(APIC_LVTPC, APIC_DM_NMI);
+
 	intel_pmu_disable_all();
 	handled = intel_pmu_drain_bts_buffer();
 	status = intel_pmu_get_status();
@@ -998,6 +1008,9 @@ intel_bts_constraints(struct perf_event *event)
 	struct hw_perf_event *hwc = &event->hw;
 	unsigned int hw_event, bts_event;
 
+	if (event->attr.freq)
+		return NULL;
+
 	hw_event = hwc->config & INTEL_ARCH_EVENT_MASK;
 	bts_event = x86_pmu.event_map(PERF_COUNT_HW_BRANCH_INSTRUCTIONS);
 
@@ -1305,7 +1318,7 @@ static void intel_clovertown_quirks(void)
 	 * AJ106 could possibly be worked around by not allowing LBR
 	 *       usage from PEBS, including the fixup.
 	 * AJ68  could possibly be worked around by always programming
-	 * 	 a pebs_event_reset[0] value and coping with the lost events.
+	 *	 a pebs_event_reset[0] value and coping with the lost events.
 	 *
 	 * But taken together it might just make sense to not enable PEBS on
 	 * these chips.
@@ -1409,6 +1422,18 @@ static __init int intel_pmu_init(void)
 		x86_pmu.percore_constraints = intel_nehalem_percore_constraints;
 		x86_pmu.enable_all = intel_pmu_nhm_enable_all;
 		x86_pmu.extra_regs = intel_nehalem_extra_regs;
+
+		if (ebx & 0x40) {
+			/*
+			 * Erratum AAJ80 detected, we work it around by using
+			 * the BR_MISP_EXEC.ANY event. This will over-count
+			 * branch-misses, but it's still much better than the
+			 * architectural event which is often completely bogus:
+			 */
+			intel_perfmon_event_map[PERF_COUNT_HW_BRANCH_MISSES] = 0x7f89;
+
+			pr_cont("erratum AAJ80 worked around, ");
+		}
 		pr_cont("Nehalem events, ");
 		break;
 
@@ -1425,6 +1450,7 @@ static __init int intel_pmu_init(void)
 
 	case 37: /* 32 nm nehalem, "Clarkdale" */
 	case 44: /* 32 nm nehalem, "Gulftown" */
+	case 47: /* 32 nm Xeon E7 */
 		memcpy(hw_cache_event_ids, westmere_hw_cache_event_ids,
 		       sizeof(hw_cache_event_ids));
 		memcpy(hw_cache_extra_regs, nehalem_hw_cache_extra_regs,

arch/x86/kernel/cpu/perf_event_p4.c

@@ -946,14 +946,23 @@ static int p4_pmu_handle_irq(struct pt_regs *regs)
 		if (!x86_perf_event_set_period(event))
 			continue;
 		if (perf_event_overflow(event, 1, &data, regs))
-			p4_pmu_disable_event(event);
+			x86_pmu_stop(event, 0);
 	}
 
-	if (handled) {
-		/* p4 quirk: unmask it again */
-		apic_write(APIC_LVTPC, apic_read(APIC_LVTPC) & ~APIC_LVT_MASKED);
+	if (handled)
 		inc_irq_stat(apic_perf_irqs);
-	}
+
+	/*
+	 * When dealing with the unmasking of the LVTPC on P4 perf hw, it has
+	 * been observed that the OVF bit flag has to be cleared first _before_
+	 * the LVTPC can be unmasked.
+	 *
+	 * The reason is the NMI line will continue to be asserted while the OVF
+	 * bit is set.  This causes a second NMI to generate if the LVTPC is
+	 * unmasked before the OVF bit is cleared, leading to unknown NMI
+	 * messages.
+	 */
+	apic_write(APIC_LVTPC, APIC_DM_NMI);
 
 	return handled;
 }

arch/xtensa/kernel/irq.c

@@ -64,47 +64,41 @@ asmlinkage void do_IRQ(int irq, struct pt_regs *regs)
 
 int arch_show_interrupts(struct seq_file *p, int prec)
 {
-	int j;
-
-	seq_printf(p, "%*s: ", prec, "NMI");
-	for_each_online_cpu(j)
-		seq_printf(p, "%10u ", nmi_count(j));
-	seq_putc(p, '\n');
 	seq_printf(p, "%*s: ", prec, "ERR");
 	seq_printf(p, "%10u\n", atomic_read(&irq_err_count));
 	return 0;
 }
 
