MIPS: JZ4740: use Ingenic SoC UART driver

Remove the serial support from arch/mips/jz4740 & make use of the new
Ingenic SoC UART driver. This is done for both regular & early console
output.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: linux-kernel@vger.kernel.org
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Apelete Seketeli <apelete@seketeli.net>
Cc: Alexandre Courbot <gnurou@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/10160/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/Kconfig

@@ -297,7 +297,6 @@ config MACH_INGENIC
 	select DMA_NONCOHERENT
 	select IRQ_MIPS_CPU
 	select ARCH_REQUIRE_GPIOLIB
-	select SYS_HAS_EARLY_PRINTK
 	select COMMON_CLK
 	select GENERIC_IRQ_CHIP
 	select BUILTIN_DTB

arch/mips/boot/dts/ingenic/jz4740.dtsi

@@ -43,4 +43,26 @@
 
 		#clock-cells = <1>;
 	};
+
+	uart0: serial@10030000 {
+		compatible = "ingenic,jz4740-uart";
+		reg = <0x10030000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <9>;
+
+		clocks = <&ext>, <&cgu JZ4740_CLK_UART0>;
+		clock-names = "baud", "module";
+	};
+
+	uart1: serial@10031000 {
+		compatible = "ingenic,jz4740-uart";
+		reg = <0x10031000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <8>;
+
+		clocks = <&ext>, <&cgu JZ4740_CLK_UART1>;
+		clock-names = "baud", "module";
+	};
 };

arch/mips/boot/dts/ingenic/qi_lb60.dts

@@ -4,6 +4,10 @@
 
 / {
 	compatible = "qi,lb60", "ingenic,jz4740";
+
+	chosen {
+		stdout-path = &uart0;
+	};
 };
 
 &ext {

arch/mips/configs/qi_lb60_defconfig

@@ -66,6 +66,7 @@ CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_DMA is not set
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_INGENIC=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_SPI=y
 CONFIG_SPI_GPIO=y

arch/mips/include/asm/mach-jz4740/platform.h

@@ -35,6 +35,4 @@ extern struct platform_device jz4740_wdt_device;
 extern struct platform_device jz4740_pwm_device;
 extern struct platform_device jz4740_dma_device;
 
-void jz4740_serial_device_register(void);
-
 #endif

arch/mips/jz4740/Makefile

@@ -5,7 +5,7 @@
 # Object file lists.
 
 obj-y += prom.o time.o reset.o setup.o \
-	gpio.o platform.o timer.o serial.o
+	gpio.o platform.o timer.o
 
 CFLAGS_setup.o = -I$(src)/../../../scripts/dtc/libfdt
 

arch/mips/jz4740/board-qi_lb60.c

@@ -482,8 +482,6 @@ static int __init qi_lb60_init_platform_devices(void)
 	gpiod_add_lookup_table(&qi_lb60_audio_gpio_table);
 	gpiod_add_lookup_table(&qi_lb60_nand_gpio_table);
 
-	jz4740_serial_device_register();
-
 	spi_register_board_info(qi_lb60_spi_board_info,
 				ARRAY_SIZE(qi_lb60_spi_board_info));
 

arch/mips/jz4740/platform.c

@@ -30,7 +30,6 @@
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
 
-#include "serial.h"
 #include "clock.h"
 
 /* OHCI controller */
@@ -280,50 +279,6 @@ struct platform_device jz4740_adc_device = {
 	.resource	= jz4740_adc_resources,
 };
 
-/* Serial */
-#define JZ4740_UART_DATA(_id) \
-	{ \
-		.flags = UPF_SKIP_TEST | UPF_IOREMAP | UPF_FIXED_TYPE, \
-		.iotype = UPIO_MEM, \
-		.regshift = 2, \
-		.serial_out = jz4740_serial_out, \
-		.type = PORT_16550, \
-		.mapbase = JZ4740_UART ## _id ## _BASE_ADDR, \
-		.irq = JZ4740_IRQ_UART ## _id, \
-	}
-
-static struct plat_serial8250_port jz4740_uart_data[] = {
-	JZ4740_UART_DATA(0),
-	JZ4740_UART_DATA(1),
-	{},
-};
-
-static struct platform_device jz4740_uart_device = {
-	.name = "serial8250",
-	.id = 0,
-	.dev = {
-		.platform_data = jz4740_uart_data,
-	},
-};
-
-void jz4740_serial_device_register(void)
-{
-	struct plat_serial8250_port *p;
-	struct clk *ext_clk;
-	unsigned long ext_rate;
-
-	ext_clk = clk_get(NULL, "ext");
-	if (IS_ERR(ext_clk))
-		panic("unable to get ext clock");
-	ext_rate = clk_get_rate(ext_clk);
-	clk_put(ext_clk);
-
-	for (p = jz4740_uart_data; p->flags != 0; ++p)
-		p->uartclk = ext_rate;
-
-	platform_device_register(&jz4740_uart_device);
-}
-
 /* Watchdog */
 static struct resource jz4740_wdt_resources[] = {
 	{

arch/mips/jz4740/prom.c

@@ -53,16 +53,3 @@ void __init prom_init(void)
 void __init prom_free_prom_memory(void)
 {
 }
-
-#define UART_REG(_reg) ((void __iomem *)CKSEG1ADDR(JZ4740_UART0_BASE_ADDR + (_reg << 2)))
-
-void prom_putchar(char c)
-{
-	uint8_t lsr;
-
-	do {
-		lsr = readb(UART_REG(UART_LSR));
-	} while ((lsr & UART_LSR_TEMT) == 0);
-
-	writeb(c, UART_REG(UART_TX));
-}