dpaa_eth: use a page to store the SGT

Use a page to store the scatter gather table on the transmit path.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/freescale/dpaa/dpaa_eth.c

@@ -1592,9 +1592,9 @@ static struct sk_buff *dpaa_cleanup_tx_fd(const struct dpaa_priv *priv,
 	int i;
 
 	if (unlikely(qm_fd_get_format(fd) == qm_fd_sg)) {
-		dma_unmap_single(priv->tx_dma_dev, addr,
-				 qm_fd_get_offset(fd) + DPAA_SGT_SIZE,
-				 dma_dir);
+		dma_unmap_page(priv->tx_dma_dev, addr,
+			       qm_fd_get_offset(fd) + DPAA_SGT_SIZE,
+			       dma_dir);
 
 		/* The sgt buffer has been allocated with netdev_alloc_frag(),
 		 * it's from lowmem.
@@ -1636,8 +1636,8 @@ static struct sk_buff *dpaa_cleanup_tx_fd(const struct dpaa_priv *priv,
 	}
 
 	if (qm_fd_get_format(fd) == qm_fd_sg)
-		/* Free the page frag that we allocated on Tx */
-		skb_free_frag(vaddr);
+		/* Free the page that we allocated on Tx for the SGT */
+		free_pages((unsigned long)vaddr, 0);
 
 	return skb;
 }
@@ -1885,29 +1885,28 @@ static int skb_to_sg_fd(struct dpaa_priv *priv,
 	struct net_device *net_dev = priv->net_dev;
 	struct qm_sg_entry *sgt;
 	struct sk_buff **skbh;
-	int i, j, err, sz;
-	void *buffer_start;
+	void *buff_start;
 	skb_frag_t *frag;
 	dma_addr_t addr;
 	size_t frag_len;
-	void *sgt_buf;
-
-	/* get a page frag to store the SGTable */
-	sz = SKB_DATA_ALIGN(priv->tx_headroom + DPAA_SGT_SIZE);
-	sgt_buf = netdev_alloc_frag(sz);
-	if (unlikely(!sgt_buf)) {
-		netdev_err(net_dev, "netdev_alloc_frag() failed for size %d\n",
-			   sz);
+	struct page *p;
+	int i, j, err;
+
+	/* get a page to store the SGTable */
+	p = dev_alloc_pages(0);
+	if (unlikely(!p)) {
+		netdev_err(net_dev, "dev_alloc_pages() failed\n");
 		return -ENOMEM;
 	}
+	buff_start = page_address(p);
 
 	/* Enable L3/L4 hardware checksum computation.
 	 *
 	 * We must do this before dma_map_single(DMA_TO_DEVICE), because we may
 	 * need to write into the skb.
 	 */
 	err = dpaa_enable_tx_csum(priv, skb, fd,
-				  sgt_buf + DPAA_TX_PRIV_DATA_SIZE);
+				  buff_start + DPAA_TX_PRIV_DATA_SIZE);
 	if (unlikely(err < 0)) {
 		if (net_ratelimit())
 			netif_err(priv, tx_err, net_dev, "HW csum error: %d\n",
@@ -1916,7 +1915,7 @@ static int skb_to_sg_fd(struct dpaa_priv *priv,
 	}
 
 	/* SGT[0] is used by the linear part */
-	sgt = (struct qm_sg_entry *)(sgt_buf + priv->tx_headroom);
+	sgt = (struct qm_sg_entry *)(buff_start + priv->tx_headroom);
 	frag_len = skb_headlen(skb);
 	qm_sg_entry_set_len(&sgt[0], frag_len);
 	sgt[0].bpid = FSL_DPAA_BPID_INV;
@@ -1954,15 +1953,15 @@ static int skb_to_sg_fd(struct dpaa_priv *priv,
 	/* Set the final bit in the last used entry of the SGT */
 	qm_sg_entry_set_f(&sgt[nr_frags], frag_len);
 
+	/* set fd offset to priv->tx_headroom */
 	qm_fd_set_sg(fd, priv->tx_headroom, skb->len);
 
 	/* DMA map the SGT page */
-	buffer_start = (void *)sgt - priv->tx_headroom;
-	skbh = (struct sk_buff **)buffer_start;
+	skbh = (struct sk_buff **)buff_start;
 	*skbh = skb;
 
-	addr = dma_map_single(priv->tx_dma_dev, buffer_start,
-			      priv->tx_headroom + DPAA_SGT_SIZE, dma_dir);
+	addr = dma_map_page(priv->tx_dma_dev, p, 0,
+			    priv->tx_headroom + DPAA_SGT_SIZE, dma_dir);
 	if (unlikely(dma_mapping_error(priv->tx_dma_dev, addr))) {
 		netdev_err(priv->net_dev, "DMA mapping failed\n");
 		err = -EINVAL;
@@ -1982,7 +1981,7 @@ static int skb_to_sg_fd(struct dpaa_priv *priv,
 			       qm_sg_entry_get_len(&sgt[j]), dma_dir);
 sg0_map_failed:
 csum_failed:
-	skb_free_frag(sgt_buf);
+	free_pages((unsigned long)buff_start, 0);
 
 	return err;
 }