Merge tag 'devicetree-fixes-for-5.11-2' of git://git.kernel.org/pub/s…

…cm/linux/kernel/git/robh/linux

Pull devicetree fixes from Rob Herring:

 - Cleanups on properties with standard unit suffixes

 - Fix overwriting dma_range_map if there's no 'dma-ranges' property

 - Fix a bug when creating a /chosen node from ARM ATAGs

 - Add missing properties for TI j721e USB binding

 - Several doc reference updates due to DT schema conversions

* tag 'devicetree-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: Cleanup standard unit properties
  of/device: Update dma_range_map only when dev has valid dma-ranges
  ARM: zImage: atags_to_fdt: Fix node names on added root nodes
  dt-bindings: usb: j721e: add ranges and dma-coherent props
  dt-bindings:iio:adc: update adc.yaml reference
  dt-bindings: memory: mediatek: update mediatek,smi-larb.yaml references
  dt-bindings: display: mediatek: update mediatek,dpi.yaml reference
  ASoC: audio-graph-card: update audio-graph-card.yaml reference

Documentation/devicetree/bindings/arm/cpus.yaml

@@ -232,7 +232,6 @@ properties:
       by this cpu (see ./idle-states.yaml).
 
   capacity-dmips-mhz:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
     description:
       u32 value representing CPU capacity (see ./cpu-capacity.txt) in
       DMIPS/MHz, relative to highest capacity-dmips-mhz

Documentation/devicetree/bindings/display/bridge/sii902x.txt

@@ -40,7 +40,7 @@ Optional properties:
 	documents on how to describe the way the sii902x device is
 	connected to the rest of the audio system:
 	Documentation/devicetree/bindings/sound/simple-card.yaml
-	Documentation/devicetree/bindings/sound/audio-graph-card.txt
+	Documentation/devicetree/bindings/sound/audio-graph-card.yaml
 	Note: In case of the audio-graph-card binding the used port
 	index should be 3.
 

Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt

@@ -23,7 +23,7 @@ connected to.
 
 For a description of the display interface sink function blocks, see
 Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt and
-Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt.
+Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml.
 
 Required properties (all function blocks):
 - compatible: "mediatek,<chip>-disp-<function>", one of
@@ -61,7 +61,7 @@ Required properties (DMA function blocks):
 	"mediatek,<chip>-disp-wdma"
   the supported chips are mt2701, mt8167 and mt8173.
 - larb: Should contain a phandle pointing to the local arbiter device as defined
-  in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+  in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
 - iommus: Should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
   for details.

Documentation/devicetree/bindings/extcon/wlf,arizona.yaml

@@ -85,7 +85,6 @@ properties:
   wlf,micd-timeout-ms:
     description:
       Timeout for microphone detection, specified in milliseconds.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
 
   wlf,micd-force-micbias:
     description:

Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml

@@ -49,7 +49,6 @@ properties:
     description:
       This property controls the Accumulation Dead band which allows to set the
       level of current below which no accumulation takes place.
-    $ref: /schemas/types.yaml#/definitions/uint32
     maximum: 255
     default: 0
 

Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml

@@ -73,11 +73,9 @@ properties:
     description: |
       Temperature sensor trimming factor. It can be used to manually adjust the
       temperature measurements within 7.130 degrees Celsius.
-    maxItems: 1
-    items:
-      default: 0
-      minimum: 0
-      maximum: 7130
+    default: 0
+    minimum: 0
+    maximum: 7130
 
 additionalProperties: false
 

Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml

@@ -52,7 +52,6 @@ properties:
   ti,bus-range-microvolt:
     description: |
       This is the operating range of the bus voltage in microvolt
-    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [16000000, 32000000]
     default: 32000000
 

Documentation/devicetree/bindings/i2c/i2c-gpio.yaml

@@ -39,11 +39,9 @@ properties:
 
   i2c-gpio,delay-us:
     description: delay between GPIO operations (may depend on each platform)
-    $ref: /schemas/types.yaml#/definitions/uint32
 
   i2c-gpio,timeout-ms:
     description: timeout to get data
-    $ref: /schemas/types.yaml#/definitions/uint32
 
   # Deprecated properties, do not use in new device tree sources:
   gpios:

Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml

@@ -66,21 +66,18 @@ properties:
     default: 400000
 
   i2c-sda-hold-time-ns:
-    maxItems: 1
     description: |
       The property should contain the SDA hold time in nanoseconds. This option
       is only supported in hardware blocks version 1.11a or newer or on
       Microsemi SoCs.
 
   i2c-scl-falling-time-ns:
-    maxItems: 1
     description: |
       The property should contain the SCL falling time in nanoseconds.
       This value is used to compute the tLOW period.
     default: 300
 
   i2c-sda-falling-time-ns:
-    maxItems: 1
     description: |
       The property should contain the SDA falling time in nanoseconds.
       This value is used to compute the tHIGH period.

Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml

@@ -80,7 +80,7 @@ properties:
     type: boolean
 
   bipolar:
-    description: see Documentation/devicetree/bindings/iio/adc/adc.txt
+    description: see Documentation/devicetree/bindings/iio/adc/adc.yaml
     type: boolean
 
 required:

Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml

@@ -23,7 +23,6 @@ properties:
     maxItems: 1
 
   shunt-resistor-micro-ohms:
-    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       Value in micro Ohms of the shunt resistor connected between the RS+ and
       RS- inputs, across which the current is measured.  Value needed to compute

Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml

@@ -246,7 +246,6 @@ patternProperties:
           Resolution (bits) to use for conversions:
             - can be 6, 8, 10 or 12 on stm32f4
             - can be 8, 10, 12, 14 or 16 on stm32h7 and stm32mp1
-        $ref: /schemas/types.yaml#/definitions/uint32
 
       st,adc-channels:
         description: |

Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml

@@ -42,7 +42,6 @@ properties:
     const: 1
 
   ti,channel0-current-microamp:
-    $ref: /schemas/types.yaml#/definitions/uint32
     description: Channel 0 current in uA.
     enum:
       - 0
@@ -51,7 +50,6 @@ properties:
       - 20
 
   ti,channel3-current-microamp:
-    $ref: /schemas/types.yaml#/definitions/uint32
     description: Channel 3 current in uA.
     enum:
       - 0

Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml

@@ -46,31 +46,42 @@ properties:
       two properties must be present:
 
   adi,range-microvolt:
-    $ref: /schemas/types.yaml#/definitions/int32-array
     description: |
       Voltage output range specified as <minimum, maximum>
-    enum:
-      - [[0, 5000000]]
-      - [[0, 10000000]]
-      - [[-5000000, 5000000]]
-      - [[-10000000, 10000000]]
+    oneOf:
+      - items:
+          - const: 0
+          - enum: [5000000, 10000000]
+      - items:
+          - const: -5000000
+          - const: 5000000
+      - items:
+          - const: -10000000
+          - const: 10000000
 
   adi,range-microamp:
-    $ref: /schemas/types.yaml#/definitions/int32-array
     description: |
       Current output range specified as <minimum, maximum>
-    enum:
-      - [[0, 20000]]
-      - [[0, 24000]]
-      - [[4, 24000]]
-      - [[-20000, 20000]]
-      - [[-24000, 24000]]
-      - [[-1000, 22000]]
+    oneOf:
+      - items:
+          - const: 0
+          - enum: [20000, 24000]
+      - items:
+          - const: 4
+          - const: 24000
+      - items:
+          - const: -20000
+          - const: 20000
+      - items:
+          - const: -24000
+          - const: 24000
+      - items:
+          - const: -1000
+          - const: 22000
 
   reset-gpios: true
 
   adi,dc-dc-ilim-microamp:
-    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [150000, 200000, 250000, 300000, 350000, 400000]
     description: |
       The dc-to-dc converter current limit.

Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml

@@ -21,7 +21,6 @@ properties:
     description: Connected to ADC_RDY pin.
 
   maxim,led-current-microamp:
-    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 2
     maxItems: 2
     description: |

Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml

@@ -70,11 +70,9 @@ properties:
 
   touchscreen-x-mm:
     description: horizontal length in mm of the touchscreen
-    $ref: /schemas/types.yaml#/definitions/uint32
 
   touchscreen-y-mm:
     description: vertical length in mm of the touchscreen
-    $ref: /schemas/types.yaml#/definitions/uint32
 
 dependencies:
   touchscreen-size-x: [ touchscreen-size-y ]

Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt

@@ -16,7 +16,7 @@ Required properties:
 - power-domains: a phandle to the power domain, see
   Documentation/devicetree/bindings/power/power_domain.txt for details.
 - mediatek,larb: must contain the local arbiters in the current Socs, see
-  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
   for details.
 - iommus: should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt

Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt

@@ -14,7 +14,7 @@ Required properties:
 - power-domains: a phandle to the power domain, see
   Documentation/devicetree/bindings/power/power_domain.txt for details.
 - mediatek,larb: must contain the local arbiters in the current SoCs, see
-  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
   for details.
 - iommus: should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt

Documentation/devicetree/bindings/media/mediatek-mdp.txt

@@ -28,7 +28,7 @@ Required properties (DMA function blocks, child node):
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
   for details.
 - mediatek,larb: must contain the local arbiters in the current Socs, see
-  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
   for details.
 
