Merge tag 'armsoc-fixes-v5.7' of git://git.kernel.org/pub/scm/linux/k…

…ernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "This time there is one fix for the error path in the mediatek cmdq driver (used by their video driver) and a couple of devicetree fixes, mostly for 32-bit ARM, and fairly harmless: - On OMAP2 there were a few regressions in the ethernet drivers, one of them leading to an external abort trap - One Raspberry Pi version had a misconfigured LED - Interrupts on Broadcom NSP were slightly misconfigured - One i.MX6q board had issues with graphics mode setting - On mmp3 there are some minor fixes that were submitted for v5.8 with a cc:stable tag, so I ended up picking them up here as well - The Mediatek Video Codec needs to run at a higher frequency than configured originally" * tag 'armsoc-fixes-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: dts: mmp3: Drop usb-nop-xceiv from HSIC phy ARM: dts: mmp3-dell-ariel: Fix the SPI devices ARM: dts: mmp3: Use the MMP3 compatible string for /clocks ARM: dts: bcm: HR2: Fix PPI interrupt types ARM: dts: bcm2835-rpi-zero-w: Fix led polarity ARM: dts/imx6q-bx50v3: Set display interface clock parents soc: mediatek: cmdq: return send msg error code arm64: dts: mt8173: fix vcodec-enc clock ARM: dts: Fix wrong mdio clock for dm814x ARM: dts: am437x: fix networking on boards with ksz9031 phy ARM: dts: am57xx: fix networking on boards with ksz9031 phy
mariux64 · May 29, 2020 · 8685217 · 8685217
2 parents e2fce15 + 99706d6
commit 8685217
Show file tree

Hide file tree

Showing 17 changed files with 44 additions and 54 deletions.
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -943,7 +943,7 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 };
 
 &elm {

diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -504,7 +504,7 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 };
 
 &rtc {

diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -833,13 +833,13 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
 	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	dual_emac_res_vlan = <2>;
 };
 

diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
@@ -190,13 +190,13 @@
 
 &cpsw_port1 {
 	phy-handle = <&ethphy0_sw>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	ti,dual-emac-pvid = <1>;
 };
 
 &cpsw_port2 {
 	phy-handle = <&ethphy1_sw>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	ti,dual-emac-pvid = <2>;
 };
 

diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -433,13 +433,13 @@
 
 &cpsw_emac0 {
 	phy-handle = <&phy0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	dual_emac_res_vlan = <2>;
 };
 

diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -408,13 +408,13 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
 	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	dual_emac_res_vlan = <2>;
 };
 

diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi
@@ -75,23 +75,23 @@
 		timer@20200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x20200 0x100>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&periph_clk>;
 		};
 
 		twd-timer@20600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x20600 0x20>;
 			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) |
-						  IRQ_TYPE_LEVEL_HIGH)>;
+						  IRQ_TYPE_EDGE_RISING)>;
 			clocks = <&periph_clk>;
 		};
 
 		twd-watchdog@20620 {
 			compatible = "arm,cortex-a9-twd-wdt";
 			reg = <0x20620 0x20>;
 			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) |
-						  IRQ_TYPE_LEVEL_HIGH)>;
+						  IRQ_TYPE_EDGE_RISING)>;
 			clocks = <&periph_clk>;
 		};
 

diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -24,7 +24,7 @@
 
 	leds {
 		act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 		};
 	};
 

diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
@@ -693,7 +693,7 @@
 
 					davinci_mdio: mdio@800 {
 						compatible = "ti,cpsw-mdio", "ti,davinci_mdio";
-						clocks = <&alwon_ethernet_clkctrl DM814_ETHERNET_CPGMAC0_CLKCTRL 0>;
+						clocks = <&cpsw_125mhz_gclk>;
 						clock-names = "fck";
 						#address-cells = <1>;
 						#size-cells = <0>;

diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts
@@ -65,13 +65,6 @@
 	};
 };
 
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
 &ldb {
 	status = "okay";
 

diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts
@@ -65,13 +65,6 @@
 	};
 };
 
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
 &ldb {
 	status = "okay";
 

diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts
@@ -53,17 +53,6 @@
 	};
 };
 
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
-			  <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
-			  <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
-				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
-				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
-				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>;
-};
-
 &ldb {
 	fsl,dual-channel;
 	status = "okay";

diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
@@ -377,3 +377,18 @@
 		#interrupt-cells = <1>;
 	};
 };
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+			  <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
+			  <&clks IMX6QDL_CLK_IPU1_DI1_PRE_SEL>,
+			  <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>,
+			  <&clks IMX6QDL_CLK_IPU2_DI1_PRE_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>;
+};
diff --git a/arch/arm/boot/dts/mmp3-dell-ariel.dts b/arch/arm/boot/dts/mmp3-dell-ariel.dts
@@ -98,19 +98,19 @@
 	status = "okay";
 };
 
-&ssp3 {
+&ssp1 {
 	status = "okay";
-	cs-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
 
 	firmware-flash@0 {
-		compatible = "st,m25p80", "jedec,spi-nor";
+		compatible = "winbond,w25q32", "jedec,spi-nor";
 		reg = <0>;
-		spi-max-frequency = <40000000>;
+		spi-max-frequency = <104000000>;
 		m25p,fast-read;
 	};
 };
 
-&ssp4 {
-	cs-gpios = <&gpio 56 GPIO_ACTIVE_HIGH>;
+&ssp2 {
+	cs-gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi
@@ -202,8 +202,7 @@
 			};
 
 			hsic_phy0: hsic-phy@f0001800 {
-				compatible = "marvell,mmp3-hsic-phy",
-					     "usb-nop-xceiv";
+				compatible = "marvell,mmp3-hsic-phy";
 				reg = <0xf0001800 0x40>;
 				#phy-cells = <0>;
 				status = "disabled";
@@ -224,8 +223,7 @@
 			};
 
 			hsic_phy1: hsic-phy@f0002800 {
-				compatible = "marvell,mmp3-hsic-phy",
-					     "usb-nop-xceiv";
+				compatible = "marvell,mmp3-hsic-phy";
 				reg = <0xf0002800 0x40>;
 				#phy-cells = <0>;
 				status = "disabled";
@@ -531,7 +529,7 @@
 		};
 
 		soc_clocks: clocks@d4050000 {
-			compatible = "marvell,mmp2-clock";
+			compatible = "marvell,mmp3-clock";
 			reg = <0xd4050000 0x1000>,
 			      <0xd4282800 0x400>,
 			      <0xd4015000 0x1000>;

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -1402,8 +1402,8 @@
 				      "venc_lt_sel";
 			assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>,
 					  <&topckgen CLK_TOP_VENC_LT_SEL>;
-			assigned-clock-parents = <&topckgen CLK_TOP_VENCPLL_D2>,
-						 <&topckgen CLK_TOP_UNIVPLL1_D2>;
+			assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>,
+						 <&topckgen CLK_TOP_VCODECPLL_370P5>;
 		};
 
 		jpegdec: jpegdec@18004000 {

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -351,7 +351,9 @@ int cmdq_pkt_flush_async(struct cmdq_pkt *pkt, cmdq_async_flush_cb cb,
 		spin_unlock_irqrestore(&client->lock, flags);
 	}
 
-	mbox_send_message(client->chan, pkt);
+	err = mbox_send_message(client->chan, pkt);
+	if (err < 0)
+		return err;
 	/* We can send next packet immediately, so just call txdone. */
 	mbox_client_txdone(client->chan, 0);