Merge tag 'iio-fixes-for-4.9a' of git://git.kernel.org/pub/scm/linux/…

…kernel/git/jic23/iio into staging-linus

Jonathan writes:

First set of IIO fixes for the 4.9 cycle.

* atlas chemical
  - Fix alignment of big endian values in a larger storage (by using the right
  size storage)
* maxim thermocouple
  - Fix alignment of big endian values in larger (by using the correct
  sized storage).
* sca3000
  - Handle unexpected mode values.
* ti-adc081
  - Select IIO_TRIGGERED_BUFFER to avoid build errors

drivers/iio/adc/Kconfig

@@ -437,6 +437,8 @@ config STX104
 config TI_ADC081C
 	tristate "Texas Instruments ADC081C/ADC101C/ADC121C family"
 	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 	help
 	  If you say yes here you get support for Texas Instruments ADC081C,
 	  ADC101C and ADC121C ADC chips.

drivers/iio/chemical/atlas-ph-sensor.c

@@ -213,13 +213,14 @@ static int atlas_check_ec_calibration(struct atlas_data *data)
 	struct device *dev = &data->client->dev;
 	int ret;
 	unsigned int val;
+	__be16	rval;
 
-	ret = regmap_bulk_read(data->regmap, ATLAS_REG_EC_PROBE, &val, 2);
+	ret = regmap_bulk_read(data->regmap, ATLAS_REG_EC_PROBE, &rval, 2);
 	if (ret)
 		return ret;
 
-	dev_info(dev, "probe set to K = %d.%.2d", be16_to_cpu(val) / 100,
-						 be16_to_cpu(val) % 100);
+	val = be16_to_cpu(rval);
+	dev_info(dev, "probe set to K = %d.%.2d", val / 100, val % 100);
 
 	ret = regmap_read(data->regmap, ATLAS_REG_EC_CALIB_STATUS, &val);
 	if (ret)

drivers/iio/temperature/maxim_thermocouple.c

@@ -123,22 +123,24 @@ static int maxim_thermocouple_read(struct maxim_thermocouple_data *data,
 {
 	unsigned int storage_bytes = data->chip->read_size;
 	unsigned int shift = chan->scan_type.shift + (chan->address * 8);
-	unsigned int buf;
+	__be16 buf16;
+	__be32 buf32;
 	int ret;
 
-	ret = spi_read(data->spi, (void *) &buf, storage_bytes);
-	if (ret)
-		return ret;
-
 	switch (storage_bytes) {
 	case 2:
-		*val = be16_to_cpu(buf);
+		ret = spi_read(data->spi, (void *)&buf16, storage_bytes);
+		*val = be16_to_cpu(buf16);
 		break;
 	case 4:
-		*val = be32_to_cpu(buf);
+		ret = spi_read(data->spi, (void *)&buf32, storage_bytes);
+		*val = be32_to_cpu(buf32);
 		break;
 	}
 
+	if (ret)
+		return ret;
+
 	/* check to be sure this is a valid reading */
 	if (*val & data->chip->status_bit)
 		return -EINVAL;

drivers/staging/iio/accel/sca3000_core.c

@@ -468,6 +468,8 @@ static inline int __sca3000_get_base_freq(struct sca3000_state *st,
 	case SCA3000_MEAS_MODE_OP_2:
 		*base_freq = info->option_mode_2_freq;
 		break;
+	default:
+		ret = -EINVAL;
 	}
 error_ret:
 	return ret;