Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6

Documentation/Changes

@@ -65,7 +65,7 @@ o  isdn4k-utils           3.1pre1                 # isdnctrl 2>&1|grep version
 o  nfs-utils              1.0.5                   # showmount --version
 o  procps                 3.2.0                   # ps --version
 o  oprofile               0.9                     # oprofiled --version
-o  udev                   058                     # udevinfo -V
+o  udev                   071                     # udevinfo -V
 
 Kernel compilation
 ==================

Documentation/DocBook/writing_usb_driver.tmpl

@@ -345,8 +345,7 @@ if (!retval) {
   <programlisting>
 static inline void skel_delete (struct usb_skel *dev)
 {
-    if (dev->bulk_in_buffer != NULL)
-        kfree (dev->bulk_in_buffer);
+    kfree (dev->bulk_in_buffer);
     if (dev->bulk_out_buffer != NULL)
         usb_buffer_free (dev->udev, dev->bulk_out_size,
             dev->bulk_out_buffer,

Documentation/driver-model/driver.txt

@@ -14,8 +14,8 @@ struct device_driver {
         int     (*probe)        (struct device * dev);
         int     (*remove)       (struct device * dev);
 
-        int     (*suspend)      (struct device * dev, pm_message_t state, u32 level);
-        int     (*resume)       (struct device * dev, u32 level);
+        int     (*suspend)      (struct device * dev, pm_message_t state);
+        int     (*resume)       (struct device * dev);
 };
 
 
@@ -194,69 +194,13 @@ device; i.e. anything in the device's driver_data field.
 If the device is still present, it should quiesce the device and place
 it into a supported low-power state.
 
-	int	(*suspend)	(struct device * dev, pm_message_t state, u32 level);
+	int	(*suspend)	(struct device * dev, pm_message_t state);
 
-suspend is called to put the device in a low power state. There are
-several stages to successfully suspending a device, which is denoted in
-the @level parameter. Breaking the suspend transition into several
-stages affords the platform flexibility in performing device power
-management based on the requirements of the system and the
-user-defined policy.
+suspend is called to put the device in a low power state.
 
-SUSPEND_NOTIFY notifies the device that a suspend transition is about
-to happen. This happens on system power state transitions to verify
-that all devices can successfully suspend.
+	int	(*resume)	(struct device * dev);
 
-A driver may choose to fail on this call, which should cause the
-entire suspend transition to fail. A driver should fail only if it
-knows that the device will not be able to be resumed properly when the
-system wakes up again. It could also fail if it somehow determines it
-is in the middle of an operation too important to stop.
-
-SUSPEND_DISABLE tells the device to stop I/O transactions. When it
-stops transactions, or what it should do with unfinished transactions
-is a policy of the driver. After this call, the driver should not
-accept any other I/O requests.
-
-SUSPEND_SAVE_STATE tells the device to save the context of the
-hardware. This includes any bus-specific hardware state and
-device-specific hardware state. A pointer to this saved state can be
-stored in the device's saved_state field.
-
-SUSPEND_POWER_DOWN tells the driver to place the device in the low
-power state requested. 
-
-Whether suspend is called with a given level is a policy of the
-platform. Some levels may be omitted; drivers must not assume the
-reception of any level. However, all levels must be called in the
-order above; i.e. notification will always come before disabling;
-disabling the device will come before suspending the device.
-
-All calls are made with interrupts enabled, except for the
-SUSPEND_POWER_DOWN level.
-
-	int	(*resume)	(struct device * dev, u32 level);
-
-Resume is used to bring a device back from a low power state. Like the
-suspend transition, it happens in several stages. 
-
-RESUME_POWER_ON tells the driver to set the power state to the state
-before the suspend call (The device could have already been in a low
-power state before the suspend call to put in a lower power state). 
-
-RESUME_RESTORE_STATE tells the driver to restore the state saved by
-the SUSPEND_SAVE_STATE suspend call. 
-
-RESUME_ENABLE tells the driver to start accepting I/O transactions
-again. Depending on driver policy, the device may already have pending
-I/O requests. 
-
-RESUME_POWER_ON is called with interrupts disabled. The other resume
-levels are called with interrupts enabled. 
-
-As with the various suspend stages, the driver must not assume that
-any other resume calls have been or will be made. Each call should be
-self-contained and not dependent on any external state.
+Resume is used to bring a device back from a low power state.
 
 
 Attributes

Documentation/driver-model/porting.txt

@@ -350,7 +350,7 @@ When a driver is registered, the bus's list of devices is iterated
 over. bus->match() is called for each device that is not already
 claimed by a driver. 
 
-When a device is successfully bound to a device, device->driver is
+When a device is successfully bound to a driver, device->driver is
 set, the device is added to a per-driver list of devices, and a
 symlink is created in the driver's sysfs directory that points to the
 device's physical directory:

arch/arm/common/locomo.c

@@ -550,15 +550,12 @@ struct locomo_save_data {
 	u16	LCM_SPIMD;
 };
 
-static int locomo_suspend(struct device *dev, pm_message_t state, u32 level)
+static int locomo_suspend(struct device *dev, pm_message_t state)
 {
 	struct locomo *lchip = dev_get_drvdata(dev);
 	struct locomo_save_data *save;
 	unsigned long flags;
 
-	if (level != SUSPEND_DISABLE)
-		return 0;
-
 	save = kmalloc(sizeof(struct locomo_save_data), GFP_KERNEL);
 	if (!save)
 		return -ENOMEM;
@@ -597,16 +594,13 @@ static int locomo_suspend(struct device *dev, pm_message_t state, u32 level)
 	return 0;
 }
 
-static int locomo_resume(struct device *dev, u32 level)
+static int locomo_resume(struct device *dev)
 {
 	struct locomo *lchip = dev_get_drvdata(dev);
 	struct locomo_save_data *save;
 	unsigned long r;
 	unsigned long flags;
 
-	if (level != RESUME_ENABLE)
-		return 0;
-
 	save = (struct locomo_save_data *) dev->power.saved_state;
 	if (!save)
 		return 0;

arch/arm/common/sa1111.c

@@ -801,17 +801,14 @@ struct sa1111_save_data {
 
 #ifdef CONFIG_PM
 
-static int sa1111_suspend(struct device *dev, pm_message_t state, u32 level)
+static int sa1111_suspend(struct device *dev, pm_message_t state)
 {
 	struct sa1111 *sachip = dev_get_drvdata(dev);
 	struct sa1111_save_data *save;
 	unsigned long flags;
 	unsigned int val;
 	void __iomem *base;
 
-	if (level != SUSPEND_DISABLE)
-		return 0;
-
 	save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL);
 	if (!save)
 		return -ENOMEM;
@@ -856,23 +853,19 @@ static int sa1111_suspend(struct device *dev, pm_message_t state, u32 level)
 /*
  *	sa1111_resume - Restore the SA1111 device state.
  *	@dev: device to restore
- *	@level: resume level
  *
  *	Restore the general state of the SA1111; clock control and
  *	interrupt controller.  Other parts of the SA1111 must be
  *	restored by their respective drivers, and must be called
  *	via LDM after this function.
  */
-static int sa1111_resume(struct device *dev, u32 level)
+static int sa1111_resume(struct device *dev)
 {
 	struct sa1111 *sachip = dev_get_drvdata(dev);
 	struct sa1111_save_data *save;
 	unsigned long flags, id;
 	void __iomem *base;
 
-	if (level != RESUME_ENABLE)
-		return 0;
-
 	save = (struct sa1111_save_data *)dev->power.saved_state;
 	if (!save)
 		return 0;

arch/arm/common/scoop.c

@@ -102,26 +102,24 @@ static void check_scoop_reg(struct scoop_dev *sdev)
 }
 
 #ifdef CONFIG_PM
-static int scoop_suspend(struct device *dev, pm_message_t state, uint32_t level)
+static int scoop_suspend(struct device *dev, pm_message_t state)
 {
-	if (level == SUSPEND_POWER_DOWN) {
-		struct scoop_dev *sdev = dev_get_drvdata(dev);
+	struct scoop_dev *sdev = dev_get_drvdata(dev);
+
+	check_scoop_reg(sdev);
+	sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR);
+	SCOOP_REG(sdev->base, SCOOP_GPWR) = (sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set;
 
-		check_scoop_reg(sdev);
-  		sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR);
-		SCOOP_REG(sdev->base, SCOOP_GPWR) = (sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set;
-	}
 	return 0;
 }
 
-static int scoop_resume(struct device *dev, uint32_t level)
+static int scoop_resume(struct device *dev)
 {
-	if (level == RESUME_POWER_ON) {
-		struct scoop_dev *sdev = dev_get_drvdata(dev);
+	struct scoop_dev *sdev = dev_get_drvdata(dev);
+
+	check_scoop_reg(sdev);
+	SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr;
 
-		check_scoop_reg(sdev);
-		SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr;
-	}
 	return 0;
 }
 #else

arch/arm/mach-pxa/corgi_ssp.c

@@ -222,24 +222,22 @@ static int corgi_ssp_remove(struct device *dev)
 	return 0;
 }
 
-static int corgi_ssp_suspend(struct device *dev, pm_message_t state, u32 level)
+static int corgi_ssp_suspend(struct device *dev, pm_message_t state)
 {
-	if (level == SUSPEND_POWER_DOWN) {
-		ssp_flush(&corgi_ssp_dev);
-		ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state);
-	}
+	ssp_flush(&corgi_ssp_dev);
+	ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state);
+
 	return 0;
 }
 
-static int corgi_ssp_resume(struct device *dev, u32 level)
+static int corgi_ssp_resume(struct device *dev)
 {
-	if (level == RESUME_POWER_ON) {
-		GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);  /* High - Disable LCD Control/Timing Gen */
-		GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/
-		GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/
-		ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state);
-		ssp_enable(&corgi_ssp_dev);
-	}
+	GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);  /* High - Disable LCD Control/Timing Gen */
+	GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/
+	GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/
+	ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state);
+	ssp_enable(&corgi_ssp_dev);
+
 	return 0;
 }
 

arch/arm/mach-sa1100/neponset.c

@@ -178,33 +178,27 @@ static int neponset_probe(struct device *dev)
 /*
  * LDM power management.
  */
-static int neponset_suspend(struct device *dev, pm_message_t state, u32 level)
+static int neponset_suspend(struct device *dev, pm_message_t state)
 {
 	/*
 	 * Save state.
 	 */
-	if (level == SUSPEND_SAVE_STATE ||
-	    level == SUSPEND_DISABLE ||
-	    level == SUSPEND_POWER_DOWN) {
-		if (!dev->power.saved_state)
-			dev->power.saved_state = kmalloc(sizeof(unsigned int), GFP_KERNEL);
-		if (!dev->power.saved_state)
-			return -ENOMEM;
-
-		*(unsigned int *)dev->power.saved_state = NCR_0;
-	}
+	if (!dev->power.saved_state)
+		dev->power.saved_state = kmalloc(sizeof(unsigned int), GFP_KERNEL);
+	if (!dev->power.saved_state)
+		return -ENOMEM;
+
+	*(unsigned int *)dev->power.saved_state = NCR_0;
 
 	return 0;
 }
 
-static int neponset_resume(struct device *dev, u32 level)
+static int neponset_resume(struct device *dev)
 {
-	if (level == RESUME_RESTORE_STATE || level == RESUME_ENABLE) {
-		if (dev->power.saved_state) {
-			NCR_0 = *(unsigned int *)dev->power.saved_state;
-			kfree(dev->power.saved_state);
-			dev->power.saved_state = NULL;
-		}
+	if (dev->power.saved_state) {
+		NCR_0 = *(unsigned int *)dev->power.saved_state;
+		kfree(dev->power.saved_state);
+		dev->power.saved_state = NULL;
 	}
 
 	return 0;

arch/i386/kernel/cpuid.c

@@ -163,7 +163,7 @@ static int cpuid_class_device_create(int i)
 	int err = 0;
 	struct class_device *class_err;
 
-	class_err = class_device_create(cpuid_class, MKDEV(CPUID_MAJOR, i), NULL, "cpu%d",i);
+	class_err = class_device_create(cpuid_class, NULL, MKDEV(CPUID_MAJOR, i), NULL, "cpu%d",i);
 	if (IS_ERR(class_err))
 		err = PTR_ERR(class_err);
 	return err;

arch/i386/kernel/msr.c

@@ -246,7 +246,7 @@ static int msr_class_device_create(int i)
 	int err = 0;
 	struct class_device *class_err;
 
-	class_err = class_device_create(msr_class, MKDEV(MSR_MAJOR, i), NULL, "msr%d",i);
+	class_err = class_device_create(msr_class, NULL, MKDEV(MSR_MAJOR, i), NULL, "msr%d",i);
 	if (IS_ERR(class_err)) 
 		err = PTR_ERR(class_err);
 	return err;

drivers/base/attribute_container.c

@@ -19,6 +19,8 @@
 #include <linux/list.h>
 #include <linux/module.h>
 
+#include "base.h"
+
 /* This is a private structure used to tie the classdev and the
  * container .. it should never be visible outside this file */
 struct internal_container {

drivers/base/base.h

@@ -1,3 +1,15 @@
+
+/* initialisation functions */
+
+extern int devices_init(void);
+extern int buses_init(void);
+extern int classes_init(void);
+extern int firmware_init(void);
+extern int platform_bus_init(void);
+extern int system_bus_init(void);
+extern int cpu_dev_init(void);
+extern int attribute_container_init(void);
+
 extern int bus_add_device(struct device * dev);
 extern void bus_remove_device(struct device * dev);