Merge branches 'acpi-button', 'acpi-battery' and 'acpi-doc'

* acpi-button:
  ACPI / button: Add document for ACPI control method lid device restrictions
  ACPI / button: Fix an issue in button.lid_init_state=ignore mode

* acpi-battery:
  ACPI / battery: Add sysfs representation after checking _BST

* acpi-doc:
  ACPI / documentation: Use recommended name in GPIO property names

Documentation/acpi/acpi-lid.txt

@@ -0,0 +1,96 @@
+Special Usage Model of the ACPI Control Method Lid Device
+
+Copyright (C) 2016, Intel Corporation
+Author: Lv Zheng <lv.zheng@intel.com>
+
+
+Abstract:
+
+Platforms containing lids convey lid state (open/close) to OSPMs using a
+control method lid device. To implement this, the AML tables issue
+Notify(lid_device, 0x80) to notify the OSPMs whenever the lid state has
+changed. The _LID control method for the lid device must be implemented to
+report the "current" state of the lid as either "opened" or "closed".
+
+For most platforms, both the _LID method and the lid notifications are
+reliable. However, there are exceptions. In order to work with these
+exceptional buggy platforms, special restrictions and expections should be
+taken into account. This document describes the restrictions and the
+expections of the Linux ACPI lid device driver.
+
+
+1. Restrictions of the returning value of the _LID control method
+
+The _LID control method is described to return the "current" lid state.
+However the word of "current" has ambiguity, some buggy AML tables return
+the lid state upon the last lid notification instead of returning the lid
+state upon the last _LID evaluation. There won't be difference when the
+_LID control method is evaluated during the runtime, the problem is its
+initial returning value. When the AML tables implement this control method
+with cached value, the initial returning value is likely not reliable.
+There are platforms always retun "closed" as initial lid state.
+
+2. Restrictions of the lid state change notifications
+
+There are buggy AML tables never notifying when the lid device state is
+changed to "opened". Thus the "opened" notification is not guaranteed. But
+it is guaranteed that the AML tables always notify "closed" when the lid
+state is changed to "closed". The "closed" notification is normally used to
+trigger some system power saving operations on Windows. Since it is fully
+tested, it is reliable from all AML tables.
+
+3. Expections for the userspace users of the ACPI lid device driver
+
+The ACPI button driver exports the lid state to the userspace via the
+following file:
+  /proc/acpi/button/lid/LID0/state
+This file actually calls the _LID control method described above. And given
+the previous explanation, it is not reliable enough on some platforms. So
+it is advised for the userspace program to not to solely rely on this file
+to determine the actual lid state.
+
+The ACPI button driver emits the following input event to the userspace:
+  SW_LID
+The ACPI lid device driver is implemented to try to deliver the platform
+triggered events to the userspace. However, given the fact that the buggy
+firmware cannot make sure "opened"/"closed" events are paired, the ACPI
+button driver uses the following 3 modes in order not to trigger issues.
+
+If the userspace hasn't been prepared to ignore the unreliable "opened"
+events and the unreliable initial state notification, Linux users can use
+the following kernel parameters to handle the possible issues:
+A. button.lid_init_state=method:
+   When this option is specified, the ACPI button driver reports the
+   initial lid state using the returning value of the _LID control method
+   and whether the "opened"/"closed" events are paired fully relies on the
+   firmware implementation.
+   This option can be used to fix some platforms where the returning value
+   of the _LID control method is reliable but the initial lid state
+   notification is missing.
+   This option is the default behavior during the period the userspace
+   isn't ready to handle the buggy AML tables.
+B. button.lid_init_state=open:
+   When this option is specified, the ACPI button driver always reports the
+   initial lid state as "opened" and whether the "opened"/"closed" events
+   are paired fully relies on the firmware implementation.
+   This may fix some platforms where the returning value of the _LID
+   control method is not reliable and the initial lid state notification is
+   missing.
+
+If the userspace has been prepared to ignore the unreliable "opened" events
+and the unreliable initial state notification, Linux users should always
+use the following kernel parameter:
+C. button.lid_init_state=ignore:
+   When this option is specified, the ACPI button driver never reports the
+   initial lid state and there is a compensation mechanism implemented to
+   ensure that the reliable "closed" notifications can always be delievered
+   to the userspace by always pairing "closed" input events with complement
+   "opened" input events. But there is still no guarantee that the "opened"
+   notifications can be delivered to the userspace when the lid is actually
+   opens given that some AML tables do not send "opened" notifications
+   reliably.
+   In this mode, if everything is correctly implemented by the platform
+   firmware, the old userspace programs should still work. Otherwise, the
+   new userspace programs are required to work with the ACPI button driver.
+   This option will be the default behavior after the userspace is ready to
+   handle the buggy AML tables.

Documentation/acpi/gpio-properties.txt

@@ -28,8 +28,8 @@ index, like the ASL example below shows:
           ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
           Package ()
 	  {
-              Package () {"reset-gpio", Package() {^BTH, 1, 1, 0 }},
-              Package () {"shutdown-gpio", Package() {^BTH, 0, 0, 0 }},
+              Package () {"reset-gpios", Package() {^BTH, 1, 1, 0 }},
+              Package () {"shutdown-gpios", Package() {^BTH, 0, 0, 0 }},
           }
       })
   }
@@ -48,7 +48,7 @@ Since ACPI GpioIo() resource does not have a field saying whether it is
 active low or high, the "active_low" argument can be used here.  Setting
 it to 1 marks the GPIO as active low.
 
-In our Bluetooth example the "reset-gpio" refers to the second GpioIo()
+In our Bluetooth example the "reset-gpios" refers to the second GpioIo()
 resource, second pin in that resource with the GPIO number of 31.
 
