Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (62 commits)
  Input: atkbd - release previously reserved keycodes 248 - 254
  Input: add KEY_WPS_BUTTON definition
  Input: ads7846 - add regulator support
  Input: winbond-cir - fix suspend/resume
  Input: gamecon - use pr_err() and friends
  Input: gamecon - constify some of the setup structures
  Input: gamecon - simplify pad type handling
  Input: gamecon - simplify coordinate calculation for PSX
  Input: gamecon - fix some formatting issues
  Input: gamecon - add rumble support for N64 pads
  Input: wacom - add device type to device name string
  Input: s3c24xx_ts - report touch only when stylus is down
  Input: s3c24xx_ts - re-enable IRQ on resume
  Input: wacom - constify product features data
  Input: wacom - use per-device instance of wacom_features
  Input: sh_keysc - enable building on SH-Mobile ARM
  Input: wacom - get features from driver info
  Input: rotary-encoder - set gpio direction for each requested gpio
  Input: sh_keysc - update the driver with mode 6
  Input: sh_keysc - switch to using bitmaps
  ...

Documentation/feature-removal-schedule.txt

@@ -538,3 +538,26 @@ Why:	Duplicate functionality with the gspca_zc3xx driver, zc0301 only
 	sensors) wich are also supported by the gspca_zc3xx driver
 	(which supports 53 USB-ID's in total)
 Who:	Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What:	corgikbd, spitzkbd, tosakbd driver
+When:	2.6.35
+Files:	drivers/input/keyboard/{corgi,spitz,tosa}kbd.c
+Why:	We now have a generic GPIO based matrix keyboard driver that
+	are fully capable of handling all the keys on these devices.
+	The original drivers manipulate the GPIO registers directly
+	and so are difficult to maintain.
+Who:	Eric Miao <eric.y.miao@gmail.com>
+
+----------------------------
+
+What:	corgi_ssp and corgi_ts driver
+When:	2.6.35
+Files:	arch/arm/mach-pxa/corgi_ssp.c, drivers/input/touchscreen/corgi_ts.c
+Why:	The corgi touchscreen is now deprecated in favour of the generic
+	ads7846.c driver. The noise reduction technique used in corgi_ts.c,
+	that's to wait till vsync before ADC sampling, is also integrated into
+	ads7846 driver now. Provided that the original driver is not generic
+	and is difficult to maintain, it will be removed later.
+Who:	Eric Miao <eric.y.miao@gmail.com>

Documentation/input/sentelic.txt

@@ -1,5 +1,5 @@
-Copyright (C) 2002-2008 Sentelic Corporation.
-Last update: Oct-31-2008
+Copyright (C) 2002-2010 Sentelic Corporation.
+Last update: Jan-13-2010
 
 ==============================================================================
 * Finger Sensing Pad Intellimouse Mode(scrolling wheel, 4th and 5th buttons)
@@ -44,7 +44,7 @@ B) MSID 6: Horizontal and Vertical scrolling.
 Packet 1
    Bit 7 6 5 4 3 2 1 0       7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0
 BYTE  |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
-  1   |Y|X|y|x|1|M|R|L|  2  |X|X|X|X|X|X|X|X|  3 |Y|Y|Y|Y|Y|Y|Y|Y|  4 | | |B|F|l|r|u|d|
+  1   |Y|X|y|x|1|M|R|L|  2  |X|X|X|X|X|X|X|X|  3 |Y|Y|Y|Y|Y|Y|Y|Y|  4 | | |B|F|r|l|u|d|
       |---------------|     |---------------|    |---------------|    |---------------|
 
 Byte 1: Bit7 => Y overflow
@@ -59,15 +59,15 @@ Byte 2: X Movement(9-bit 2's complement integers)
 Byte 3: Y Movement(9-bit 2's complement integers)
 Byte 4: Bit0 => the Vertical scrolling movement downward.
 	Bit1 => the Vertical scrolling movement upward.
-	Bit2 => the Vertical scrolling movement rightward.
-	Bit3 => the Vertical scrolling movement leftward.
+	Bit2 => the Horizontal scrolling movement leftward.
+	Bit3 => the Horizontal scrolling movement rightward.
         Bit4 => 1 = 4th mouse button is pressed, Forward one page.
                 0 = 4th mouse button is not pressed.
         Bit5 => 1 = 5th mouse button is pressed, Backward one page.
                 0 = 5th mouse button is not pressed.
 