 Example:

Documentation/devicetree/bindings/mmc/mmc-controller.yaml

@@ -259,7 +259,6 @@ properties:
       waiting for I/O signalling and card power supply to be stable,
       regardless of whether pwrseq-simple is used. Default to 10ms if
       no available.
-    $ref: /schemas/types.yaml#/definitions/uint32
     default: 10
 
   supports-cqe:

Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml

@@ -41,13 +41,11 @@ properties:
     description:
       Delay in ms after powering the card and de-asserting the
       reset-gpios (if any).
-    $ref: /schemas/types.yaml#/definitions/uint32
 
   power-off-delay-us:
     description:
       Delay in us after asserting the reset-gpios (if any)
       during power off of the card.
-    $ref: /schemas/types.yaml#/definitions/uint32
 
 required:
   - compatible

Documentation/devicetree/bindings/net/ethernet-controller.yaml

@@ -122,7 +122,6 @@ properties:
       such as flow control thresholds.
 
   rx-internal-delay-ps:
-    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       RGMII Receive Clock Delay defined in pico seconds.
       This is used for controllers that have configurable RX internal delays.
@@ -140,7 +139,6 @@ properties:
       is used for components that can have configurable fifo sizes.
 
   tx-internal-delay-ps:
-    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       RGMII Transmit Clock Delay defined in pico seconds.
       This is used for controllers that have configurable TX internal delays.

Documentation/devicetree/bindings/net/snps,dwmac.yaml

@@ -212,7 +212,6 @@ properties:
       Triplet of delays. The 1st cell is reset pre-delay in micro
       seconds. The 2nd cell is reset pulse in micro seconds. The 3rd
       cell is reset post-delay in micro seconds.
-    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 3
     maxItems: 3
 

Documentation/devicetree/bindings/power/supply/battery.yaml

@@ -83,21 +83,18 @@ properties:
       for each of the battery capacity lookup table.
 
   operating-range-celsius:
-    $ref: /schemas/types.yaml#/definitions/uint32-array
     description: operating temperature range of a battery
     items:
       - description: minimum temperature at which battery can operate
       - description: maximum temperature at which battery can operate
 
   ambient-celsius:
-    $ref: /schemas/types.yaml#/definitions/uint32-array
     description: safe range of ambient temperature
     items:
       - description: alert when ambient temperature is lower than this value
       - description: alert when ambient temperature is higher than this value
 
   alert-celsius:
-    $ref: /schemas/types.yaml#/definitions/uint32-array
     description: safe range of battery temperature
     items:
       - description: alert when battery temperature is lower than this value

Documentation/devicetree/bindings/power/supply/bq2515x.yaml

@@ -50,7 +50,6 @@ properties:
     maxItems: 1
 
   input-current-limit-microamp:
-    $ref: /schemas/types.yaml#/definitions/uint32
     description: Maximum input current in micro Amps.
     minimum: 50000
     maximum: 500000

Documentation/devicetree/bindings/regulator/dlg,da9121.yaml

@@ -62,7 +62,6 @@ properties:
     description: IRQ line information.
 
   dlg,irq-polling-delay-passive-ms:
-    $ref: "/schemas/types.yaml#/definitions/uint32"
     minimum: 1000
     maximum: 10000
     description: |

Documentation/devicetree/bindings/regulator/fixed-regulator.yaml

@@ -72,11 +72,9 @@ properties:
 
   startup-delay-us:
     description: startup time in microseconds
-    $ref: /schemas/types.yaml#/definitions/uint32
 
   off-on-delay-us:
     description: off delay time in microseconds
-    $ref: /schemas/types.yaml#/definitions/uint32
 
   enable-active-high:
     description:

Documentation/devicetree/bindings/rtc/rtc.yaml

@@ -27,7 +27,6 @@ properties:
       1: chargeable
 
   quartz-load-femtofarads:
-    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       The capacitive load of the quartz(x-tal), expressed in femto
       Farad (fF). The default value shall be listed (if optional),
@@ -47,7 +46,6 @@ properties:
     deprecated: true
 
   trickle-resistor-ohms:
-    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Selected resistor for trickle charger. Should be given
       if trickle charger should be enabled.

Documentation/devicetree/bindings/serial/pl011.yaml

@@ -88,14 +88,12 @@ properties:
     description:
       Rate at which poll occurs when auto-poll is set.
       default 100ms.
-    $ref: /schemas/types.yaml#/definitions/uint32
     default: 100
 
   poll-timeout-ms:
     description:
       Poll timeout when auto-poll is set, default
       3000ms.
-    $ref: /schemas/types.yaml#/definitions/uint32
     default: 3000
 
 required:

Documentation/devicetree/bindings/sound/sgtl5000.yaml

@@ -41,14 +41,12 @@ properties:
       values of 2k, 4k or 8k. If set to 0 it will be off. If this node is not
       mentioned or if the value is unknown, then micbias resistor is set to
       4k.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
     enum: [ 0, 2, 4, 8 ]
 
   micbias-voltage-m-volts:
     description: The bias voltage to be used in mVolts. The voltage can take
       values from 1.25V to 3V by 250mV steps. If this node is not mentioned
       or the value is unknown, then the value is set to 1.25V.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
     enum: [ 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000 ]
 
   lrclk-strength: