powerpc/rtas: Move rtas entry assembly into its own file

This makes working on the code a bit easier.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220308135047.478297-2-npiggin@gmail.com

arch/powerpc/kernel/Makefile

@@ -68,7 +68,7 @@ obj-$(CONFIG_PPC_BOOK3S_IDLE)	+= idle_book3s.o
 procfs-y			:= proc_powerpc.o
 obj-$(CONFIG_PROC_FS)		+= $(procfs-y)
 rtaspci-$(CONFIG_PPC64)-$(CONFIG_PCI)	:= rtas_pci.o
-obj-$(CONFIG_PPC_RTAS)		+= rtas.o rtas-rtc.o $(rtaspci-y-y)
+obj-$(CONFIG_PPC_RTAS)		+= rtas_entry.o rtas.o rtas-rtc.o $(rtaspci-y-y)
 obj-$(CONFIG_PPC_RTAS_DAEMON)	+= rtasd.o
 obj-$(CONFIG_RTAS_FLASH)	+= rtas_flash.o
 obj-$(CONFIG_RTAS_PROC)		+= rtas-proc.o

arch/powerpc/kernel/entry_32.S

@@ -555,52 +555,3 @@ ret_from_mcheck_exc:
 _ASM_NOKPROBE_SYMBOL(ret_from_mcheck_exc)
 #endif /* CONFIG_BOOKE */
 #endif /* !(CONFIG_4xx || CONFIG_BOOKE) */
-
-/*
- * PROM code for specific machines follows.  Put it
- * here so it's easy to add arch-specific sections later.
- * -- Cort
- */
-#ifdef CONFIG_PPC_RTAS
-/*
- * On CHRP, the Run-Time Abstraction Services (RTAS) have to be
- * called with the MMU off.
- */
-_GLOBAL(enter_rtas)
-	stwu	r1,-INT_FRAME_SIZE(r1)
-	mflr	r0
-	stw	r0,INT_FRAME_SIZE+4(r1)
-	LOAD_REG_ADDR(r4, rtas)
-	lis	r6,1f@ha	/* physical return address for rtas */
-	addi	r6,r6,1f@l
-	tophys(r6,r6)
-	lwz	r8,RTASENTRY(r4)
-	lwz	r4,RTASBASE(r4)
-	mfmsr	r9
-	stw	r9,8(r1)
-	LOAD_REG_IMMEDIATE(r0,MSR_KERNEL)
-	mtmsr	r0	/* disable interrupts so SRR0/1 don't get trashed */
-	li	r9,MSR_KERNEL & ~(MSR_IR|MSR_DR)
-	mtlr	r6
-	stw	r1, THREAD + RTAS_SP(r2)
-	mtspr	SPRN_SRR0,r8
-	mtspr	SPRN_SRR1,r9
-	rfi
-1:
-	lis	r8, 1f@h
-	ori	r8, r8, 1f@l
-	LOAD_REG_IMMEDIATE(r9,MSR_KERNEL)
-	mtspr	SPRN_SRR0,r8
-	mtspr	SPRN_SRR1,r9
-	rfi			/* Reactivate MMU translation */
-1:
-	lwz	r8,INT_FRAME_SIZE+4(r1)	/* get return address */
-	lwz	r9,8(r1)	/* original msr value */
-	addi	r1,r1,INT_FRAME_SIZE
-	li	r0,0
-	stw	r0, THREAD + RTAS_SP(r2)
-	mtlr	r8
-	mtmsr	r9
-	blr			/* return to caller */
-_ASM_NOKPROBE_SYMBOL(enter_rtas)
-#endif /* CONFIG_PPC_RTAS */

arch/powerpc/kernel/entry_64.S

@@ -264,156 +264,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
 	addi	r1,r1,SWITCH_FRAME_SIZE
 	blr
 
