spi: imx: Fix failure path leak on GPIO request error correctly

In commit 974488e ("spi: imx: Fix failure path leak on GPIO request
error"), spi_bitbang_start() was moved later in the probe sequence.  But
this doesn't work, as spi_bitbang_start() has to be called before
requesting GPIOs because the GPIO data in the spi master is populated when
the master is registed, and that doesn't happen until spi_bitbang_start()
is called.  The default only works if one uses one CS.

So add a failure path call to spi_bitbang_stop() to fix the leak.

CC: Shawn Guo <shawnguo@kernel.org>
CC: Sascha Hauer <kernel@pengutronix.de>
CC: Fabio Estevam <fabio.estevam@nxp.com>
CC: Mark Brown <broonie@kernel.org>
CC: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

drivers/spi/spi-imx.c

@@ -1613,6 +1613,11 @@ static int spi_imx_probe(struct platform_device *pdev)
 	spi_imx->devtype_data->intctrl(spi_imx, 0);
 
 	master->dev.of_node = pdev->dev.of_node;
+	ret = spi_bitbang_start(&spi_imx->bitbang);
+	if (ret) {
+		dev_err(&pdev->dev, "bitbang start failed with %d\n", ret);
+		goto out_clk_put;
+	}
 
 	if (!spi_imx->slave_mode) {
 		if (!master->cs_gpios) {
@@ -1631,23 +1636,19 @@ static int spi_imx_probe(struct platform_device *pdev)
 			if (ret) {
 				dev_err(&pdev->dev, "Can't get CS GPIO %i\n",
 					master->cs_gpios[i]);
-				goto out_clk_put;
+				goto out_spi_bitbang;
 			}
 		}
 	}
 
-	ret = spi_bitbang_start(&spi_imx->bitbang);
-	if (ret) {
-		dev_err(&pdev->dev, "bitbang start failed with %d\n", ret);
-		goto out_clk_put;
-	}
-
 	dev_info(&pdev->dev, "probed\n");
 
 	clk_disable(spi_imx->clk_ipg);
 	clk_disable(spi_imx->clk_per);
 	return ret;
 
+out_spi_bitbang:
+	spi_bitbang_stop(&spi_imx->bitbang);
 out_clk_put:
 	clk_disable_unprepare(spi_imx->clk_ipg);
 out_put_per: