Merge tag 'platform-drivers-x86-v6.12-1' of git://git.kernel.org/pub/…

…scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform drivers updates from Hans de Goede:

 - asus-wmi: Add support for vivobook fan profiles

 - dell-laptop: Add knobs to change battery charge settings

 - lg-laptop: Add operation region support

 - intel-uncore-freq: Add support for efficiency latency control

 - intel/ifs: Add SBAF test support

 - intel/pmc: Ignore all LTRs during suspend

 - platform/surface: Support for arm64 based Surface devices

 - wmi: Pass event data directly to legacy notify handlers

 - x86/platform/geode: switch GPIO buttons and LEDs to software
   properties

 - bunch of small cleanups, fixes, hw-id additions, etc.

* tag 'platform-drivers-x86-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits)
  MAINTAINERS: adjust file entry in INTEL MID PLATFORM
  platform/x86: x86-android-tablets: Adjust Xiaomi Pad 2 bottom bezel touch buttons LED
  platform/mellanox: mlxbf-pmc: fix lockdep warning
  platform/x86/amd: pmf: Add quirk for TUF Gaming A14
  platform/x86: touchscreen_dmi: add nanote-next quirk
  platform/x86: asus-wmi: don't fail if platform_profile already registered
  platform/x86: asus-wmi: add debug print in more key places
  platform/x86: intel_scu_wdt: Move intel_scu_wdt.h to x86 subfolder
  platform/x86: intel_scu_ipc: Move intel_scu_ipc.h out of arch/x86/include/asm
  MAINTAINERS: Add Intel MID section
  platform/x86: panasonic-laptop: Add support for programmable buttons
  platform/olpc: Remove redundant null pointer checks in olpc_ec_setup_debugfs()
  platform/x86: intel/pmc: Ignore all LTRs during suspend
  platform/x86: wmi: Call both legacy and WMI driver notify handlers
  platform/x86: wmi: Merge get_event_data() with wmi_get_notify_data()
  platform/x86: wmi: Remove wmi_get_event_data()
  platform/x86: wmi: Pass event data directly to legacy notify handlers
  platform/x86: thinkpad_acpi: Fix uninitialized symbol 's' warning
  platform/x86: x86-android-tablets: Fix spelling in the comments
  platform/x86: ideapad-laptop: Make the scope_guard() clear of its scope
  ...

Documentation/admin-guide/pm/intel_uncore_frequency_scaling.rst

@@ -113,3 +113,62 @@ to apply at each uncore* level.
 
 Support for "current_freq_khz" is available only at each fabric cluster
 level (i.e., in uncore* directory).
+
+Efficiency vs. Latency Tradeoff
+-------------------------------
+
+The Efficiency Latency Control (ELC) feature improves performance
+per watt. With this feature hardware power management algorithms
+optimize trade-off between latency and power consumption. For some
+latency sensitive workloads further tuning can be done by SW to
+get desired performance.
+
+The hardware monitors the average CPU utilization across all cores
+in a power domain at regular intervals and decides an uncore frequency.
+While this may result in the best performance per watt, workload may be
+expecting higher performance at the expense of power. Consider an
+application that intermittently wakes up to perform memory reads on an
+otherwise idle system. In such cases, if hardware lowers uncore
+frequency, then there may be delay in ramp up of frequency to meet
+target performance.
+
+The ELC control defines some parameters which can be changed from SW.
+If the average CPU utilization is below a user-defined threshold
+(elc_low_threshold_percent attribute below), the user-defined uncore
+floor frequency will be used (elc_floor_freq_khz attribute below)
+instead of hardware calculated minimum.
+
+Similarly in high load scenario where the CPU utilization goes above
+the high threshold value (elc_high_threshold_percent attribute below)
+instead of jumping to maximum uncore frequency, frequency is increased
+in 100MHz steps. This avoids consuming unnecessarily high power
+immediately with CPU utilization spikes.
+
+Attributes for efficiency latency control:
+
+``elc_floor_freq_khz``
+	This attribute is used to get/set the efficiency latency floor frequency.
+	If this variable is lower than the 'min_freq_khz', it is ignored by
+	the firmware.
+
+``elc_low_threshold_percent``
+	This attribute is used to get/set the efficiency latency control low
+	threshold. This attribute is in percentages of CPU utilization.
+
+``elc_high_threshold_percent``
+	This attribute is used to get/set the efficiency latency control high
+	threshold. This attribute is in percentages of CPU utilization.
+
+``elc_high_threshold_enable``
+	This attribute is used to enable/disable the efficiency latency control
+	high threshold. Write '1' to enable, '0' to disable.
+
+Example system configuration below, which does following:
+  * when CPU utilization is less than 10%: sets uncore frequency to 800MHz
+  * when CPU utilization is higher than 95%: increases uncore frequency in
+    100MHz steps, until power limit is reached
+
+  elc_floor_freq_khz:800000
+  elc_high_threshold_percent:95
+  elc_high_threshold_enable:1
+  elc_low_threshold_percent:10