 C) MSID 7:
-# FSP uses 2 packets(8 Bytes) data to represent Absolute Position
+# FSP uses 2 packets (8 Bytes) to represent Absolute Position.
   so we have PACKET NUMBER to identify packets.
   If PACKET NUMBER is 0, the packet is Packet 1.
   If PACKET NUMBER is 1, the packet is Packet 2.
@@ -129,7 +129,7 @@ Byte 3: Message Type => 0x00 (Disabled)
 Byte 4: Bit7~Bit0 => Don't Care
 
 ==============================================================================
-* Absolute position for STL3888-A0.
+* Absolute position for STL3888-Ax.
 ==============================================================================
 Packet 1 (ABSOLUTE POSITION)
    Bit 7 6 5 4 3 2 1 0       7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0
@@ -179,14 +179,14 @@ Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
         Bit5~Bit4 => y2_g
         Bit7~Bit6 => x2_g
 
-Notify Packet for STL3888-A0
+Notify Packet for STL3888-Ax
    Bit 7 6 5 4 3 2 1 0       7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0
 BYTE  |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
   1   |1|0|1|P|1|M|R|L|  2  |C|C|C|C|C|C|C|C|  3 |0|0|F|F|0|0|0|i|  4 |r|l|d|u|0|0|0|0|
       |---------------|     |---------------|    |---------------|    |---------------|
 
 Byte 1: Bit7~Bit6 => 00, Normal data packet
-                  => 01, Absolute coordination packet
+                  => 01, Absolute coordinates packet
                   => 10, Notify packet
         Bit5 => 1
         Bit4 => when in absolute coordinates mode (valid when EN_PKT_GO is 1):
@@ -205,15 +205,106 @@ Byte 4: Bit7 => scroll right button
         Bit6 => scroll left button
         Bit5 => scroll down button
         Bit4 => scroll up button
-            * Note that if gesture and additional button (Bit4~Bit7)
-	      happen at the same time, the button information will not
-	      be sent.
+            * Note that if gesture and additional buttoni (Bit4~Bit7)
+              happen at the same time, the button information will not
+              be sent.
+        Bit3~Bit0 => Reserved
+
+Sample sequence of Multi-finger, Multi-coordinate mode:
+
+	notify packet (valid bit == 1), abs pkt 1, abs pkt 2, abs pkt 1,
+	abs pkt 2, ..., notify packet (valid bit == 0)
+
+==============================================================================
+* Absolute position for STL3888-B0.
+==============================================================================
+Packet 1(ABSOLUTE POSITION)
+   Bit 7 6 5 4 3 2 1 0       7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0
+BYTE  |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+  1   |0|1|V|F|1|0|R|L|  2  |X|X|X|X|X|X|X|X|  3 |Y|Y|Y|Y|Y|Y|Y|Y|  4 |r|l|u|d|X|X|Y|Y|
+      |---------------|     |---------------|    |---------------|    |---------------|
+
+Byte 1: Bit7~Bit6 => 00, Normal data packet
+                  => 01, Absolute coordinates packet
+                  => 10, Notify packet
+        Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
+                When both fingers are up, the last two reports have zero valid
+                bit.
+        Bit4 => finger up/down information. 1: finger down, 0: finger up.
+        Bit3 => 1
+        Bit2 => finger index, 0 is the first finger, 1 is the second finger.
+        Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+        Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+Byte 2: X coordinate (xpos[9:2])
+Byte 3: Y coordinate (ypos[9:2])
+Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
+        Bit3~Bit2 => X coordinate (ypos[1:0])
+        Bit4 => scroll down button
+        Bit5 => scroll up button
+        Bit6 => scroll left button
+        Bit7 => scroll right button
+
+Packet 2 (ABSOLUTE POSITION)
+   Bit 7 6 5 4 3 2 1 0       7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0
+BYTE  |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+  1   |0|1|V|F|1|1|R|L|  2  |X|X|X|X|X|X|X|X|  3 |Y|Y|Y|Y|Y|Y|Y|Y|  4 |r|l|u|d|X|X|Y|Y|
+      |---------------|     |---------------|    |---------------|    |---------------|
+
+Byte 1: Bit7~Bit6 => 00, Normal data packet
+                  => 01, Absolute coordination packet
+                  => 10, Notify packet
+        Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
+                When both fingers are up, the last two reports have zero valid
+                bit.
+        Bit4 => finger up/down information. 1: finger down, 0: finger up.
+        Bit3 => 1
+        Bit2 => finger index, 0 is the first finger, 1 is the second finger.
+        Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+        Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+Byte 2: X coordinate (xpos[9:2])
+Byte 3: Y coordinate (ypos[9:2])
+Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
+        Bit3~Bit2 => X coordinate (ypos[1:0])
+        Bit4 => scroll down button
+        Bit5 => scroll up button
+        Bit6 => scroll left button
+        Bit7 => scroll right button
+
+Notify Packet for STL3888-B0
+   Bit 7 6 5 4 3 2 1 0       7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0
+BYTE  |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+  1   |1|0|1|P|1|M|R|L|  2  |C|C|C|C|C|C|C|C|  3 |0|0|F|F|0|0|0|i|  4 |r|l|u|d|0|0|0|0|
+      |---------------|     |---------------|    |---------------|    |---------------|
+
+Byte 1: Bit7~Bit6 => 00, Normal data packet
+                  => 01, Absolute coordination packet
+                  => 10, Notify packet
+        Bit5 => 1
+        Bit4 => when in absolute coordinate mode (valid when EN_PKT_GO is 1):
+                0: left button is generated by the on-pad command
+                1: left button is generated by the external button
+        Bit3 => 1
+        Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
+        Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+        Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+Byte 2: Message Type => 0xB7 (Multi Finger, Multi Coordinate mode)
+Byte 3: Bit7~Bit6 => Don't care
+        Bit5~Bit4 => Number of fingers
+        Bit3~Bit1 => Reserved
+        Bit0 => 1: enter gesture mode; 0: leaving gesture mode
+Byte 4: Bit7 => scroll right button
+        Bit6 => scroll left button
+        Bit5 => scroll up button
+        Bit4 => scroll down button
+            * Note that if gesture and additional button(Bit4~Bit7)
+              happen at the same time, the button information will not
+              be sent.
         Bit3~Bit0 => Reserved
 