-static void xtensa_irq_mask(struct irq_chip *d)
+static void xtensa_irq_mask(struct irq_data *d)
 {
 	cached_irq_mask &= ~(1 << d->irq);
 	set_sr (cached_irq_mask, INTENABLE);
 }
 
-static void xtensa_irq_unmask(struct irq_chip *d)
+static void xtensa_irq_unmask(struct irq_data *d)
 {
 	cached_irq_mask |= 1 << d->irq;
 	set_sr (cached_irq_mask, INTENABLE);
 }
 
-static void xtensa_irq_enable(struct irq_chip *d)
+static void xtensa_irq_enable(struct irq_data *d)
 {
 	variant_irq_enable(d->irq);
 	xtensa_irq_unmask(d->irq);
 }
 
-static void xtensa_irq_disable(struct irq_chip *d)
+static void xtensa_irq_disable(struct irq_data *d)
 {
 	xtensa_irq_mask(d->irq);
 	variant_irq_disable(d->irq);
 }
 
-static void xtensa_irq_ack(struct irq_chip *d)
+static void xtensa_irq_ack(struct irq_data *d)
 {
 	set_sr(1 << d->irq, INTCLEAR);
 }
 
-static int xtensa_irq_retrigger(struct irq_chip *d)
+static int xtensa_irq_retrigger(struct irq_data *d)
 {
 	set_sr (1 << d->irq, INTSET);
 	return 1;

drivers/ata/ahci.c

@@ -150,7 +150,7 @@ static const struct ata_port_info ahci_port_info[] = {
 	{
 		AHCI_HFLAGS	(AHCI_HFLAG_NO_FPDMA_AA | AHCI_HFLAG_NO_PMP |
 				 AHCI_HFLAG_YES_NCQ),
-		.flags		= AHCI_FLAG_COMMON,
+		.flags		= AHCI_FLAG_COMMON | ATA_FLAG_NO_DIPM,
 		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
@@ -261,6 +261,12 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, 0x1d06), board_ahci }, /* PBG RAID */
 	{ PCI_VDEVICE(INTEL, 0x2826), board_ahci }, /* PBG RAID */
 	{ PCI_VDEVICE(INTEL, 0x2323), board_ahci }, /* DH89xxCC AHCI */
+	{ PCI_VDEVICE(INTEL, 0x1e02), board_ahci }, /* Panther Point AHCI */
+	{ PCI_VDEVICE(INTEL, 0x1e03), board_ahci }, /* Panther Point AHCI */
+	{ PCI_VDEVICE(INTEL, 0x1e04), board_ahci }, /* Panther Point RAID */
+	{ PCI_VDEVICE(INTEL, 0x1e05), board_ahci }, /* Panther Point RAID */
+	{ PCI_VDEVICE(INTEL, 0x1e06), board_ahci }, /* Panther Point RAID */
+	{ PCI_VDEVICE(INTEL, 0x1e07), board_ahci }, /* Panther Point RAID */
 
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
 	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,

drivers/ata/ahci.h

@@ -229,6 +229,10 @@ enum {
 	EM_CTL_ALHD		= (1 << 26), /* Activity LED */
 	EM_CTL_XMT		= (1 << 25), /* Transmit Only */
 	EM_CTL_SMB		= (1 << 24), /* Single Message Buffer */
+	EM_CTL_SGPIO		= (1 << 19), /* SGPIO messages supported */
+	EM_CTL_SES		= (1 << 18), /* SES-2 messages supported */
+	EM_CTL_SAFTE		= (1 << 17), /* SAF-TE messages supported */
+	EM_CTL_LED		= (1 << 16), /* LED messages supported */
 
 	/* em message type */
 	EM_MSG_TYPE_LED		= (1 << 0), /* LED */