Merge git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core

Documentation/admin-guide/kernel-parameters.txt

@@ -1713,6 +1713,13 @@
 	irqaffinity=	[SMP] Set the default irq affinity mask
 			The argument is a cpu list, as described above.
 
+	irqchip.gicv2_force_probe=
+			[ARM, ARM64]
+			Format: <bool>
+			Force the kernel to look for the second 4kB page
+			of a GICv2 controller even if the memory range
+			exposed by the device tree is too small.
+
 	irqfixup	[HW]
 			When an interrupt is not handled search all handlers
 			for it. Intended to get systems with badly broken

Documentation/arm64/silicon-errata.txt

@@ -70,6 +70,7 @@ stable kernels.
 |                |                 |                 |                             |
 | Hisilicon      | Hip0{5,6,7}     | #161010101      | HISILICON_ERRATUM_161010101 |
 | Hisilicon      | Hip0{6,7}       | #161010701      | N/A                         |
+| Hisilicon      | Hip07           | #161600802      | HISILICON_ERRATUM_161600802 |
 |                |                 |                 |                             |
 | Qualcomm Tech. | Falkor v1       | E1003           | QCOM_FALKOR_ERRATUM_1003    |
 | Qualcomm Tech. | Falkor v1       | E1009           | QCOM_FALKOR_ERRATUM_1009    |

Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt

@@ -0,0 +1,36 @@
+Amlogic meson GPIO interrupt controller
+
+Meson SoCs contains an interrupt controller which is able to watch the SoC
+pads and generate an interrupt on edge or level. The controller is essentially
+a 256 pads to 8 GIC interrupt multiplexer, with a filter block to select edge
+or level and polarity. It does not expose all 256 mux inputs because the
+documentation shows that the upper part is not mapped to any pad. The actual
+number of interrupt exposed depends on the SoC.
+
+Required properties:
+
+- compatible : must have "amlogic,meson8-gpio-intc” and either
+   “amlogic,meson8-gpio-intc” for meson8 SoCs (S802) or
+   “amlogic,meson8b-gpio-intc” for meson8b SoCs (S805) or
+   “amlogic,meson-gxbb-gpio-intc” for GXBB SoCs (S905) or
+   “amlogic,meson-gxl-gpio-intc” for GXL SoCs (S905X, S912)
+- interrupt-parent : a phandle to the GIC the interrupts are routed to.
+   Usually this is provided at the root level of the device tree as it is
+   common to most of the SoC.
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller.
+- #interrupt-cells : Specifies the number of cells needed to encode an
+   interrupt source. The value must be 2.
+- meson,channel-interrupts: Array with the 8 upstream hwirq numbers. These
+   are the hwirqs used on the parent interrupt controller.
+
+Example:
+
+gpio_interrupt: interrupt-controller@9880 {
+	compatible = "amlogic,meson-gxbb-gpio-intc",
+		     "amlogic,meson-gpio-intc";
+	reg = <0x0 0x9880 0x0 0x10>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+	meson,channel-interrupts = <64 65 66 67 68 69 70 71>;
+};

Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt

@@ -75,6 +75,10 @@ These nodes must have the following properties:
 - reg: Specifies the base physical address and size of the ITS
   registers.
 
+Optional:
+- socionext,synquacer-pre-its: (u32, u32) tuple describing the untranslated
+  address and size of the pre-ITS window.
+
 The main GIC node must contain the appropriate #address-cells,
 #size-cells and ranges properties for the reg property of all ITS
 nodes.

Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt

@@ -2,7 +2,8 @@ Broadcom Generic Level 2 Interrupt Controller
 
 Required properties:
 
-- compatible: should be "brcm,l2-intc"
+- compatible: should be "brcm,l2-intc" for latched interrupt controllers
+              should be "brcm,bcm7271-l2-intc" for level interrupt controllers
 - reg: specifies the base physical address and size of the registers
 - interrupt-controller: identifies the node as an interrupt controller
 - #interrupt-cells: specifies the number of cells needed to encode an

Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt

@@ -13,6 +13,9 @@ Required properties:
     - "renesas,irqc-r8a7793" (R-Car M2-N)
     - "renesas,irqc-r8a7794" (R-Car E2)
     - "renesas,intc-ex-r8a7795" (R-Car H3)
+    - "renesas,intc-ex-r8a7796" (R-Car M3-W)
+    - "renesas,intc-ex-r8a77970" (R-Car V3M)
+    - "renesas,intc-ex-r8a77995" (R-Car D3)
 - #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in
   interrupts.txt in this directory
 - clocks: Must contain a reference to the functional clock.

arch/arm/include/asm/arch_gicv3.h

@@ -196,6 +196,11 @@ static inline void gic_write_ctlr(u32 val)
 	isb();
 }
 
+static inline u32 gic_read_ctlr(void)
+{
+	return read_sysreg(ICC_CTLR);
+}
+
 static inline void gic_write_grpen1(u32 val)
 {
 	write_sysreg(val, ICC_IGRPEN1);

arch/arm64/Kconfig

@@ -539,6 +539,25 @@ config QCOM_QDF2400_ERRATUM_0065
 
 	  If unsure, say Y.
 
+
+config SOCIONEXT_SYNQUACER_PREITS
+	bool "Socionext Synquacer: Workaround for GICv3 pre-ITS"
+	default y
+	help
+	  Socionext Synquacer SoCs implement a separate h/w block to generate
+	  MSI doorbell writes with non-zero values for the device ID.
+
+	  If unsure, say Y.
+
+config HISILICON_ERRATUM_161600802
+	bool "Hip07 161600802: Erroneous redistributor VLPI base"
+	default y
+	help
+	  The HiSilicon Hip07 SoC usees the wrong redistributor base
+	  when issued ITS commands such as VMOVP and VMAPP, and requires
+	  a 128kB offset to be applied to the target address in this commands.
+
+	  If unsure, say Y.
 endmenu
 
 

arch/arm64/include/asm/arch_gicv3.h

@@ -87,6 +87,11 @@ static inline void gic_write_ctlr(u32 val)
 	isb();
 }
 
+static inline u32 gic_read_ctlr(void)
+{
+	return read_sysreg_s(SYS_ICC_CTLR_EL1);
+}
+
 static inline void gic_write_grpen1(u32 val)
 {
 	write_sysreg_s(val, SYS_ICC_IGRPEN1_EL1);

arch/x86/include/asm/irqdomain.h

@@ -41,8 +41,8 @@ extern int mp_irqdomain_alloc(struct irq_domain *domain, unsigned int virq,
 			      unsigned int nr_irqs, void *arg);
 extern void mp_irqdomain_free(struct irq_domain *domain, unsigned int virq,
 			      unsigned int nr_irqs);
-extern void mp_irqdomain_activate(struct irq_domain *domain,
-				  struct irq_data *irq_data);
+extern int mp_irqdomain_activate(struct irq_domain *domain,
+				 struct irq_data *irq_data, bool early);
 extern void mp_irqdomain_deactivate(struct irq_domain *domain,
 				    struct irq_data *irq_data);
 extern int mp_irqdomain_ioapic_idx(struct irq_domain *domain);

arch/x86/kernel/apic/htirq.c

@@ -112,8 +112,8 @@ static void htirq_domain_free(struct irq_domain *domain, unsigned int virq,
 	irq_domain_free_irqs_top(domain, virq, nr_irqs);
 }
 
