net: enetc: fix incorrect TPID when receiving 802.1ad tagged packets

When the enetc ports have rx-vlan-offload enabled, they report a TPID of
ETH_P_8021Q regardless of what was actually in the packet. When
rx-vlan-offload is disabled, packets have the proper TPID. Fix this
inconsistency by finishing the TODO left in the code.

Fixes: d4fd040 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/freescale/enetc/enetc.c

@@ -523,9 +523,8 @@ static void enetc_get_rx_tstamp(struct net_device *ndev,
 static void enetc_get_offloads(struct enetc_bdr *rx_ring,
 			       union enetc_rx_bd *rxbd, struct sk_buff *skb)
 {
-#ifdef CONFIG_FSL_ENETC_PTP_CLOCK
 	struct enetc_ndev_priv *priv = netdev_priv(rx_ring->ndev);
-#endif
+
 	/* TODO: hashing */
 	if (rx_ring->ndev->features & NETIF_F_RXCSUM) {
 		u16 inet_csum = le16_to_cpu(rxbd->r.inet_csum);
@@ -534,12 +533,31 @@ static void enetc_get_offloads(struct enetc_bdr *rx_ring,
 		skb->ip_summed = CHECKSUM_COMPLETE;
 	}
 
-	/* copy VLAN to skb, if one is extracted, for now we assume it's a
-	 * standard TPID, but HW also supports custom values
-	 */
-	if (le16_to_cpu(rxbd->r.flags) & ENETC_RXBD_FLAG_VLAN)
-		__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
-				       le16_to_cpu(rxbd->r.vlan_opt));
+	if (le16_to_cpu(rxbd->r.flags) & ENETC_RXBD_FLAG_VLAN) {
+		__be16 tpid = 0;
+
+		switch (le16_to_cpu(rxbd->r.flags) & ENETC_RXBD_FLAG_TPID) {
+		case 0:
+			tpid = htons(ETH_P_8021Q);
+			break;
+		case 1:
+			tpid = htons(ETH_P_8021AD);
+			break;
+		case 2:
+			tpid = htons(enetc_port_rd(&priv->si->hw,
+						   ENETC_PCVLANR1));
+			break;
+		case 3:
+			tpid = htons(enetc_port_rd(&priv->si->hw,
+						   ENETC_PCVLANR2));
+			break;
+		default:
+			break;
+		}
+
+		__vlan_hwaccel_put_tag(skb, tpid, le16_to_cpu(rxbd->r.vlan_opt));
+	}
+
 #ifdef CONFIG_FSL_ENETC_PTP_CLOCK
 	if (priv->active_offloads & ENETC_F_RX_TSTAMP)
 		enetc_get_rx_tstamp(rx_ring->ndev, rxbd, skb);

drivers/net/ethernet/freescale/enetc/enetc_hw.h

@@ -172,6 +172,8 @@ enum enetc_bdr_type {TX, RX};
 #define ENETC_PSIPMAR0(n)	(0x0100 + (n) * 0x8) /* n = SI index */
 #define ENETC_PSIPMAR1(n)	(0x0104 + (n) * 0x8)
 #define ENETC_PVCLCTR		0x0208
+#define ENETC_PCVLANR1		0x0210
+#define ENETC_PCVLANR2		0x0214
 #define ENETC_VLAN_TYPE_C	BIT(0)
 #define ENETC_VLAN_TYPE_S	BIT(1)
 #define ENETC_PVCLCTR_OVTPIDL(bmp)	((bmp) & 0xff) /* VLAN_TYPE */
@@ -570,6 +572,7 @@ union enetc_rx_bd {
 #define ENETC_RXBD_LSTATUS(flags)	((flags) << 16)
 #define ENETC_RXBD_FLAG_VLAN	BIT(9)
 #define ENETC_RXBD_FLAG_TSTMP	BIT(10)
+#define ENETC_RXBD_FLAG_TPID	GENMASK(1, 0)
 
 #define ENETC_MAC_ADDR_FILT_CNT	8 /* # of supported entries per port */
 #define EMETC_MAC_ADDR_FILT_RES	3 /* # of reserved entries at the beginning */