Documentation/devicetree/bindings/platform/microsoft,surface-sam.yaml

@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/platform/microsoft,surface-sam.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Surface System Aggregator Module (SAM, SSAM)
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description: |
+  Surface devices use a standardized embedded controller to let the
+  operating system interface with various hardware functions. The
+  specific functionalities are modeled as subdevices and matched on
+  five levels: domain, category, target, instance and function.
+
+properties:
+  compatible:
+    const: microsoft,surface-sam
+
+  interrupts:
+    maxItems: 1
+
+  current-speed: true
+
+required:
+  - compatible
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    uart {
+        embedded-controller {
+            compatible = "microsoft,surface-sam";
+
+            interrupts-extended = <&tlmm 91 IRQ_TYPE_EDGE_RISING>;
+
+            pinctrl-0 = <&ssam_state>;
+            pinctrl-names = "default";
+
+            current-speed = <4000000>;
+        };
+    };

Documentation/devicetree/bindings/serial/serial.yaml

@@ -88,7 +88,7 @@ properties:
       TX FIFO threshold configuration (in bytes).
 
 patternProperties:
-  "^(bluetooth|bluetooth-gnss|gnss|gps|mcu|onewire)$":
+  "^(bluetooth|bluetooth-gnss|embedded-controller|gnss|gps|mcu|onewire)$":
     if:
       type: object
     then:

MAINTAINERS

@@ -11552,6 +11552,24 @@ S:	Maintained
 F:	Documentation/ABI/testing/sysfs-driver-intel-m10-bmc-sec-update
 F:	drivers/fpga/intel-m10-bmc-sec-update.c
 
+INTEL MID (Mobile Internet Device) PLATFORM
+M:	Andy Shevchenko <andy@kernel.org>
+L:	linux-kernel@vger.kernel.org
+S:	Supported
+F:	arch/x86/include/asm/intel-mid.h
+F:	arch/x86/pci/intel_mid_pci.c
+F:	arch/x86/platform/intel-mid/
+F:	drivers/extcon/extcon-intel-mrfld.c
+F:	drivers/iio/adc/intel_mrfld_adc.c
+F:	drivers/mfd/intel_soc_pmic_mrfld.c
+F:	drivers/platform/x86/intel/mrfld_pwrbtn.c
+F:	drivers/platform/x86/intel_scu_*
+F:	drivers/staging/media/atomisp/
+F:	drivers/watchdog/intel-mid_wdt.c
+F:	include/linux/mfd/intel_soc_pmic_mrfld.h
+F:	include/linux/platform_data/x86/intel-mid_wdt.h
+F:	include/linux/platform_data/x86/intel_scu_ipc.h
+
 INTEL P-Unit IPC DRIVER
 M:	Zha Qipeng <qipeng.zha@intel.com>
 L:	platform-driver-x86@vger.kernel.org
@@ -11614,8 +11632,8 @@ F:	drivers/counter/intel-qep.c
 INTEL SCU DRIVERS
 M:	Mika Westerberg <mika.westerberg@linux.intel.com>
 S:	Maintained
-F:	arch/x86/include/asm/intel_scu_ipc.h
 F:	drivers/platform/x86/intel_scu_*
+F:	include/linux/platform_data/x86/intel_scu_ipc.h
 
 INTEL SDSI DRIVER
 M:	David E. Box <david.e.box@linux.intel.com>
@@ -11690,7 +11708,8 @@ F:	drivers/platform/x86/intel/uncore-frequency/
 INTEL VENDOR SPECIFIC EXTENDED CAPABILITIES DRIVER
 M:	David E. Box <david.e.box@linux.intel.com>
 S:	Supported
-F:	drivers/platform/x86/intel/vsec.*
+F:	drivers/platform/x86/intel/vsec.c
+F:	include/linux/intel_vsec.h
 
 INTEL VIRTUAL BUTTON DRIVER
 M:	AceLan Kao <acelan.kao@canonical.com>

arch/x86/Kconfig

@@ -3076,9 +3076,13 @@ config OLPC_XO15_SCI
 	   - AC adapter status updates
 	   - Battery status updates
 
+config GEODE_COMMON
+	bool
+
 config ALIX
 	bool "PCEngines ALIX System Support (LED setup)"
 	select GPIOLIB
+	select GEODE_COMMON
 	help
 	  This option enables system support for the PCEngines ALIX.
 	  At present this just sets up LEDs for GPIO control on
@@ -3093,12 +3097,14 @@ config ALIX
 config NET5501
 	bool "Soekris Engineering net5501 System Support (LEDS, GPIO, etc)"
 	select GPIOLIB
+	select GEODE_COMMON
 	help
 	  This option enables system support for the Soekris Engineering net5501.
 
 config GEOS
 	bool "Traverse Technologies GEOS System Support (LEDS, GPIO, etc)"
 	select GPIOLIB
+	select GEODE_COMMON
 	depends on DMI
 	help
 	  This option enables system support for the Traverse Technologies GEOS.