-static void htirq_domain_activate(struct irq_domain *domain,
-				  struct irq_data *irq_data)
+static int htirq_domain_activate(struct irq_domain *domain,
+				 struct irq_data *irq_data, bool early)
 {
 	struct ht_irq_msg msg;
 	struct irq_cfg *cfg = irqd_cfg(irq_data);
@@ -132,6 +132,7 @@ static void htirq_domain_activate(struct irq_domain *domain,
 			HT_IRQ_LOW_MT_ARBITRATED) |
 		HT_IRQ_LOW_IRQ_MASKED;
 	write_ht_irq_msg(irq_data->irq, &msg);
+	return 0;
 }
 
 static void htirq_domain_deactivate(struct irq_domain *domain,

arch/x86/kernel/apic/io_apic.c

@@ -2096,7 +2096,7 @@ static inline void __init check_timer(void)
 				unmask_ioapic_irq(irq_get_irq_data(0));
 		}
 		irq_domain_deactivate_irq(irq_data);
-		irq_domain_activate_irq(irq_data);
+		irq_domain_activate_irq(irq_data, false);
 		if (timer_irq_works()) {
 			if (disable_timer_pin_1 > 0)
 				clear_IO_APIC_pin(0, pin1);
@@ -2118,7 +2118,7 @@ static inline void __init check_timer(void)
 		 */
 		replace_pin_at_irq_node(data, node, apic1, pin1, apic2, pin2);
 		irq_domain_deactivate_irq(irq_data);
-		irq_domain_activate_irq(irq_data);
+		irq_domain_activate_irq(irq_data, false);
 		legacy_pic->unmask(0);
 		if (timer_irq_works()) {
 			apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
@@ -2977,8 +2977,8 @@ void mp_irqdomain_free(struct irq_domain *domain, unsigned int virq,
 	irq_domain_free_irqs_top(domain, virq, nr_irqs);
 }
 
-void mp_irqdomain_activate(struct irq_domain *domain,
-			   struct irq_data *irq_data)
+int mp_irqdomain_activate(struct irq_domain *domain,
+			  struct irq_data *irq_data, bool early)
 {
 	unsigned long flags;
 	struct irq_pin_list *entry;
@@ -2988,6 +2988,7 @@ void mp_irqdomain_activate(struct irq_domain *domain,
 	for_each_irq_pin(entry, data->irq_2_pin)
 		__ioapic_write_entry(entry->apic, entry->pin, data->entry);
 	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
+	return 0;
 }
 
 void mp_irqdomain_deactivate(struct irq_domain *domain,

arch/x86/platform/uv/uv_irq.c

@@ -127,10 +127,11 @@ static void uv_domain_free(struct irq_domain *domain, unsigned int virq,
  * Re-target the irq to the specified CPU and enable the specified MMR located
  * on the specified blade to allow the sending of MSIs to the specified CPU.
  */
-static void uv_domain_activate(struct irq_domain *domain,
-			       struct irq_data *irq_data)
+static int uv_domain_activate(struct irq_domain *domain,
+			      struct irq_data *irq_data, bool early)
 {
 	uv_program_mmr(irqd_cfg(irq_data), irq_data->chip_data);
+	return 0;
 }
 
 /*

drivers/gpio/gpio-xgene-sb.c

@@ -140,8 +140,9 @@ static int xgene_gpio_sb_to_irq(struct gpio_chip *gc, u32 gpio)
 	return irq_create_fwspec_mapping(&fwspec);
 }
 
-static void xgene_gpio_sb_domain_activate(struct irq_domain *d,
-		struct irq_data *irq_data)
+static int xgene_gpio_sb_domain_activate(struct irq_domain *d,
+					 struct irq_data *irq_data,
+					 bool early)
 {
 	struct xgene_gpio_sb *priv = d->host_data;
 	u32 gpio = HWIRQ_TO_GPIO(priv, irq_data->hwirq);
@@ -150,11 +151,12 @@ static void xgene_gpio_sb_domain_activate(struct irq_domain *d,
 		dev_err(priv->gc.parent,
 		"Unable to configure XGene GPIO standby pin %d as IRQ\n",
 				gpio);
-		return;
+		return -ENOSPC;
 	}
 
 	xgene_gpio_set_bit(&priv->gc, priv->regs + MPA_GPIO_SEL_LO,
 			gpio * 2, 1);
+	return 0;
 }
 
 static void xgene_gpio_sb_domain_deactivate(struct irq_domain *d,

drivers/iommu/amd_iommu.c

@@ -4170,8 +4170,8 @@ static void irq_remapping_free(struct irq_domain *domain, unsigned int virq,
 	irq_domain_free_irqs_common(domain, virq, nr_irqs);
 }
 
