Merge tag 'mips_5.11' of git://git.kernel.org/pub/scm/linux/kernel/gi…

…t/mips/linux

Pull MIPS updates from Thomas Bogendoerfer:

 - enable GCOV

 - rework setup of protection map

 - add support for more MSCC platforms

 - add sysfs boardinfo for Loongson64

 - enable KASLR for Loogson64

 - add reset controller for BCM63xx

 - cleanups and fixes

* tag 'mips_5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (70 commits)
  mips: fix Section mismatch in reference
  MAINTAINERS: Add linux-mips mailing list to JZ47xx entries
  MAINTAINERS: Remove JZ4780 DMA driver entry
  MAINTAINERS: chenhc@lemote.com -> chenhuacai@kernel.org
  MIPS: Octeon: irq: Alloc desc before configuring IRQ
  MIPS: mm: Add back define for PAGE_SHARED
  MIPS: Select ARCH_KEEP_MEMBLOCK if DEBUG_KERNEL to enable sysfs memblock debug
  mips: lib: uncached: fix non-standard usage of variable 'sp'
  MIPS: DTS: img: Fix schema warnings for pwm-leds
  MIPS: KASLR: Avoid endless loop in sync_icache if synci_step is zero
  MIPS: Move memblock_dump_all() to the end of setup_arch()
  MIPS: SMP-CPS: Add support for irq migration when CPU offline
  MIPS: OCTEON: Don't add kernel sections into memblock allocator
  MIPS: Don't round up kernel sections size for memblock_add()
  MIPS: Enable GCOV
  MIPS: configs: drop unused BACKLIGHT_GENERIC option
  MIPS: Loongson64: Fix up reserving kernel memory range
  MIPS: mm: Remove unused is_aligned_hugepage_range
  MIPS: No need to check CPU 0 in {loongson3,bmips,octeon}_cpu_disable()
  mips: cdmm: fix use-after-free in mips_cdmm_bus_discover
  ...

.mailmap

@@ -122,6 +122,8 @@ Henk Vergonet <Henk.Vergonet@gmail.com>
 Henrik Kretzschmar <henne@nachtwindheim.de>
 Henrik Rydberg <rydberg@bitmath.org>
 Herbert Xu <herbert@gondor.apana.org.au>
+Huacai Chen <chenhuacai@kernel.org> <chenhc@lemote.com>
+Huacai Chen <chenhuacai@kernel.org> <chenhuacai@loongson.cn>
 Jacob Shin <Jacob.Shin@amd.com>
 Jaegeuk Kim <jaegeuk@kernel.org> <jaegeuk@google.com>
 Jaegeuk Kim <jaegeuk@kernel.org> <jaegeuk.kim@samsung.com>

Documentation/ABI/testing/sysfs-firmware-lefi-boardinfo

@@ -0,0 +1,35 @@
+What:		/sys/firmware/lefi/boardinfo
+Date:		October 2020
+Contact:	Tiezhu Yang <yangtiezhu@loongson.cn>
+Description:
+		Get mainboard and BIOS info easily on the Loongson platform,
+		this is useful to point out the current used mainboard type
+		and BIOS version when there exists problems related with
+		hardware or firmware.
+
+		The related structures are already defined in the interface
+		specification about firmware and kernel which are common
+		requirement and specific for Loongson64, so only add a new
+		boardinfo.c file in arch/mips/loongson64.
+
+		For example:
+
+		[loongson@linux ~]$ cat /sys/firmware/lefi/boardinfo
+		Board Info
+		Manufacturer            : LEMOTE
+		Board Name              : LEMOTE-LS3A4000-7A1000-1w-V01-pc
+		Family                  : LOONGSON3
+
+		BIOS Info
+		Vendor                  : Kunlun
+		Version                 : Kunlun-A1901-V4.1.3-20200414093938
+		ROM Size                : 4 KB
+		Release Date            : 2020-04-14
+
+		By the way, using dmidecode command can get the similar info if there
+		exists SMBIOS in firmware, but the fact is that there is no SMBIOS on
+		some machines, we can see nothing when execute dmidecode, like this:
+
+		[root@linux loongson]# dmidecode
+		# dmidecode 2.12
+		# No SMBIOS nor DMI entry point found, sorry.

