Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (241 commits)
  [ARM] 5171/1: ep93xx: fix compilation of modules using clocks
  [ARM] 5133/2: at91sam9g20 defconfig file
  [ARM] 5130/4: Support for the at91sam9g20
  [ARM] 5160/1: IOP3XX: gpio/gpiolib support
  [ARM] at91: Fix NAND FLASH timings for at91sam9x evaluation kits.
  [ARM] 5084/1: zylonite: Register AC97 device
  [ARM] 5085/2: PXA: Move AC97 over to the new central device declaration model
  [ARM] 5120/1: pxa: correct platform driver names for PXA25x and PXA27x UDC drivers
  [ARM] 5147/1: pxaficp_ir: drop pxa_gpio_mode calls, as pin setting
  [ARM] 5145/1: PXA2xx: provide api to control IrDA pins state
  [ARM] 5144/1: pxaficp_ir: cleanup includes
  [ARM] pxa: remove pxa_set_cken()
  [ARM] pxa: allow clk aliases
  [ARM] Feroceon: don't disable BPU on boot
  [ARM] Orion: LED support for HP mv2120
  [ARM] Orion: add RD88F5181L-FXO support
  [ARM] Orion: add RD88F5181L-GE support
  [ARM] Orion: add Netgear WNR854T support
  [ARM] s3c2410_defconfig: update for current build
  [ARM] Acer n30: Minor style and indentation fixes.
  ...

Documentation/kernel-parameters.txt

@@ -1242,6 +1242,11 @@ and is between 256 and 4096 characters. It is defined in the file
 	mtdparts=	[MTD]
 			See drivers/mtd/cmdlinepart.c.
 
+	mtdset=		[ARM]
+			ARM/S3C2412 JIVE boot control
+
+			See arch/arm/mach-s3c2412/mach-jive.c
+
 	mtouchusb.raw_coordinates=
 			[HW] Make the MicroTouch USB driver use raw coordinates
 			('y', default) or cooked coordinates ('n')

arch/arm/Kconfig

@@ -24,6 +24,9 @@ config ARM
 	  Europe.  There is an ARM Linux project with a web page at
 	  <http://www.arm.linux.org.uk/>.
 
+config HAVE_PWM
+	bool
+
 config SYS_SUPPORTS_APM_EMULATION
 	bool
 
@@ -86,6 +89,11 @@ config STACKTRACE_SUPPORT
 	bool
 	default y
 
+config HAVE_LATENCYTOP_SUPPORT
+	bool
+	depends on !SMP
+	default y
+
 config LOCKDEP_SUPPORT
 	bool
 	default y
@@ -149,6 +157,10 @@ config FIQ
 config ARCH_MTD_XIP
 	bool
 
+config GENERIC_HARDIRQS_NO__DO_IRQ
+	bool
+	def_bool y
+
 if OPROFILE
 
 config OPROFILE_ARMV6
@@ -234,13 +246,6 @@ config ARCH_CLPS711X
 	help
 	  Support for Cirrus Logic 711x/721x based boards.
 
-config ARCH_CO285
-	bool "Co-EBSA285"
-	select FOOTBRIDGE
-	select FOOTBRIDGE_ADDIN
-	help
-	  Support for Intel's EBSA285 companion chip.
-
 config ARCH_EBSA110
 	bool "EBSA-110"
 	select ISA
@@ -301,6 +306,8 @@ config ARCH_IOP32X
 	depends on MMU
 	select PLAT_IOP
 	select PCI
+	select GENERIC_GPIO
+	select HAVE_GPIO_LIB
 	help
 	  Support for Intel's 80219 and IOP32X (XScale) family of
 	  processors.
@@ -310,6 +317,8 @@ config ARCH_IOP33X
 	depends on MMU
 	select PLAT_IOP
 	select PCI
+	select GENERIC_GPIO
+	select HAVE_GPIO_LIB
 	help
 	  Support for Intel's IOP33X (XScale) family of processors.
 
@@ -349,6 +358,16 @@ config ARCH_L7200
 	  If you have any questions or comments about the Linux kernel port
 	  to this board, send e-mail to <sjhill@cotw.com>.
 
+config ARCH_KIRKWOOD
+	bool "Marvell Kirkwood"
+	select PCI
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select PLAT_ORION
+	help
+	  Support for the following Marvell Kirkwood series SoCs:
+	  88F6180, 88F6192 and 88F6281.
+
 config ARCH_KS8695
 	bool "Micrel/Kendin KS8695"
 	select GENERIC_GPIO
@@ -367,9 +386,31 @@ config ARCH_NS9XXX
 
 	  <http://www.digi.com/products/microprocessors/index.jsp>
 
+config ARCH_LOKI
+	bool "Marvell Loki (88RC8480)"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select PLAT_ORION
+	help
+	  Support for the Marvell Loki (88RC8480) SoC.
+
+config ARCH_MV78XX0
+	bool "Marvell MV78xx0"
+	select PCI
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select PLAT_ORION
+	help
+	  Support for the following Marvell MV78xx0 series SoCs:
+	  MV781x0, MV782x0.
+
 config ARCH_MXC
 	bool "Freescale MXC/iMX-based"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
 	select ARCH_MTD_XIP
+	select GENERIC_GPIO
+	select HAVE_GPIO_LIB
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 
@@ -383,7 +424,8 @@ config ARCH_ORION5X
 	select PLAT_ORION
 	help
 	  Support for the following Marvell Orion 5x series SoCs:
-	  Orion-1 (5181), Orion-NAS (5182), Orion-2 (5281.)
+	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
+	  Orion-2 (5281).
 
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
@@ -408,6 +450,7 @@ config ARCH_RPC
 	select FIQ
 	select TIMER_ACORN
 	select ARCH_MAY_HAVE_PC_FDC
+	select HAVE_PATA_PLATFORM
 	select ISA_DMA_API
 	select NO_IOPORT
 	help
@@ -504,6 +547,10 @@ source "arch/arm/mach-ixp2000/Kconfig"
 
 source "arch/arm/mach-ixp23xx/Kconfig"
 
+source "arch/arm/mach-loki/Kconfig"
+
+source "arch/arm/mach-mv78xx0/Kconfig"
+
 source "arch/arm/mach-pxa/Kconfig"
 
 source "arch/arm/mach-sa1100/Kconfig"
@@ -516,6 +563,8 @@ source "arch/arm/mach-omap2/Kconfig"
 
 source "arch/arm/mach-orion5x/Kconfig"
 
+source "arch/arm/mach-kirkwood/Kconfig"
+
 source "arch/arm/plat-s3c24xx/Kconfig"
 source "arch/arm/plat-s3c/Kconfig"
 
@@ -705,27 +754,6 @@ config PREEMPT
 	  Say Y here if you are building a kernel for a desktop, embedded
 	  or real-time system.  Say N if you are unsure.
 
-config NO_IDLE_HZ
-	bool "Dynamic tick timer"
-	depends on !GENERIC_CLOCKEVENTS
-	help
-	  Select this option if you want to disable continuous timer ticks
-	  and have them programmed to occur as required. This option saves
-	  power as the system can remain in idle state for longer.
-
-	  By default dynamic tick is disabled during the boot, and can be
-	  manually enabled with:
-
-	    echo 1 > /sys/devices/system/timer/timer0/dyn_tick
-
-	  Alternatively, if you want dynamic tick automatically enabled
-	  during boot, pass "dyntick=enable" via the kernel command string.
-
-	  Please note that dynamic tick may affect the accuracy of
-	  timekeeping on some platforms depending on the implementation.
-	  Currently at least OMAP, PXA2xx and SA11x0 platforms are known
-	  to have accurate timekeeping with dynamic tick.
-
 config HZ
 	int
 	default 128 if ARCH_L7200
@@ -791,7 +819,7 @@ source "mm/Kconfig"
 
 config LEDS
 	bool "Timer and CPU usage LEDs"
-	depends on ARCH_CDB89712 || ARCH_CO285 || ARCH_EBSA110 || \
+	depends on ARCH_CDB89712 || ARCH_EBSA110 || \
 		   ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
 		   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
 		   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \

arch/arm/Makefile

@@ -100,8 +100,6 @@ textofs-y	:= 0x00008000
   incdir-$(CONFIG_ARCH_CLPS7500)   := cl7500
  machine-$(CONFIG_FOOTBRIDGE)	   := footbridge
   incdir-$(CONFIG_FOOTBRIDGE)	   := ebsa285
- machine-$(CONFIG_ARCH_CO285)	   := footbridge
-  incdir-$(CONFIG_ARCH_CO285)	   := ebsa285
  machine-$(CONFIG_ARCH_SHARK)	   := shark
  machine-$(CONFIG_ARCH_SA1100)	   := sa1100
 ifeq ($(CONFIG_ARCH_SA1100),y)
@@ -135,11 +133,15 @@ endif
  machine-$(CONFIG_ARCH_NETX)	   := netx
  machine-$(CONFIG_ARCH_NS9XXX)	   := ns9xxx
  machine-$(CONFIG_ARCH_DAVINCI)	   := davinci
+ machine-$(CONFIG_ARCH_KIRKWOOD)   := kirkwood
  machine-$(CONFIG_ARCH_KS8695)     := ks8695
   incdir-$(CONFIG_ARCH_MXC)	   := mxc
+ machine-$(CONFIG_ARCH_MX2)	   := mx2
  machine-$(CONFIG_ARCH_MX3)	   := mx3
  machine-$(CONFIG_ARCH_ORION5X)	   := orion5x
  machine-$(CONFIG_ARCH_MSM7X00A)   := msm
+ machine-$(CONFIG_ARCH_LOKI)       := loki
+ machine-$(CONFIG_ARCH_MV78XX0)    := mv78xx0
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.
@@ -190,8 +192,6 @@ core-$(CONFIG_PLAT_S3C24XX)		+= arch/arm/plat-s3c24xx/
 core-$(CONFIG_ARCH_MXC)		+= arch/arm/plat-mxc/
 
 drivers-$(CONFIG_OPROFILE)      += arch/arm/oprofile/
-drivers-$(CONFIG_ARCH_CLPS7500)	+= drivers/acorn/char/
-drivers-$(CONFIG_ARCH_L7200)	+= drivers/acorn/char/
 
 libs-y				:= arch/arm/lib/ $(libs-y)
 

arch/arm/boot/compressed/head.S

@@ -623,8 +623,8 @@ proc_types:
 		b	__armv4_mmu_cache_off
 		b	__armv4_mmu_cache_flush
 
-		.word	0x56055310		@ Feroceon
-		.word	0xfffffff0
+		.word	0x56050000		@ Feroceon
+		.word	0xff0f0000
 		b	__armv4_mmu_cache_on
 		b	__armv4_mmu_cache_off
 		b	__armv5tej_mmu_cache_flush

arch/arm/common/Makefile

@@ -2,7 +2,6 @@
 # Makefile for the linux kernel.
 #
 
-obj-y				+= rtctime.o
 obj-$(CONFIG_ARM_GIC)		+= gic.o
 obj-$(CONFIG_ARM_VIC)		+= vic.o
 obj-$(CONFIG_ICST525)		+= icst525.o