 Sample sequence of Multi-finger, Multi-coordinate mode:
 
 	notify packet (valid bit == 1), abs pkt 1, abs pkt 2, abs pkt 1,
-	abs pkt 2, ..., notify packet(valid bit == 0)
+	abs pkt 2, ..., notify packet (valid bit == 0)
 
 ==============================================================================
 * FSP Enable/Disable packet
@@ -409,7 +500,8 @@ offset	width		default	r/w	name
 					0: read only, 1: read/write enable
 	(Note that following registers does not require clock gating being
 	enabled prior to write: 05 06 07 08 09 0c 0f 10 11 12 16 17 18 23 2e
-	40 41 42 43.)
+	40 41 42 43.  In addition to that, this bit must be 1 when gesture
+	mode is enabled)
 
 0x31				RW	on-pad command detection
 	bit7		0	RW	on-pad command left button down tag
@@ -463,6 +555,10 @@ offset	width		default	r/w	name
 	absolute coordinates; otherwise, host only receives packets with
 	relative coordinate.)
 
+	bit7		0	RW	EN_PS2_F2: PS/2 gesture mode 2nd
+					finger packet enable
+					0: disable, 1: enable
+
 0x43				RW	on-pad control
 	bit0		0	RW	on-pad control enable
 					0: disable, 1: enable

arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h

@@ -5,6 +5,8 @@
 #ifndef __ASM_ARCH_EP93XX_KEYPAD_H
 #define __ASM_ARCH_EP93XX_KEYPAD_H
 
+struct matrix_keymap_data;
+
 /* flags for the ep93xx_keypad driver */
 #define EP93XX_KEYPAD_DISABLE_3_KEY	(1<<0)	/* disable 3-key reset */
 #define EP93XX_KEYPAD_DIAG_MODE		(1<<1)	/* diagnostic mode */
@@ -15,15 +17,13 @@
 