Documentation/devicetree/bindings/mips/mscc.txt

@@ -4,7 +4,7 @@ Boards with a SoC of the Microsemi MIPS family shall have the following
 properties:
 
 Required properties:
-- compatible: "mscc,ocelot"
+- compatible: "mscc,ocelot", "mscc,luton", "mscc,serval" or "mscc,jr2"
 
 
 * Other peripherals:

Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.yaml

@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/brcm,bcm6345-reset.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: BCM6345 reset controller
+
+description: This document describes the BCM6345 reset controller.
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+
+properties:
+  compatible:
+    const: brcm,bcm6345-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@10000010 {
+      compatible = "brcm,bcm6345-reset";
+      reg = <0x10000010 0x4>;
+      #reset-cells = <1>;
+    };

MAINTAINERS

@@ -8736,19 +8736,16 @@ F:	include/uapi/rdma/
 F:	samples/bpf/ibumad_kern.c
 F:	samples/bpf/ibumad_user.c
 
-INGENIC JZ4780 DMA Driver
-M:	Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
-S:	Maintained
-F:	drivers/dma/dma-jz4780.c
-
 INGENIC JZ4780 NAND DRIVER
 M:	Harvey Hunt <harveyhuntnexus@gmail.com>
 L:	linux-mtd@lists.infradead.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	drivers/mtd/nand/raw/ingenic/
 
 INGENIC JZ47xx SoCs
 M:	Paul Cercueil <paul@crapouillou.net>
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/boot/dts/ingenic/
 F:	arch/mips/generic/board-ingenic.c
@@ -9710,7 +9707,7 @@ F:	arch/arm64/kvm/
 F:	include/kvm/arm_*
 
 KERNEL VIRTUAL MACHINE FOR MIPS (KVM/mips)
-M:	Huacai Chen <chenhc@lemote.com>
+M:	Huacai Chen <chenhuacai@kernel.org>
 M:	Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
 L:	linux-mips@vger.kernel.org
 L:	kvm@vger.kernel.org
@@ -11852,7 +11849,7 @@ F:	drivers/*/*/*loongson2*
 F:	drivers/*/*loongson2*
 
 MIPS/LOONGSON64 ARCHITECTURE
-M:	Huacai Chen <chenhc@lemote.com>
+M:	Huacai Chen <chenhuacai@kernel.org>
 M:	Jiaxun Yang <jiaxun.yang@flygoat.com>
 L:	linux-mips@vger.kernel.org
 S:	Maintained

arch/mips/Kconfig

@@ -9,6 +9,8 @@ config MIPS
 	select ARCH_HAS_PTE_SPECIAL if !(32BIT && CPU_HAS_RIXI)
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_HAS_UBSAN_SANITIZE_ALL
+	select ARCH_HAS_GCOV_PROFILE_ALL
+	select ARCH_KEEP_MEMBLOCK if DEBUG_KERNEL
 	select ARCH_SUPPORTS_UPROBES
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF if 64BIT
@@ -248,6 +250,7 @@ config ATH79
 
 config BMIPS_GENERIC
 	bool "Broadcom Generic BMIPS kernel"
+	select ARCH_HAS_RESET_CONTROLLER
 	select ARCH_HAS_SYNC_DMA_FOR_CPU_ALL
 	select ARCH_HAS_PHYS_TO_DMA
 	select BOOT_RAW
@@ -486,6 +489,7 @@ config MACH_LOONGSON64
 	select SYS_SUPPORTS_HIGHMEM
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_ZBOOT
+	select SYS_SUPPORTS_RELOCATABLE
 	select ZONE_DMA32
 	select NUMA
 	select SMP
@@ -2484,6 +2488,7 @@ config MIPS_CPS
 	select SYS_SUPPORTS_SCHED_SMT if CPU_MIPSR6
 	select SYS_SUPPORTS_SMP
 	select WEAK_ORDERING
+	select GENERIC_IRQ_MIGRATION if HOTPLUG_CPU
 	help
 	  Select this if you wish to run an SMP kernel across multiple cores
 	  within a MIPS Coherent Processing System. When this option is
@@ -2644,7 +2649,7 @@ config WAR_R4600_V1_INDEX_ICACHEOP
 #  18. The CACHE instructions Hit_Writeback_Invalidate_D, Hit_Writeback_D,
 #      Hit_Invalidate_D and Create_Dirty_Excl_D should only be
 #      executed if there is no other dcache activity. If the dcache is
-#      accessed for another instruction immeidately preceding when these
+#      accessed for another instruction immediately preceding when these
 #      cache instructions are executing, it is possible that the dcache
 #      tag match outputs used by these cache instructions will be
 #      incorrect. These cache instructions should be preceded by at least
@@ -2777,7 +2782,8 @@ config RELOCATABLE
 	depends on CPU_MIPS32_R2 || CPU_MIPS64_R2 || \
 		   CPU_MIPS32_R5 || CPU_MIPS64_R5 || \
 		   CPU_MIPS32_R6 || CPU_MIPS64_R6 || \
-		   CPU_P5600 || CAVIUM_OCTEON_SOC
+		   CPU_P5600 || CAVIUM_OCTEON_SOC || \
+		   CPU_LOONGSON64
 	help
 	  This builds a kernel image that retains relocation information
 	  so it can be loaded someplace besides the default 1MB.
@@ -2788,6 +2794,7 @@ config RELOCATION_TABLE_SIZE
 	hex "Relocation table size"
 	depends on RELOCATABLE
 	range 0x0 0x01000000
+	default "0x00200000" if CPU_LOONGSON64
 	default "0x00100000"
 	help
 	  A table of relocation data will be appended to the kernel binary
@@ -3086,7 +3093,7 @@ config MIPS_O32_FP64_SUPPORT
 