-static void irq_remapping_activate(struct irq_domain *domain,
-				   struct irq_data *irq_data)
+static int irq_remapping_activate(struct irq_domain *domain,
+				  struct irq_data *irq_data, bool early)
 {
 	struct amd_ir_data *data = irq_data->chip_data;
 	struct irq_2_irte *irte_info = &data->irq_2_irte;
@@ -4180,6 +4180,7 @@ static void irq_remapping_activate(struct irq_domain *domain,
 	if (iommu)
 		iommu->irte_ops->activate(data->entry, irte_info->devid,
 					  irte_info->index);
+	return 0;
 }
 
 static void irq_remapping_deactivate(struct irq_domain *domain,

drivers/iommu/intel_irq_remapping.c

@@ -1389,12 +1389,13 @@ static void intel_irq_remapping_free(struct irq_domain *domain,
 	irq_domain_free_irqs_common(domain, virq, nr_irqs);
 }
 
-static void intel_irq_remapping_activate(struct irq_domain *domain,
-					 struct irq_data *irq_data)
+static int intel_irq_remapping_activate(struct irq_domain *domain,
+					struct irq_data *irq_data, bool early)
 {
 	struct intel_ir_data *data = irq_data->chip_data;
 
 	modify_irte(&data->irq_2_iommu, &data->irte_entry);
+	return 0;
 }
 
 static void intel_irq_remapping_deactivate(struct irq_domain *domain,

drivers/irqchip/Kconfig

@@ -1,3 +1,5 @@
+menu "IRQ chip support"
+
 config IRQCHIP
 	def_bool y
 	depends on OF_IRQ
@@ -321,3 +323,13 @@ config IRQ_UNIPHIER_AIDET
 	select IRQ_DOMAIN_HIERARCHY
 	help
 	  Support for the UniPhier AIDET (ARM Interrupt Detector).
+
+config MESON_IRQ_GPIO
+       bool "Meson GPIO Interrupt Multiplexer"
+       depends on ARCH_MESON
+       select IRQ_DOMAIN
+       select IRQ_DOMAIN_HIERARCHY
+       help
+         Support Meson SoC Family GPIO Interrupt Multiplexer
+
+endmenu

drivers/irqchip/Makefile

@@ -79,3 +79,4 @@ obj-$(CONFIG_ARCH_ASPEED)		+= irq-aspeed-vic.o irq-aspeed-i2c-ic.o
 obj-$(CONFIG_STM32_EXTI) 		+= irq-stm32-exti.o
 obj-$(CONFIG_QCOM_IRQ_COMBINER)		+= qcom-irq-combiner.o
 obj-$(CONFIG_IRQ_UNIPHIER_AIDET)	+= irq-uniphier-aidet.o
+obj-$(CONFIG_MESON_IRQ_GPIO)		+= irq-meson-gpio.o

drivers/irqchip/irq-aspeed-i2c-ic.c

@@ -76,8 +76,8 @@ static int __init aspeed_i2c_ic_of_init(struct device_node *node,
 		return -ENOMEM;
 
 	i2c_ic->base = of_iomap(node, 0);
-	if (IS_ERR(i2c_ic->base)) {
-		ret = PTR_ERR(i2c_ic->base);
+	if (!i2c_ic->base) {
+		ret = -ENOMEM;
 		goto err_free_ic;
 	}