 ACPI GPIO Mappings Provided by Drivers
@@ -83,8 +83,8 @@ static const struct acpi_gpio_params reset_gpio = { 1, 1, false };
 static const struct acpi_gpio_params shutdown_gpio = { 0, 0, false };
 
 static const struct acpi_gpio_mapping bluetooth_acpi_gpios[] = {
-  { "reset-gpio", &reset_gpio, 1 },
-  { "shutdown-gpio", &shutdown_gpio, 1 },
+  { "reset-gpios", &reset_gpio, 1 },
+  { "shutdown-gpios", &shutdown_gpio, 1 },
   { },
 };
 

drivers/acpi/battery.c

@@ -733,15 +733,17 @@ static int acpi_battery_update(struct acpi_battery *battery, bool resume)
 			return result;
 		acpi_battery_init_alarm(battery);
 	}
+
+	result = acpi_battery_get_state(battery);
+	if (result)
+		return result;
+	acpi_battery_quirks(battery);
+
 	if (!battery->bat) {
 		result = sysfs_add_battery(battery);
 		if (result)
 			return result;
 	}
-	result = acpi_battery_get_state(battery);
-	if (result)
-		return result;
-	acpi_battery_quirks(battery);
 
 	/*
 	 * Wakeup the system if battery is critical low

drivers/acpi/button.c

@@ -19,6 +19,8 @@
  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  */
 
+#define pr_fmt(fmt) "ACPI : button: " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -104,13 +106,19 @@ struct acpi_button {
 	struct input_dev *input;
 	char phys[32];			/* for input device */
 	unsigned long pushed;
+	int last_state;
+	ktime_t last_time;
 	bool suspended;
 };
 
 static BLOCKING_NOTIFIER_HEAD(acpi_lid_notifier);
 static struct acpi_device *lid_device;
 static u8 lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
 
+static unsigned long lid_report_interval __read_mostly = 500;
+module_param(lid_report_interval, ulong, 0644);
+MODULE_PARM_DESC(lid_report_interval, "Interval (ms) between lid key events");
+
 /* --------------------------------------------------------------------------
                               FS Interface (/proc)
    -------------------------------------------------------------------------- */
@@ -134,10 +142,79 @@ static int acpi_lid_notify_state(struct acpi_device *device, int state)
 {
 	struct acpi_button *button = acpi_driver_data(device);
 	int ret;
+	ktime_t next_report;
+	bool do_update;
+
+	/*
+	 * In lid_init_state=ignore mode, if user opens/closes lid
+	 * frequently with "open" missing, and "last_time" is also updated
+	 * frequently, "close" cannot be delivered to the userspace.
+	 * So "last_time" is only updated after a timeout or an actual
+	 * switch.
+	 */
+	if (lid_init_state != ACPI_BUTTON_LID_INIT_IGNORE ||
+	    button->last_state != !!state)
+		do_update = true;
+	else
+		do_update = false;
+
+	next_report = ktime_add(button->last_time,
+				ms_to_ktime(lid_report_interval));
+	if (button->last_state == !!state &&
+	    ktime_after(ktime_get(), next_report)) {
+		/* Complain the buggy firmware */
+		pr_warn_once("The lid device is not compliant to SW_LID.\n");
 
-	/* input layer checks if event is redundant */
-	input_report_switch(button->input, SW_LID, !state);
-	input_sync(button->input);
+		/*
+		 * Send the unreliable complement switch event:
+		 *
+		 * On most platforms, the lid device is reliable. However
+		 * there are exceptions:
+		 * 1. Platforms returning initial lid state as "close" by
+		 *    default after booting/resuming:
+		 *     https://bugzilla.kernel.org/show_bug.cgi?id=89211
+		 *     https://bugzilla.kernel.org/show_bug.cgi?id=106151
+		 * 2. Platforms never reporting "open" events:
+		 *     https://bugzilla.kernel.org/show_bug.cgi?id=106941
+		 * On these buggy platforms, the usage model of the ACPI
+		 * lid device actually is:
+		 * 1. The initial returning value of _LID may not be
+		 *    reliable.
+		 * 2. The open event may not be reliable.
+		 * 3. The close event is reliable.
+		 *
+		 * But SW_LID is typed as input switch event, the input
+		 * layer checks if the event is redundant. Hence if the
+		 * state is not switched, the userspace cannot see this
+		 * platform triggered reliable event. By inserting a
+		 * complement switch event, it then is guaranteed that the
+		 * platform triggered reliable one can always be seen by
+		 * the userspace.
+		 */
+		if (lid_init_state == ACPI_BUTTON_LID_INIT_IGNORE) {
+			do_update = true;
+			/*
+			 * Do generate complement switch event for "close"
+			 * as "close" is reliable and wrong "open" won't
+			 * trigger unexpected behaviors.
+			 * Do not generate complement switch event for
+			 * "open" as "open" is not reliable and wrong
+			 * "close" will trigger unexpected behaviors.
+			 */
+			if (!state) {
+				input_report_switch(button->input,
+						    SW_LID, state);
+				input_sync(button->input);
+			}
+		}
+	}
+	/* Send the platform triggered reliable event */
+	if (do_update) {
+		input_report_switch(button->input, SW_LID, !state);
+		input_sync(button->input);
+		button->last_state = !!state;
+		button->last_time = ktime_get();
+	}
 
 	if (state)
 		pm_wakeup_event(&device->dev, 0);
@@ -411,6 +488,8 @@ static int acpi_button_add(struct acpi_device *device)
 		strcpy(name, ACPI_BUTTON_DEVICE_NAME_LID);
 		sprintf(class, "%s/%s",
 			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID);
+		button->last_state = !!acpi_lid_evaluate_state(device);
+		button->last_time = ktime_get();
 	} else {
 		printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", hid);
 		error = -ENODEV;