 	  Although binutils currently supports use of this flag the details
 	  concerning its effect upon the O32 ABI in userland are still being
-	  worked on. In order to avoid userland becoming dependant upon current
+	  worked on. In order to avoid userland becoming dependent upon current
 	  behaviour before the details have been finalised, this option should
 	  be considered experimental and only enabled by those working upon
 	  said details.
@@ -3124,7 +3131,7 @@ choice
 
 		    objcopy --update-section .appended_dtb=<filename>.dtb vmlinux
 
-		  This is meant as a backward compatiblity convenience for those
+		  This is meant as a backward compatibility convenience for those
 		  systems with a bootloader that can't be upgraded to accommodate
 		  the documented boot protocol using a device tree.
 

arch/mips/Makefile

@@ -347,6 +347,7 @@ bootz-y			+= vmlinuz.srec
 ifeq ($(shell expr $(zload-y) \< 0xffffffff80000000 2> /dev/null), 0)
 bootz-y			+= uzImage.bin
 endif
+bootz-y			+= vmlinuz.itb
 
 #
 # Some machines like the Indy need 32-bit ELF binaries for booting purposes.
@@ -378,7 +379,7 @@ ifdef CONFIG_SYS_SUPPORTS_ZBOOT
 # boot/compressed
 $(bootz-y): $(vmlinux-32) FORCE
 	$(Q)$(MAKE) $(build)=arch/mips/boot/compressed \
-		$(bootvars-y) 32bit-bfd=$(32bit-bfd) $@
+		$(bootvars-y) 32bit-bfd=$(32bit-bfd) arch/mips/boot/$@
 else
 vmlinuz: FORCE
 	@echo '   CONFIG_SYS_SUPPORTS_ZBOOT is not enabled'

arch/mips/ar7/gpio.c

@@ -319,6 +319,7 @@ int __init ar7_gpio_init(void)
 	if (ret) {
 		printk(KERN_ERR "%s: failed to add gpiochip\n",
 					gpch->chip.label);
+		iounmap(gpch->regs);
 		return ret;
 	}
 	printk(KERN_INFO "%s: registered %d GPIOs\n",

arch/mips/bcm47xx/Kconfig

@@ -9,6 +9,7 @@ config BCM47XX_SSB
 	select SSB_DRIVER_MIPS
 	select SSB_DRIVER_EXTIF
 	select SSB_EMBEDDED
+	select SSB_PCIHOST if PCI
 	select SSB_B43_PCI_BRIDGE if PCI
 	select SSB_DRIVER_PCICORE if PCI
 	select SSB_PCICORE_HOSTMODE if PCI
@@ -27,6 +28,7 @@ config BCM47XX_BCMA
 	select BCMA
 	select BCMA_HOST_SOC
 	select BCMA_DRIVER_MIPS
+	select BCMA_DRIVER_PCI if PCI
 	select BCMA_DRIVER_PCI_HOSTMODE if PCI
 	select BCMA_DRIVER_GPIO
 	default y

arch/mips/boot/.gitignore

@@ -2,6 +2,7 @@
 mkboot
 elf2ecoff
 vmlinux.*
+vmlinuz.*
 zImage
 zImage.tmp
 calc_vmlinuz_load_addr