-#ifdef CONFIG_PPC_RTAS
-/*
- * On CHRP, the Run-Time Abstraction Services (RTAS) have to be
- * called with the MMU off.
- *
- * In addition, we need to be in 32b mode, at least for now.
- * 
- * Note: r3 is an input parameter to rtas, so don't trash it...
- */
-_GLOBAL(enter_rtas)
-	mflr	r0
-	std	r0,16(r1)
-        stdu	r1,-SWITCH_FRAME_SIZE(r1) /* Save SP and create stack space. */
-
-	/* Because RTAS is running in 32b mode, it clobbers the high order half
-	 * of all registers that it saves.  We therefore save those registers
-	 * RTAS might touch to the stack.  (r0, r3-r13 are caller saved)
-   	 */
-	SAVE_GPR(2, r1)			/* Save the TOC */
-	SAVE_GPR(13, r1)		/* Save paca */
-	SAVE_NVGPRS(r1)			/* Save the non-volatiles */
-
-	mfcr	r4
-	std	r4,_CCR(r1)
-	mfctr	r5
-	std	r5,_CTR(r1)
-	mfspr	r6,SPRN_XER
-	std	r6,_XER(r1)
-	mfdar	r7
-	std	r7,_DAR(r1)
-	mfdsisr	r8
-	std	r8,_DSISR(r1)
-
-	/* Temporary workaround to clear CR until RTAS can be modified to
-	 * ignore all bits.
-	 */
-	li	r0,0
-	mtcr	r0
-
-#ifdef CONFIG_BUG
-	/* There is no way it is acceptable to get here with interrupts enabled,
-	 * check it with the asm equivalent of WARN_ON
-	 */
-	lbz	r0,PACAIRQSOFTMASK(r13)
-1:	tdeqi	r0,IRQS_ENABLED
-	EMIT_WARN_ENTRY 1b,__FILE__,__LINE__,BUGFLAG_WARNING
-#endif
-
-	/* Hard-disable interrupts */
-	mfmsr	r6
-	rldicl	r7,r6,48,1
-	rotldi	r7,r7,16
-	mtmsrd	r7,1
-
-	/* Unfortunately, the stack pointer and the MSR are also clobbered,
-	 * so they are saved in the PACA which allows us to restore
-	 * our original state after RTAS returns.
-         */
-	std	r1,PACAR1(r13)
-        std	r6,PACASAVEDMSR(r13)
-
-	/* Setup our real return addr */	
-	LOAD_REG_ADDR(r4,rtas_return_loc)
-	clrldi	r4,r4,2			/* convert to realmode address */
-       	mtlr	r4
-
-__enter_rtas:
-	LOAD_REG_ADDR(r4, rtas)
-	ld	r5,RTASENTRY(r4)	/* get the rtas->entry value */
-	ld	r4,RTASBASE(r4)		/* get the rtas->base value */
-
-	/*
-	 * RTAS runs in 32-bit big endian real mode, but leave MSR[RI] on as we
-	 * may hit NMI (SRESET or MCE) while in RTAS. RTAS should disable RI in
-	 * its critical regions (as specified in PAPR+ section 7.2.1). MSR[S]
-	 * is not impacted by RFI_TO_KERNEL (only urfid can unset it). So if
-	 * MSR[S] is set, it will remain when entering RTAS.
-	 */
-	LOAD_REG_IMMEDIATE(r6, MSR_ME | MSR_RI)
-
-	li      r0,0
-	mtmsrd  r0,1                    /* disable RI before using SRR0/1 */
-
-	mtspr	SPRN_SRR0,r5
-	mtspr	SPRN_SRR1,r6
-	RFI_TO_KERNEL
-	b	.	/* prevent speculative execution */
-
-rtas_return_loc:
-	FIXUP_ENDIAN
-
-	/*
-	 * Clear RI and set SF before anything.
-	 */
-	mfmsr   r6
-	li	r0,MSR_RI
-	andc	r6,r6,r0
-	sldi	r0,r0,(MSR_SF_LG - MSR_RI_LG)
-	or	r6,r6,r0
-	sync
-	mtmsrd  r6
-
-	/* relocation is off at this point */
-	GET_PACA(r4)
-	clrldi	r4,r4,2			/* convert to realmode address */
-
-	bcl	20,31,$+4
-0:	mflr	r3
-	ld	r3,(1f-0b)(r3)		/* get &rtas_restore_regs */
-
-        ld	r1,PACAR1(r4)           /* Restore our SP */
-        ld	r4,PACASAVEDMSR(r4)     /* Restore our MSR */
-
-	mtspr	SPRN_SRR0,r3
-	mtspr	SPRN_SRR1,r4
-	RFI_TO_KERNEL
-	b	.	/* prevent speculative execution */
-_ASM_NOKPROBE_SYMBOL(__enter_rtas)
-_ASM_NOKPROBE_SYMBOL(rtas_return_loc)
-
-	.align	3
-1:	.8byte	rtas_restore_regs
-
-rtas_restore_regs:
-	/* relocation is on at this point */
-	REST_GPR(2, r1)			/* Restore the TOC */
-	REST_GPR(13, r1)		/* Restore paca */
-	REST_NVGPRS(r1)			/* Restore the non-volatiles */
-
-	GET_PACA(r13)
-
-	ld	r4,_CCR(r1)
-	mtcr	r4
-	ld	r5,_CTR(r1)
-	mtctr	r5
-	ld	r6,_XER(r1)
-	mtspr	SPRN_XER,r6
-	ld	r7,_DAR(r1)
-	mtdar	r7
-	ld	r8,_DSISR(r1)
-	mtdsisr	r8
-
-        addi	r1,r1,SWITCH_FRAME_SIZE	/* Unstack our frame */
-	ld	r0,16(r1)		/* get return address */
-
-	mtlr    r0
-        blr				/* return to caller */
-
-#endif /* CONFIG_PPC_RTAS */
-
 _GLOBAL(enter_prom)
 	mflr	r0
 	std	r0,16(r1)