 /**
  * struct ep93xx_keypad_platform_data - platform specific device structure
- * @matrix_key_map:		array of keycodes defining the keypad matrix
- * @matrix_key_map_size:	ARRAY_SIZE(matrix_key_map)
- * @debounce:			debounce start count; terminal count is 0xff
- * @prescale:			row/column counter pre-scaler load value
- * @flags:			see above
+ * @keymap_data:	pointer to &matrix_keymap_data
+ * @debounce:		debounce start count; terminal count is 0xff
+ * @prescale:		row/column counter pre-scaler load value
+ * @flags:		see above
  */
 struct ep93xx_keypad_platform_data {
-	unsigned int	*matrix_key_map;
-	int		matrix_key_map_size;
+	struct matrix_keymap_data *keymap_data;
 	unsigned int	debounce;
 	unsigned int	prescale;
 	unsigned int	flags;

drivers/char/keyboard.c

@@ -1185,11 +1185,6 @@ static void kbd_keycode(unsigned int keycode, int down, int hw_raw)
 
 	rep = (down == 2);
 
-#ifdef CONFIG_MAC_EMUMOUSEBTN
-	if (mac_hid_mouse_emulate_buttons(1, keycode, down))
-		return;
-#endif /* CONFIG_MAC_EMUMOUSEBTN */
-
 	if ((raw_mode = (kbd->kbdmode == VC_RAW)) && !hw_raw)
 		if (emulate_raw(vc, keycode, !down << 7))
 			if (keycode < BTN_MISC && printk_ratelimit())
@@ -1328,6 +1323,21 @@ static void kbd_event(struct input_handle *handle, unsigned int event_type,
 	schedule_console_callback();
 }
 
+static bool kbd_match(struct input_handler *handler, struct input_dev *dev)
+{
+	int i;
+
+	if (test_bit(EV_SND, dev->evbit))
+		return true;
+
+	if (test_bit(EV_KEY, dev->evbit))
+		for (i = KEY_RESERVED; i < BTN_MISC; i++)
+			if (test_bit(i, dev->keybit))
+				return true;
+
+	return false;
+}
+
 /*
  * When a keyboard (or other input device) is found, the kbd_connect
  * function is called. The function then looks at the device, and if it
@@ -1339,14 +1349,6 @@ static int kbd_connect(struct input_handler *handler, struct input_dev *dev,
 {
 	struct input_handle *handle;
 	int error;
-	int i;
-
-	for (i = KEY_RESERVED; i < BTN_MISC; i++)
-		if (test_bit(i, dev->keybit))
-			break;
-
-	if (i == BTN_MISC && !test_bit(EV_SND, dev->evbit))
-		return -ENODEV;
 
 	handle = kzalloc(sizeof(struct input_handle), GFP_KERNEL);
 	if (!handle)
@@ -1412,6 +1414,7 @@ MODULE_DEVICE_TABLE(input, kbd_ids);
 
 static struct input_handler kbd_handler = {
 	.event		= kbd_event,
+	.match		= kbd_match,
 	.connect	= kbd_connect,
 	.disconnect	= kbd_disconnect,
 	.start		= kbd_start,

drivers/input/evdev.c

@@ -278,6 +278,8 @@ static int evdev_open(struct inode *inode, struct file *file)
 		goto err_free_client;
 
 	file->private_data = client;
+	nonseekable_open(inode, file);
+
 	return 0;
 
  err_free_client:

drivers/input/gameport/emu10k1-gp.c

@@ -46,7 +46,7 @@ struct emu {
 	int size;
 };
 
-static struct pci_device_id emu_tbl[] = {
+static const struct pci_device_id emu_tbl[] = {
 
 	{ 0x1102, 0x7002, PCI_ANY_ID, PCI_ANY_ID }, /* SB Live gameport */
 	{ 0x1102, 0x7003, PCI_ANY_ID, PCI_ANY_ID }, /* Audigy gameport */

drivers/input/gameport/fm801-gp.c

@@ -140,7 +140,7 @@ static void __devexit fm801_gp_remove(struct pci_dev *pci)
 	}
 }
 
-static struct pci_device_id fm801_gp_id_table[] = {
+static const struct pci_device_id fm801_gp_id_table[] = {
 	{ PCI_VENDOR_ID_FORTEMEDIA, PCI_DEVICE_ID_FM801_GP, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0  },
 	{ 0 }
 };