arch/x86/include/asm/intel_telemetry.h

@@ -10,7 +10,7 @@
 #define TELEM_MAX_EVENTS_SRAM		28
 #define TELEM_MAX_OS_ALLOCATED_EVENTS	20
 
-#include <asm/intel_scu_ipc.h>
+#include <linux/platform_data/x86/intel_scu_ipc.h>
 
 enum telemetry_unit {
 	TELEM_PSS = 0,

arch/x86/include/asm/msr-index.h

@@ -247,6 +247,8 @@
 #define MSR_INTEGRITY_CAPS_ARRAY_BIST          BIT(MSR_INTEGRITY_CAPS_ARRAY_BIST_BIT)
 #define MSR_INTEGRITY_CAPS_PERIODIC_BIST_BIT	4
 #define MSR_INTEGRITY_CAPS_PERIODIC_BIST	BIT(MSR_INTEGRITY_CAPS_PERIODIC_BIST_BIT)
+#define MSR_INTEGRITY_CAPS_SBAF_BIT		8
+#define MSR_INTEGRITY_CAPS_SBAF			BIT(MSR_INTEGRITY_CAPS_SBAF_BIT)
 #define MSR_INTEGRITY_CAPS_SAF_GEN_MASK	GENMASK_ULL(10, 9)
 
 #define MSR_LBR_NHM_FROM		0x00000680

arch/x86/platform/geode/Makefile

@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_GEODE_COMMON)	+= geode-common.o
 obj-$(CONFIG_ALIX)		+= alix.o
 obj-$(CONFIG_NET5501)		+= net5501.o
 obj-$(CONFIG_GEOS)		+= geos.o

arch/x86/platform/geode/alix.c

@@ -18,15 +18,12 @@
 #include <linux/io.h>
 #include <linux/string.h>
 #include <linux/moduleparam.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio/machine.h>
 #include <linux/dmi.h>
 
 #include <asm/geode.h>
 
+#include "geode-common.h"
+
 #define BIOS_SIGNATURE_TINYBIOS		0xf0000
 #define BIOS_SIGNATURE_COREBOOT		0x500
 #define BIOS_REGION_SIZE		0x10000
@@ -41,79 +38,16 @@ module_param(force, bool, 0444);
 /* FIXME: Award bios is not automatically detected as Alix platform */
 MODULE_PARM_DESC(force, "Force detection as ALIX.2/ALIX.3 platform");
 
-static struct gpio_keys_button alix_gpio_buttons[] = {
-	{
-		.code			= KEY_RESTART,
-		.gpio			= 24,
-		.active_low		= 1,
-		.desc			= "Reset button",
-		.type			= EV_KEY,
-		.wakeup			= 0,
-		.debounce_interval	= 100,
-		.can_disable		= 0,
-	}
-};
-static struct gpio_keys_platform_data alix_buttons_data = {
-	.buttons			= alix_gpio_buttons,
-	.nbuttons			= ARRAY_SIZE(alix_gpio_buttons),
-	.poll_interval			= 20,
-};
-
-static struct platform_device alix_buttons_dev = {
-	.name				= "gpio-keys-polled",
-	.id				= 1,
-	.dev = {
-		.platform_data		= &alix_buttons_data,
-	}
-};
-
-static struct gpio_led alix_leds[] = {
-	{
-		.name = "alix:1",
-		.default_trigger = "default-on",
-	},
-	{
-		.name = "alix:2",
-		.default_trigger = "default-off",
-	},
-	{
-		.name = "alix:3",
-		.default_trigger = "default-off",
-	},
-};
-
-static struct gpio_led_platform_data alix_leds_data = {
-	.num_leds = ARRAY_SIZE(alix_leds),
-	.leds = alix_leds,
-};
-
-static struct gpiod_lookup_table alix_leds_gpio_table = {
-	.dev_id = "leds-gpio",
-	.table = {
-		/* The Geode GPIOs should be on the CS5535 companion chip */
-		GPIO_LOOKUP_IDX("cs5535-gpio", 6, NULL, 0, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("cs5535-gpio", 25, NULL, 1, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("cs5535-gpio", 27, NULL, 2, GPIO_ACTIVE_LOW),
-		{ }
-	},
-};
-
-static struct platform_device alix_leds_dev = {
-	.name = "leds-gpio",
-	.id = -1,
-	.dev.platform_data = &alix_leds_data,
-};
-
-static struct platform_device *alix_devs[] __initdata = {
-	&alix_buttons_dev,
-	&alix_leds_dev,
+static const struct geode_led alix_leds[] __initconst = {
+	{ 6, true },
+	{ 25, false },
+	{ 27, false },
 };
 
 static void __init register_alix(void)
 {
-	/* Setup LED control through leds-gpio driver */
-	gpiod_add_lookup_table(&alix_leds_gpio_table);
-	platform_add_devices(alix_devs, ARRAY_SIZE(alix_devs));
+	geode_create_restart_key(24);
+	geode_create_leds("alix", alix_leds, ARRAY_SIZE(alix_leds));
 }
 
 static bool __init alix_present(unsigned long bios_phys,